Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

Structural Analysis on Flange Coupling due to Change of Bolt Numbers

볼트 수 변경에 따른 플랜지 커플링에 대한 구조해석

  • Han, Moonsik (Keimyung University Mechanical and Automotive Engineering Dept.) ;
  • Cho, Jaeung (Kongju National University Mechanical Engineering Dept.)
  • Published : 2013.10.31
⟨ Previous Next ⟩

Abstract

This study investigates structural and vibration analyses due to the change of bolt Numbers on models 1 and 2 of flange couplings connected with both sides of axis. As maximum equivalent stresses of models 1 and 2 are 122.05 and 102.3 MPa respectively by the basis of bolt, these stresses are within the allowable stress of this model and the safety of bolt design is verified. As maximum equivalent stresses of models 1 and 2 are 196.2 and 196.4 MPa respectively by the basis of body, these stresses are within the allowable stress of this model and the safety of body design is verified. Through natural frequency analysis, maximum displacements of model 1 and 2 are shown at the frequencies of 6565.1 and 6614.9 Hz respectively. Maximum displacements in cases of models 1 and 2 are shown at harmonic frequencies of 7760 and 7840 Hz at real loading conditions. By putting these study results together, the durability of vibration at model 2 with bolt numbers of 8 becomes better than model 1 with bolt numbers of 6. These study results can be effectively utilized with the design on flange coupling by anticipating and investigating prevention and durability against its damage.

Keywords

References

  1. Cho, Y. T., Lee, K. Y., Lee, C. H., 2010, "Development of Flange Flexible Urethane-key Coupling", Korean Journal of Machine Tools Vol.19 No.5, pp. 667-671
  2. Swanson, J., "Ansys 11.0, Ansys Inc.," U.S.A., 2008.
  3. Ko, J. Y. 2009, "ANSYS and Finite Element Method", Sigma Press, pp. 123-153.
  4. Tae-Sung FEA Division, 2008.05.30, "ANSYS WORKBENCH WANGCHOBO to escape", Sigma Press, pp. 131-145.
  5. Lee. C. H., 2006, "ANSYS First Step", SeonHak Publishers, pp. 115-132.
  6. Kim, K. J., Jung, M. R., Kim, Y. T., Baek, K. Y. and Lee, J. H., 2008, "Inelastic Nonlinear Analysis of Arch Truss and Space Truss Structures", Journal of the Korean Association for Spatial Structures , Vol. 8, No. 5, pp. 47-58.
  7. Yoon, S. W. and Park, Y., 2009, "Comparison of Natural Frequency of Domestic and Foreign Long-spaned Structure ", Journal of the Korean association for shell and spatial structures, Vol. 9 No. 3, pp. 79-85.
  8. Cho, J. U. and Han, M. S., 2013, "Structural strength analysis according to the configuration of speaker placer with wall hanger type ", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 1, pp. 1-8. https://doi.org/10.14775/ksmpe.2013.12.6.001