CCHE2D모형을 이용한 보 상류에 퇴적된 토사의 배출 효과 분석 - 상주보와 구미보를 중심으로 -

Numerical Analysis of the Sediment Pass-Through from the Sangju Weir and the Gumi Weir by using CCHE2D

  • 이경수 (한국교통대학교 토목공학과) ;
  • 장창래 (한국교통대학교 토목공학과) ;
  • 손광익 (영남대학교 건설시스템공학과) ;
  • 황만하 (한국수자원공사 수자원연구원)
  • Lee, Kyung Su (Department of Civil Engineering, Korea National University of Transportation) ;
  • Jang, Chang-Lae (Department of Civil Engineering, Korea National University of Transportation) ;
  • Son, Kwang Ik (Department of Civil Engineering, Yeongnam University) ;
  • Hwang, Man Ha (Korea Institute for Water and Environment, Korea Water Resources Corporation)
  • 투고 : 2013.09.23
  • 심사 : 2013.11.25
  • 발행 : 2013.11.30

초록

In this study, sediment pass-through (SPT) from the Sangju Weir and Gumi Weir in the Nakdong River is analyzed numerically using CCHE2D. Sediment delivery is analyzed to predict the sediment discharge rate in the Sangju Weir and Gumi Weir. The sediment discharge from the Sanju Weir is 4,381 tons in the inflow of $3,857m^3/s$, which are 2 year frequency discharge, for 48 hours, and the sediment discharge is 2,766 tons in the inflow of $1,500m^3/s$. The maximum sediment delivery occurs in the immediate downstream of the weir. The sediment discharge from the Gumi Weir is 3,216 tons in the inflow of $5,400m^3/s$, which are 2 year frequency discharge, for 48 hours, and the sediment discharge is 73 tons in the inflow of $3,857m^3/s$. The maximum sediment delivery occurs in the weir. Therefore, the effectiveness of sediment delivery is high in the condition of the 2 year frequency discharge and the gate in the weirs fully are opened.

키워드

과제정보

연구 과제 주관 기관 : 국토교통부

참고문헌

  1. Ackers, P. and White, W. R. (1973). Sediment transport new approach and analysis, Journal of Hydraulic Engineering Division, American Society of Civil Engineers, 99(11), pp. 2041-2060.
  2. Chang, H. H., Harrison, H. H., Lee, W., and Tu, S. (1996). Numerical modeling for sediment-pass-through reservoirs, Journal of Hydraulic Engineering, American Society of Civil Engineers, 122(7), pp. 381-388. https://doi.org/10.1061/(ASCE)0733-9429(1996)122:7(381)
  3. Einstein, H. A. (1950). The Bed Load Function for Sediment Transportation in Open Channel Flows, United States Department of Agriculture Soil Conservation Service, Technical Bulletin No. 1026.
  4. Engelund, F. and Hansen, E. (1967). A monograph on sediment transport to alluvial streams, Copenhagen, Teknik Vorlag, Copehangen, Denmark.
  5. Garbrecht, J., Kuhnle, R., and Alonso, C. (1995). A sediment transport capacity formulation for application to large channel networks, Journal of Soil and Water Conservation, 50(5), pp. 527-529.
  6. Hasegawa, K. (1984). Hydraulic research on planimetric forms, bed topographies and flow in alluvial rivers, Ph. D. Dissertation, Hokkaido University, Sapporo, Japan. [Japanese Literature]
  7. Im, J. C. (2009). A Numerical Analysis for Flow and Bed Changes near the Opening Gate for Sediment Release at the Dam or Weir, Master's Thesis, Myongji University, Seoul, Korea, pp. 55-56. [Korean Literature]
  8. Jang. C. L., Jung, K. S., Kim, W. K., and Kim, J. H. (2004). Numerical Simulation for Bed Material Sorting in the Channel With Mixed Grain Sizes, Journal of Korean Water Resources Association Conference, Korean Water Resources Association, 37(5), pp. 387-395. [Korean Literature]
  9. Jang. C. L., Im, K. S., Hwang, M. H., and Kim, J. H. (2011). Technology of flushing sediment for Sedimentation Reduction in Reservoir, Journal of Korean Water Resources Association, 44(11), pp. 45-49. [Korean Literature]
  10. Jia, Y. and Wang, S. S. Y.(2001). CCHE2D : Two-dimensional Hydrodynamic and Sediment Transport Model For Unsteady Open Channel Flows Over Loose Bed, Technical Report No. NCCHE-TR-2001-1.
  11. Korea Water Resources Corporation (KWRC). (2011). A Study of Structural Measures Establishment for Non-structural Measures Establishment and River bed and Bank Protection on For Sediment Management (1st year), Korea Water Resources Corporation [Korean Literature]
  12. Liu, J., Minami, S., Otsuki, H., Liu, B., and Ashida, K. (2004). Prediction of concerted sediment flushing, Journal of Hydraulic Engineering, American Society of Civil Engineers, 130(11), pp. 1089-1096. https://doi.org/10.1061/(ASCE)0733-9429(2004)130:11(1089)
  13. Lee, K. S. (2012). Numerical Simulation of the Sediment Pass- Through from Dams by using CCHE2D, Master's Thesis, Chungju National University, Chungju-si, Chungbuk, Korea, pp. 66-70. [Korean Literature]
  14. Martin, J. T. and John, I. R. (2001). Lake sharpe sediment flushing analyses, World Water Congress 2001.
  15. Ministry of Land, Transport and Maritime Affairs (MLTM). (1993). River Master Plan on NakDong Basin, Ministry of Land, Transport and Maritime Affairs. [Korean Literature]
  16. Ministry of Land, Transport and Maritime Affairs (MLTM). (2002). Annual Hydrological Report on Korea, NakDong River Flood Contril Office. [Korean Literature]
  17. Ministry of Land, Transport and Maritime Affairs (MLTM). (2007). Annual Hydrological Report on Korea, NakDong River Flood Contril Office. [Korean Literature]
  18. Ministry of Land, Transport and Maritime Affairs (MLTM). (2009). River Master Plan on NakDong Basin(Change), Ministry of Land, Transport and Maritime Affairs. [Korean Literature]
  19. Negm, M. A., Abdulaziz, T., Nassar, M., and Fathy, I. (2010). Predication of Life Time Span of High Aswan Dam Reservior Using CCHE2D Simulation Model, Preceeding 14th International Water Technology Conference, pp. 611-626.
  20. Wu, W., Wang, S.S.Y. and Jia, Y.(2000). "Nonuniform Sediment Transport in Alluvial Rivers." Journal of the Hydraulic Research, IAHR, 38(6). pp. 427-434. https://doi.org/10.1080/00221680009498296
  21. Wu, W. (2001). CCHE2D Sediment Transport Model Version 2.1, Technical Report No. NCCHE-TR-2001-3
  22. Zeng, W., and Beck, M. B. (2003). "STAND, a Dynamic Model for Sediment Transport and Water Quality," Journal of Hydrology, Elservier, 277, pp. 125-133. https://doi.org/10.1016/S0022-1694(03)00073-8