DOI QR코드

DOI QR Code

Fluid-Structure Interaction Study on Diffuser Pump With a Two-Way Coupling Method

  • Xu, Huan (Research Center of Fluid Machinery Engineering and Technology, Jiangsu University) ;
  • Liu, Houlin (Research Center of Fluid Machinery Engineering and Technology, Jiangsu University) ;
  • Tan, Minggao (Research Center of Fluid Machinery Engineering and Technology, Jiangsu University) ;
  • Cui, Jianbao (Research Center of Fluid Machinery Engineering and Technology, Jiangsu University)
  • Received : 2012.07.06
  • Accepted : 2013.02.28
  • Published : 2013.06.30

Abstract

In order to study the effect of the fluid-structure interaction (FSI) on the simulation results, the external characteristics and internal flow features of a diffuser pump were analyzed with a two-way flow solid coupling method. And the static and dynamic structure analysis of the blade was also caculated with the FEA method. The steady flow field is based on Reynolds Averaged N-S equations with standard $k-{\varepsilon}$ turbulent model, the unsteady flow field is based on the large eddy simulation, and the structure response is based on elastic transient structural dynamic equation. The results showed that the effect of FSI on the head prediction based on CFD really exists. At the same radius, the van mises stress on the nodes closed shroud and hub was larger than other nodes. A large deformation region existed near inlet side at the middle of blades. The strength of impeller satisfied the strength requirement with static stress analysis based on the fourth strength theory. The dynamic stress varied periodically with the impeller rotating. It was also found that the fundamental frequency of the dynamic stress is the rotating frequency and its harmonic frequency. The frequency of maximum stress amplitude at node 1626 was 7 times of the rotating frequency. The frequency of maximum stress amplitude at node 2328 was 14 times of the rotating frequency. No matter strength failure or fatigue failure, the root of blades near shroud is the key region to analyse.

Keywords

References

  1. Xiao Ruofu, Wang Zhengwei, Luo Yongyao, "Dynamic Stresses in a Francis Turbine Runner Based on Fluid-Structure Interaction Analysis[J]," Tsinghua Science and Technology, 2008, 13(5): 587-592. https://doi.org/10.1016/S1007-0214(08)70093-2
  2. Guerri O., Hamdouni A., Sakout A., "Fluid structure interaction of wind turbine airfoils[J]," Wind Engineering, 2008, 32(6): 539-557. https://doi.org/10.1260/030952408787548875
  3. Young Y L, Motley M R, Yeung R W, "Three-Dimensional Numerical Modeling of the Transient Fluid-Structural Interaction Response of Tidal Turbines[J]," Journal of Offshore Mechanics and Arctic Engineering, 2010, 132(1): 1-12.
  4. Kato C., Yamade Y., Wang Hong, et al, "Prediction of the noise from a multi-stage centrifugal pump [C]," ASME Fluids Engineering Division Summer Meeting , 2005.
  5. Friedrich-Karl B., Hans J. D., "Comparison of Pump Impeller Orbit Curves Obtained by Measurement and FSI Simulation[C]," Proceedings of the 2007 ASME Pressure Vessels and Piping Conference, July 22-26, 2007, San Antonio, TX, United states.
  6. Wang Yang, Wang Hongyu, Xu Xiaomin, et al, "Finite element computation for impeller of stamping and welding centrifugal pump[J]," Journal of Drainage and Irrigation Machinery Engineering, 2011, 29(2): 109-113.
  7. Pei Ji, Yuan Shouqi, Yuan Jianping, "Numerical calculation for effect of fluid-structure interaction on flow field in centrifugal pump[J]," Transactions of the Chinese Society for Agricultural Machinery, 2009, 40(12): 107-112.
  8. Rikke K. B., Christian B. J., Nicholas Pedersen, "Flow in a Centrifugal Pump Impeller at Design and Off-Design Conditions—Part II: Large Eddy Simulations[J]," Journal of Fluids Engineering, 2003, 125: 73-83. https://doi.org/10.1115/1.1524586

Cited by

  1. Fully coupled FSI analysis of Francis turbines exposed to sediment erosion vol.7, pp.3, 2014, https://doi.org/10.5293/IJFMS.2014.7.3.101