Journal of Drive and Control (드라이브 ㆍ 컨트롤)

The Korean Society for Fluid Power and Construction Equipment (유공압건설기계학회)
권호 표지
DOI QR코드

DOI QR Code

Application of Lubrication Theory to Hydraulic Components Design

윤활이론을 이용한 유압부품설계

  • Published : 2013.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. Dowson, D., History of Tribology, Professional Engineering Publishing, 1998.
  2. Reynolds, O., "On the Theory of Lubrication and Its Application to Mr. Beauchamp Tower's Experiments, Including an Experimental Determination of the Viscosity of Olive Oil", Philos. Trans. R. Soc. London, Vol.177, pp. 157-234, 1886. https://doi.org/10.1098/rstl.1886.0005
  3. Hamrock, B., Fundamentals of Fluid Film Lubrication, McGraw-Hill, 1994.
  4. Meritt, H. E., Hydraulic Control Systems, John Wiley & Sons, 1967.
  5. Sweeney, D. C., "Preliminary Investigation of Hydraulic Lock", Engineering, Vol.172, pp.513-516, 1951.
  6. Manhajm, J. and Sweeney, D. C., "An Investigation of Hydraulic Lock", Proc. of Instn. Mech. Engrs., Vol.169, pp.865-879, 1955. https://doi.org/10.1243/PIME_PROC_1955_169_087_02
  7. Mannam, J., "Further Aspects of Hydraulic Lock", Proc. of Instn. Mech. Engrs., Vol.173, pp.699-716, 1959. https://doi.org/10.1243/PIME_PROC_1959_173_058_02
  8. Sweeney, D. C.,, "Eight Ways to Overcome Hydraulic Lock", Engineering, Vol.190, pp.592-593, 1960.
  9. Kettleborough, C. F., "The Effect of Pressure on Viscosity in Hydraulic Lock", Int. J. Mech. Sci., Vol.3, pp.137-142. 1961. https://doi.org/10.1016/0020-7403(61)90044-3
  10. Hessey, M. F., Martin, B. P. and Brighton, D. K., "Hydraulic Lock Forces on Tapered Pistons", Proc. Instn. Mech. Engrs., Vol.184, pp.983-992, 1969-1970.
  11. Etsion, I. and Pinkus, O., "The Hydrodynamics of a Plug Bearing", Trans. ASME, J. of Lub. Tech., Vol.98, pp.433-440, 1976. https://doi.org/10.1115/1.3452883
  12. Meikandan, N., Raman, R., Singaperumal, M. and Seetharamu, K. N., "Theoretical Analysis of Tapered Pistons in High Speed Hydraulic Actuators", Wear, Vol.137, pp.299-321, 1990. https://doi.org/10.1016/0043-1648(90)90142-W
  13. Lee, C. O. und Park, T. J., "Querkrafte an hydraulischen Ventilen mit mehreren Umfangsnuten", Olhydraulik und Pneumatik, Vol.34, pp.269-274, 1990.
  14. 박태조, 이정오, "그루브를 한 유압 피스톤펌프의 피스톤에 작용하는 측력의 해석", 한국윤활학회지, Vol.8, No.8, pp.44-49, 1992.
  15. Sasaki, A. and Yamamoto, T., "Review of Studies of Hydraulic Lock", Lubrication Engineering, Vol.49, pp.585-593, 1993.
  16. Park, T. J. and Lee, C. O., "Hydrodynamic Lateral Force on a Tapered Piston Subjected to a Large Pressure Gradient", Proc. of 3rd ICFP, pp.44-48, 1993.
  17. 이정오, 박태조, 피스톤 형상이 유압피스톤 펌프.모터의 윤활특성에 미치는 영향, 한국윤활학회지, Vol.10, No.3, pp.47-53, 1994.
  18. Borghi, M., Cantore, G., Milani, M. and Paoluzzi, R., "Numerical Analysis of the Lateral Forces Acting on Spools of Hydraulic Components", Proc. of ASME, Int. Mech. Eng. Congress and Expo., Vol.5, pp.149-156, 1998.
  19. Milani, M., "Designing Hydraulic Locking Balancing Grooves", Proc. of Instn. Mech. Engrs., J. of Systems and Control Eng., Vol.215, pp.453-465, 2001.
  20. Belforte, G., Raparelli, T., Mazza, L. and Trivella, A., "Analysis, Design, and Comparison of Different Types of Pistons for Sealless Pneumatic Cylinders and Valves", Tribology Trans., Vol.48, No.3, pp.377-388, 2005. https://doi.org/10.1080/05698190591008577
  21. Borghi, M., "Hydraulic Locking-in Spool- Type Valves : Tapered Clearances Analysis", Proc. of Instn. Mech. Engrs., J. of Systems and Control Eng., Vol.215, pp.157-168, 2001.
  22. 박태조, "압력에 따른 점도변화가 그루브를 한 유압 스푸울 밸브에 미치는 영향", 한국윤활학회지, Vol.22, No.6, pp.307-313, 2006.
  23. FLUENT, FLUENT 6.0 Manual, 2002.
  24. Moffatt, H. K., "Viscous and Resistive Eddies near a Sharp Corner", J. Fluid Mech., Vol.18, pp.1-18, 1964. https://doi.org/10.1017/S0022112064000015
  25. Cheng, M. and Hung, K. C., "Vortex Structure of Steady Flow in a Rectangular Cavity", Computers and Fluids, Vol.35, No.10, pp.1046-1062, 2006. https://doi.org/10.1016/j.compfluid.2005.08.006
  26. Brizmer, V., Kligerman, Y. and Etsion, I., "A Laser Surface Textured Parallel Thrust Bearing", Tribology Trans., Vol.46, pp.397-403, 2003. https://doi.org/10.1080/10402000308982643
  27. Etsion, I., "State of the Art in Laser Surface Texturing", J. of Tribology, Vol.127, pp.248-253, 2005. https://doi.org/10.1115/1.1828070
  28. Feldman, Y., Kligerman, Y., Etsion, I. and Haber, S., "The Validity of the Reynolds Equation in Modeling Hydrostatic Effects in Gas Lubricated Textured Parallel Surfaces," J. of Tribology, Vol. 128, pp. 250-345, 2006.
  29. 박태조, 황윤건, "Laser Texturing한 평행 스러스트 베어링의 윤활특성 : 제1보 - 딤플 깊이의 영향", 한국 윤활학회지, Vol.25, No.5, pp305-310, 2009.
  30. 박태조, 황윤건, "Laser Texturing한 평행 스러스트 베어링의 윤활특성 : 제2보 - 딤플 위치의 영향", 한국윤활학회지, Vol.26, No.1, pp.1-6, 2010.
  31. 박태조, "Laser Texturing한 평행 스러스트 베어링의 윤활특성 : 제3보 - 딤플 수의 영향", 한국 윤활학회지, Vol.27, No.6, pp.302-307, 2011. https://doi.org/10.9725/kstle.2011.27.6.302
  32. 박태조, "Laser Texturing한 평행 스러스트 베어링의 윤활특성 : 제4보 - 딤플 형상의 영향", 한국윤활학회지, Vol.27, No.6, pp.338-343, 2011. https://doi.org/10.9725/kstle.2011.27.6.338
  33. 이준오, 박태조, "표면조직 가공한 유압부품면에서의 윤활특성", 유공압건설기계학회 논문집, Vol.9, No.4, pp.26-31, 2012. https://doi.org/10.7839/ksfc.2012.9.4.026