References
- W. S. Winston Ho and K. K. Sirkar, "Membrane Handbook", Chapman and Hall Pub., USA (1992).
- J. E. Cadotte, "Reverse osmosis membrane", U. S. Patent, 4,259,183 (1981).
- I. S. Kim and B. S. Oh, "Technologies of seawater desalination and wastewater reuse for saving water shortage", J. of KSEE, 30, 12 (2008).
- Y. T. Lee and N. W. Kim, "Reverse osmosis membrane with high salt rejection for seawater desalination.", J. Korean Ind. Eng. Chem., 15(4), 466 (2004).
- R. Singh, "Characteristics of a chlorine-resistant reverse osmosis membrane", Desalination, 95, 27 (1994). https://doi.org/10.1016/0011-9164(94)00004-2
- R. Singh and Rajindar, "Polyamide polymer solution behavior nder chlorination conditions", J. Membr. Sci., 88, 285 (1994). https://doi.org/10.1016/0376-7388(94)87015-2
- N. W. Kim and S. S. Kim, "The Characteristics of seawater RO membrane for high recovery system", Membrane Journal, 12, 3 (2002).
- J. A. M. H. Hofman, E. F. Beerendonk, H. C. Folmer, and J. C. Kruithof, "Removal of pesticides and other micropollutants with cellulose acetate, polyamide and ultra-low pressure reverse osmosis membranes", Desalination, 113 (1997).
- M. K. Silva, A. Ambrosi, G. M. Ramos, and I. C. Tessaro, "Rejuvenating polyamide reverse osmosis membranes by tannic acid treatment", Separation and Purification Tech., 100 (2012).
- S. H. Jang, "Organic-Inorganic hybrid materials : Sol-Gel derived coatings", Polymer Sci. Tech., 12(5), (2001).
- M. Kurihara, T. Uemura, Y. Himeshima, K. Ueno, and R. Bairinji, "Development of crosslinked aromatic polyamide composite reverse osmosis membrane", J. Chem. Soc. Jpn., 2, 97 (1994).
- R. Singh, "Characteristics of a chlorine-resistant reverse osmosis membrane", Desalination, 95, 27 (1994). https://doi.org/10.1016/0011-9164(94)00004-2
- Julius Glater, Seung-Kwan Hong, and Menachem Elimelech, "The search for a chlorine-resistant reverse osmosis membrane", Desalination, 95, 325 (1994). https://doi.org/10.1016/0011-9164(94)00068-9
- Y. G. Kim, N. W. Kim, and Y. T. Lee, "A study on chlorine resistance improvement of reverse osmosis membrane by surface modification", Membrane Journal, 15(4), 320 (2005).
- X. Zhu and M. Elimelech, "Colloidal fouling of reverse osmosis membranes : measurements and fouling mechanisms", Environmental Sci. & Tec., 31(12) (1997).
- Y. G. Park and Y. M. Lee, "Membrane Foulling in the Membrane Process", Membrane Journal, 1(6), 1 (1996).
- S. Belfer, Y. Purinson, R. Fainshtein, Y. Radchenko, and O. Kedem, "Surface modification of commercial composite polyamide reverse osmosis membranes", J. Memb. Sci., 139, 175 (1998). https://doi.org/10.1016/S0376-7388(97)00248-2
- M. Kurihara, T. Uemura, Y. Himeshima, K. Ueno, and R. Bairinji, "Development of crosslinked aromatic polyamide composite reverse osmosis membrane", J. Chem. Soc. Jpn., 2, 97 (1994).
- K. P. Lee, T. C. Arcnot, and D. Mattia, "A review of reverse osmosis membrane materials for desalination- development to date and future potential", J. Memb. Sci., 370 (2011).
- V. Freger, J. Gilron, and S. Belfer, "TFC polyamide membranes modified by grafting of hydrophilic polymers: an FT-IR/AFM/TEM study", J. Mem. Sci., 209 (2002).
- O. Drzyzga, "Diphenylamine and derivatives in the environment : a review", Chemosphere, 53, 809 (2003). https://doi.org/10.1016/S0045-6535(03)00613-1
- S. F. E. Boerlage, M. D. Kennedy, M. R. Dickson, D. E. Y. El-Hodali, and J. C. Schippers, "The modified fouling index using ultrafiltration membranes (MFI-UF): characterisation, filtration mechanisms and proposed reference membrane", J. Mem. Sci., 197 (2002).
- N. W. Kim, "Preparation and characteristics of fouling resistant Nanofiltration membranes", Membrane Journal, 17(1), (2007).
- M. Hirose, H. Ito, and Y. Kamiyama, "Effect of skin layer surface structures on the flux behaviour of RO membranes", J. Memb. Sci. 121, 209 (1996). https://doi.org/10.1016/S0376-7388(96)00181-0
- T. Silk, Q. Hong, J. Tamm, and R. G. Compton, "AFM studies of polypyrrole film surface morphology I. The influence of film thickness and dopant nature", Synthetic Metals, 93, 59 (1998). https://doi.org/10.1016/S0379-6779(98)80131-8
- Y. I. Rabinovich, J. J. Adler, A. Ata, R. K. Singh, and B. M. Moudgil, "Adhesion between nanoscale rough surfaces I. role of asperity geometry", J. of Colloid and Interface Sci., 232, 10 (2006).
- A. Bhattacharya, B. N. Misra, "Grafting: a versa tile means to modify polymers techniques, factors and applications", Prog. Polymer Sci., 29. 767 (2004). https://doi.org/10.1016/j.progpolymsci.2004.05.002
- V. B. Wiertz and P. Bertrand, "Identification of the N-containing functionalities introduced at the surface of ammonia plasma treated carbon fibres by combined TOF SIMS and XPS", Univ. Louvain 1348 Editor, Louvain.
- T. C. Wen, J. B. Chen, and A. Gopalan, "Soluble and methane sulfonic acid doped poly(diphenylamine)- synthesis and characterization", Materials Letters, 57, 280 (2002). https://doi.org/10.1016/S0167-577X(02)00779-6
- S. N. Kumar, G. Bouyssoux, and F. Gaillard "Electronic and structural characterization of electrochemically synthesized conducting polyaniline from XPS studies", Surf. Interface Anal., 15, 531 (1990). https://doi.org/10.1002/sia.740150906
- M. L. Lind, D. E. Suk, V. Nguyen, and E. M. V. Hoek, "Tailoring the Structure of Thin Film Nanocomposite Membranes to Achieve Seawater RO Membrane Performance", Environ. Sci. Technol., 44, 8230 (2010). https://doi.org/10.1021/es101569p
- Q. Li, X. Pan, Z. Qu, X. Zhao, Y. Jin, H. Dai, B. Yang, and X. Wang, "Understanding the dependence of contact angles of commercially RO membranes on external conditions and surface features", Desalination, 309, 38 (2013). https://doi.org/10.1016/j.desal.2012.09.007