Journal of the Korean Society for Nondestructive Testing (비파괴검사학회지)

The Korean Society for Nondestructive Testing (한국비파괴검사학회)
권호 표지
DOI QR코드

DOI QR Code

Influence of Compressive Stress in TGO Layer on Impedance Spectroscopy from TBC Coatings

  • Kang, To (School of Mechanical Engineering, Sungkyunkwan University) ;
  • Zhang, Jianhai (School of Mechanical Engineering, Sungkyunkwan University) ;
  • Yuan, Maodan (School of Mechanical Engineering, Sungkyunkwan University) ;
  • Song, Sung-Jin (School of Mechanical Engineering, Sungkyunkwan University) ;
  • Kim, Hak-Joon (School of Mechanical Engineering, Sungkyunkwan University) ;
  • Kim, Yongseok (School of Mechanical Engineering, Sungkyunkwan University) ;
  • Seok, Chang Sung (School of Mechanical Engineering, Sungkyunkwan University)
  • Received : 2013.01.07
  • Accepted : 2013.02.01
  • Published : 2013.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

Impedance spectroscopy is a non-destructive evaluation (NDE) method first proposed and developed for evaluating TGO layers with compressive stress inside thermally degraded plasma-sprayed thermal barrier coatings (PS TBCs). A bode plot (phase angle (h) vs. frequency (f)) was used to investigate the TGO layer on electrical responses. In our experimental study, the phase angle of Bode plots is sensitive for detecting TGO layers while applying compressive stress on thermal barrier coatings. It is difficult to detect TGO layers in samples isothermally aged for 100 hrs and 200 hrs without compressive stress, and substantial change of phase was observed these samples with compressive stress. Also, the frequency shift of the phase angle and change of the phase angle are observed in samples isothermally aged for more than 400 hrs.

Keywords

References

  1. K. Ogawa, D. Minkov, T. Shoji, M. Sato and H. Hashimoto, "NDE of degradation of thermal barrier coating by means of impedance spectroscopy," NDT&E International Vol. 32, pp. 177-185 (1999) https://doi.org/10.1016/S0963-8695(98)00069-3
  2. J. Allen Haynes, E. Douglas Rigney, Mattison K. Ferber and Wallace D. Porter, "Oxidation and degradation of a plasmasprayed thermal barrier coating system," Surface and Coatings Technology, Vol. 86-87, pp. 102-108 (1996) https://doi.org/10.1016/S0257-8972(96)02985-4
  3. S. Umemura, M. Mori, Y. Tsukuda, E. Akita, K. Akagi and Y. Iwasaki, "Development and operating status of $1500^{\circ}C$ gas turbine," Mitsubishi Juko Giho, Vol. 35, No. 1, pp. 102-106 (1998)
  4. U. Schulz, C. Leyens, K. Fritscher, M. Peters, B. Saruhan-Brigns, O. Lavigne, J. -M. Dorvaux, M. Poulain, R. Mevrel and M. Caliez, "Some recent trends in research and technology of advanced thermal barrier coatings," Aerospace Science and Technology, Vol. 7, pp. 73-78 (2003) https://doi.org/10.1016/S1270-9638(02)00003-2
  5. M. Tanno, K. Ogawa and T. Shoji, "Influence of asymmetric electrode geometry on an impedance spectrum of a plasma sprayed thermal barrier coating system," Surface & Coatings Technology, Vol. 204, pp. 2504-2509 (2010) https://doi.org/10.1016/j.surfcoat.2010.01.030
  6. A. G. Evans, M. Y. He and J. W. Hutchinson, "Mechanics-based scaling laws for the durability of thermal barrier coatings," Progress in Materials Science, Vol. 46, pp. 249-271 (2001) https://doi.org/10.1016/S0079-6425(00)00007-4
  7. A. G. Evans, D. R. Mumm, J. W. Hutchinson, G. H. Meier and F. S. Pettit, "Mechanism controlling the durability of thermal barrier coatings," Progress in Materials Science, Vol. 46, pp. 505-553 (2001) https://doi.org/10.1016/S0079-6425(00)00020-7
  8. N. Q. Wu, K. Ogawa, M. Chyu and S. X. Mao, "Failure detection of thermal barrier coatings using impedance spectroscopy," Thin Solid Films, Vol. 457, No. 2, pp. 301-306 (2004) https://doi.org/10.1016/j.tsf.2003.10.009
  9. A. G. Evans and J. W. Hutchinson, "On the mechanics of delamination and spalling in compressed films," International Journal of Solids and Structures, Vol. 20, pp. 455-466 (1984) https://doi.org/10.1016/0020-7683(84)90012-X
  10. A. Rabiei and A. G. Evans, "Failure mechanisms associated with the thermally grown oxide in plasma-sprayed thermal barrier coatings," Acta Materialia, Vol. 48, pp. 3963-3976 (2000) https://doi.org/10.1016/S1359-6454(00)00171-3
  11. S. H. Song and P. Xiao, "An impedance spectroscopy study of high-temperature oxidation of thermal barrier coatings," Materials Science and Engineering, Vol. 97, pp. 46-53 (2003) https://doi.org/10.1016/S0921-5107(02)00397-5
  12. V. Teixeira, M. Andritschky, W. Fischer, H. P. Buchkremer and D. StoEver, "Analysis of residual stresses in thermal barrier coatings," Journal of Materials Processing Technology, Vol. 92-93, pp. 209-216 (1999) https://doi.org/10.1016/S0924-0136(99)00157-0
  13. M. Klaus, Ch. Genzel and H. Holzschuh, "Residual stress depth profiling in complex hard coating systems by X-ray diffraction," Thin Solid Films, Vol. 517, pp. 1172-1176 (2008) https://doi.org/10.1016/j.tsf.2008.05.018
  14. M. D. Yuan, T. Kang, H. J. Kim and S. J. Song, "A numerical model for prediction of residual stress using rayleigh waves," Journal of the Korean Society for Nondestructive Testing, Vol. 31, No. 6, pp. 656-664 (2011)
  15. Y. Li, Z. M. Chen, Y. Mao and Y. Qi, "Quantitative evaluation of thermal barrier coating based on eddy current technique," NDT&E International, Vol. 50, pp. 29-35 (2012) https://doi.org/10.1016/j.ndteint.2012.04.006
  16. S. J. Zhu, K. Fukuda and T. Osaki, "Residual stress in TGO and interfacial damage in thermal barrier coating after thermal exposure and cyclic indentation," Journal of Solid Mechanics and Materials Engineering, Vol. 42, pp. 244-251 (2010)
  17. V. K. Tolpygo, D. R. Clarke and K. S. Murphy, "Oxidation-induced failure of EB-PVD thermal barrier coatings," Surface & Coatings Technology, Vol. 146-147, pp. 124-131 (2001) https://doi.org/10.1016/S0257-8972(01)01482-7
  18. Y. H. Sohn, K. Vaidyanathan, M. Ronski, E. Jordan and M. Gell, "Thermal cycling of EB-PVD/MCrAlY thermal barrier coatings: II. evolution of photostimulated luminescence," Surface and Coatings Technology, Vol. 146-147, pp. 102-109 (2001) https://doi.org/10.1016/S0257-8972(01)01480-3
  19. Y. H. Sohn, R. R. Biederman, R. D. Sisson Jr., E. Y. Lee and B. A. Nagaraj, "Microstructural characterization of thermal barrier coatings on high pressure turbine blades," Surface and Coatings Technology, Vol. 146-147, pp. 132-139 (2001) https://doi.org/10.1016/S0257-8972(01)01369-X
  20. K. Witke, W. O sterle, A. Skopp and M. Woydt, "Raman microprobe spectroscopy and transmission electron microscopy of thermal sprayed $ZrO_2$ coatings before and after rub testing of outer air seals," Journal of Raman Spectroscopy, Vol. 32, pp. 1008-1014 (2001) https://doi.org/10.1002/jrs.791
  21. R. Diaz, M. Jansz, M. Mossaddad, S. Raghavan, J. Okasinski, J. Almer, Hugo P. Perez and P. Imbrie, "Role of mechanical loads in inducing in-cycle tensile stress in thermally grown oxide," Applied Physics Letters, Vol. 100, pp. 111906 (2012) https://doi.org/10.1063/1.3692592
  22. P. S. Anderson, X. Wang and P. Xiao, "Impedance spectroscopy study of plasma sprayed and EB-PVD thermal barrier coatings," Surface & Coatings Technology, Vol. 185, pp. 106-119 (2004) https://doi.org/10.1016/j.surfcoat.2003.12.022
  23. H. Huang, C. Liu, L. Y. Ni, and C. G. Zhou, "Evaluation of TGO growth in thermal barrier coatings using impedance spectroscopy," Rare Metals, Vol. 30, pp. 643-646 (2011) https://doi.org/10.1007/s12598-011-0363-z

Cited by

  1. An Effective Electrical Resonance-Based Method to Detect Delamination in Thermal Barrier Coating vol.27, pp.3, 2018, https://doi.org/10.1007/s11666-017-0670-2