한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제12권5호
  • /
  • Pages.36-41
  • /
  • 2013
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지

퀼축강성 변화가 측면 연삭가공에 미치는 영향

The Effects on a Side-Cut Grinding depend on the Change of the Quill Rigidity

  • Choi, Hwan (Dept. of Mechanical Design Engineering, Kumoh National Institute of Technology) ;
  • Kim, Chang-Su (CNI Technology) ;
  • Park, Won-Kyue (Dept. of Automotive Engineering, Gyeonggi College of Science and Technology) ;
  • Lee, Choong-Seok (Dept. of Mechanical Design Engineering, Kumoh National Institute of Technology)
  • 발행 : 2013.10.31
⟨ 이전 논문 다음 논문 ⟩

초록

One of the problems in grinding process using a machining center(MC) with a small diametric wheels is machining error due to decrease of the quill diameter. In this study, side-cut grinding is performed with a vitrified bonded CBN wheel on the machining center. Grinding experiments are performed at various grinding conditions including quill length, quill diameter and depth of cut. The effect on the grinding force, machining error and surface roughness due to the change of the quill rigidity are investigated experimentally. The slenderness ratio of the quill is significant factor to analyse the change of the grinding force and machining error.

키워드

참고문헌

  1. Antonini, G., "Applying Machining Center Technology to Grinding," Modern Machine Shop, Vol. 66, No. 7, pp. 70, 1993.
  2. Nakagawa, H., Hirogaki, T., Iwasaki, Y., Hayashi, T., Kita, Y. and Kakino, Y., "Study on Oscillation Grinding by Numerical Control with a Machining Center," Journal of the Japan Society of Precision Engineering, Vol. 68, No. 7, pp. 923-927, 2002. https://doi.org/10.2493/jjspe.68.923
  3. Rausch, S., Odendahl, S., Kersting, P., Biermann, D. and Zabel, A., "Simulation-Based Prediction of Process Forces for Grinding Free-Formed Surfaces on Machining Centers," Procedia CIRP, Vol. 4, pp. 161-165, 2012. https://doi.org/10.1016/j.procir.2012.10.029
  4. Rausch, S. and Biermann, D., "Grinding of Hard-Material-Coated Forming Tools on Machining Centers," Procedia CIRP, Vol. 1, pp. 388-392, 2012. https://doi.org/10.1016/j.procir.2012.04.069
  5. Lee, C. S., Kim, C. S., Park, W. K., Lee, J. C. and Choi, H., " Study on the Side-Cut Grinding using the CBN Wheels," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 98-103, 2012.
  6. Lee, C. S., Chae, S. S., Kim, T. S., Lee, S. M., Park, H. K. and Lee, J. C., "A Study on the Grinding Characteristics for Various Grinding Wheels in the Cylindrical Grinding," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 7, No. 1, pp. 3-8, 2008.