조명전기설비학회논문지 (Journal of the Korean Institute of Illuminating and Electrical Installation Engineers)

  • 제27권2호
  • /
  • Pages.102-109
  • /
  • 2013
  • /
  • 1229-4691(pISSN)
  • /
  • 2287-5034(eISSN)
한국조명전기설비학회 (The Korean Institute of IIIuminating and Electrical Installation Engineers)
권호 표지
DOI QR코드

DOI QR Code

토크예측제어를 이용한 매입형 영구자석 동기전동기의 토크리플저감기법

Torque Ripple Reduction of Interior Permanent-Magnet Synchronous Motors Driven by Torque Predictive Control

  • 김현섭 (서울과학기술대학교 철도전문대학원) ;
  • 한정호 (서울과학기술대학교 철도전문대학원) ;
  • 송중호 (서울과학기술대학교 전기정보공학과)
  • Kim, Hyunseob (Dept. of Railway Electrical and Signaling Engineering, Seoul National University of Science and Technology) ;
  • Han, Jungho (Dept. of Railway Electrical and Signaling Engineering, Seoul National University of Science and Technology) ;
  • Song, Joong-Ho (Dept. of Electrical and Information Engineering, Seoul National University of Science and Technology)
  • 투고 : 2013.01.07
  • 심사 : 2013.01.28
  • 발행 : 2013.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, a new torque predictive control method of interior permanent magnet synchronous motor is developed based on an extended rotor flux. Also, a duty ratio prediction method is proposed and allows the duty ratio of the active stator voltage vector to be continuously calculated. The proposed method makes it possible to relatively reduce the torque ripple under the steady state as well as to remain the good dynamic response in the transient state. With the duty ratio prediction method, the magnitude and time interval of the active stator voltage vector applied can be continuously controlled against the varying operation conditions. This paper shows a comparative study among the switching table direct torque control(DTC), the SVM-DTC, conventional torque predictive control, and the proposed torque predictive control. Simulation results show validity and effectiveness of this work.

키워드

참고문헌

  1. M.N. Uddin, T.S. Radwan, G.H. George and M.A. Rahman , Performance of current controllers for VSI-fed IPMSM drive, IEEE Transactions on Industry Applications, Vol 36, pp.1531-1538, 2000. https://doi.org/10.1109/28.887203
  2. L. Zhong, M. F. Rahman, W. Y. Hu, and K. W. Lim, ,Analysis of direct torque control in permanent magnet synchronous motor drives, IEEE Transactions on Power Electronics, vol. 12, pp. 528-536, 1997. https://doi.org/10.1109/63.575680
  3. L. Tang, L. Zhong, and M. F. Rahman, A novel direct torque control for interior permanent-magnet synchronous machine drive with low ripple in torque and flux-a speed-sensorless approach, IEEE Transactions on Industry Applications, vol. 39, pp. 1748-1756, 2003. https://doi.org/10.1109/TIA.2003.818981
  4. B. Singh and D. Goyal, Improved DSVM-DTC based current sensorless permanent magnet synchronous motor drive, in Proc. PEDS, pp. 1354-1360, 2007.
  5. Yen-Shin Lai, A New Approach to Direct Torque Control Of Induction Motor Drives for Constant switching Frequency and Torque Ripple Reduction, IEEE Transactions on Industry Applications, vol. 16, pp. 220-221, 2001.
  6. H. Zhu, X. Xiao, and L. Yongdong, Torque ripple reduction of the torque predictive control scheme for permanent-magnet synchronous motors, IEEE Transactions on Industry Applications, vol. 59, pp. 871-877, 2012.
  7. Y. Li, C. Wang, and H. Hu, "Predictive control of torque and flux of induction motor drives," in Proc. PEDS, pp. 67-71, 2005.
  8. M. Zhang, X. Xiao, and Y. Li, Predictive direct torque control of PM synchronous motors based on an area voltage vector table, J. Tsinghua Univ., vol. 48, no. 1, pp. 25-30, Jan. 2008.
  9. Y. Zhang and J. Zhu, Direct torque control of permanent magnet synchronous motor with reduced torque ripple and commutation frequency, IEEE Transactions on Power Electronics., vol. 26, no. 1, pp. 235-248, 2011. https://doi.org/10.1109/TPEL.2010.2059047