참고문헌
- J. H. Lee, T. J. Ko, D. G. Baek, "A Study on Machinability and Cost Evaluation of MQL Milling Process," Journal of the Korean Society for Precision Engineering, Vol. 26, No. 2, pp. 26-34, 2009.
- Y. K. Hwang, W. J. Chung, J. Y. Jung, C.M. Lee, " A Study on the Improvement of Cutting Force and Surface Roughness in MQL Turning," Transactions of the Korean Society of Machine Tool Engineers, Vol. 15, No. 4, pp. 83-91, 2006.
- S. H. Park, J. Y. Jung, C. M. Lee, "A Study on the Improvement of Surface Roughness and Analysis of Cutting Force in MQL End-milling," Proc. of KSPE Fall Conference, pp. 395-396, 2006.
- M. Rahman, A. Senthil Kumar, M.U. Salam, "Experimental evaluation on the effect of minimal quantities of lubricant in milling," International Journal of Machine Tools & Manufacture, Vol. 42, pp. 539-547, 2002. https://doi.org/10.1016/S0890-6955(01)00160-2
- Anselmo Eduardo Diniz, Ricard Micaroni, "Cutting conditions for finish turing process aiming: the use of dry cutting," International Journal of Machine Tools & Manufacture, Vol. 42, pp. 899-904, 2002. https://doi.org/10.1016/S0890-6955(02)00028-7
- M. Y. Yan, "Optimization of Cutting Tool for High Speed Machining," The Korean Society of Mechanical Engineering, Vol. 12, No. 6, pp. 1290-1295, 1988.
- T. L. Schmitz, M. A. Davies, K. Medicus, J. Snyder, "Improving High-speed Machining Material Removal Rates by Rapid Dynamic Analysis," Annals CIRP, Vol. 50, Issue. 1, pp. 263-268, 2001. https://doi.org/10.1016/S0007-8506(07)62119-2
- K. J. Lee, M. A. Donmez, M. Y. Yang, H. K. Jang"Study on Improvement of Accuracy for Evaluation of Chatter Stability in High-Seep Machining," Proc. of KSPE Spring Conference, pp. 99-100, 2009.
피인용 문헌
- Efficient MQL-based Drilling of Inconel 601 vol.17, pp.4, 2018, https://doi.org/10.14775/ksmpe.2018.17.4.001
- MQL드릴링 가공에서 밀폐커버와 타입 절삭유의 효과 vol.15, pp.6, 2013, https://doi.org/10.14775/ksmpe.2016.15.6.077
- MQL 공급시스템을 이용한 플라스틱 금형강 가공 최적화에 관한 연구 vol.16, pp.6, 2013, https://doi.org/10.14775/ksmpe.2017.16.6.007