소성∙가공 (Transactions of Materials Processing)

  • 제22권1호
  • /
  • Pages.42-47
  • /
  • 2013
  • /
  • 1225-696X(pISSN)
  • /
  • 2287-6359(eISSN)
한국소성∙가공학회 (The Korean Society for Technology of Plasticity and materials processing)
권호 표지
DOI QR코드

DOI QR Code

대중교통 연계를 고려한 도심형 접이식 자전거 개발

Development of an Urban Folding Bike for Public Transportation

  • Jung, T.S. (Department of Mechanical Design Inha Technical College)
  • 투고 : 2012.12.18
  • 심사 : 2013.01.09
  • 발행 : 2013.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The bicycle is one of the most important eco-friendly transport methods which can mitigate global warming. The portability of a bike on public transportation systems is essential for the wide spread use of bicycles by people in urban environments. In this study, a lightweight urban folding bike was developed with careful consideration of the association with public transport. A folding frame using a moving slide link mechanism made from AL6061 is proposed. Numerical analysis was conducted to evaluate structural safety of the bike in both vertical and pedal loading tests. The proposed urban folding bicycle weights only 10kg and summation of its width, length, and height in the folded configuration is under 158cm.

키워드

참고문헌

  1. P. Lee, I. H. Whang, J. H. Woo, S. W. Park, D. K. Oh, G. B. Lee, 2011, Development of Product Management System for Higher-Value-Added Bicycle, Trans. Kor. Soc. Mech. Eng. A., Vol. 35, pp. 467-477. https://doi.org/10.3795/KSME-A.2011.35.5.469
  2. W. R. Bae, D. W. Shin, B. K. Shim, B. N. Kim, S. I. Shin, Y. K. Kwon, 2010, Proc. Kor. Soc. Precis. Eng. Spring Conf.(editor: E. S. Lee), Kor. Soc. Precis. Eng., Seoul, Korea, pp. 853-854.
  3. B. S. Lee, 2003, Design and Manufacture of CFRP for Bicycle Frame, J. Kor. Soc. Precis. Eng., Vol. 20, No. 6, pp. 130-137.
  4. H. J. Choi, S. J. Lim, Y. Y. Ok, K. H. Oh, 2011, Proc. Kor. Soc. Precis. Eng. Spring Conf.(editor: H. Z. Choi), Kor. Soc. Precis. Eng., Seoul, Korea, pp. 1271-1272.
  5. Y. S. Lee, K. H. Shin, S. K. Cheong, Y. J. Choi, Y. K. Kim, K. R. Park, H. S. Kim, 2012, Kor. Soc. Mech. Eng. Production and Design Div. Spring Conf.(editor: T. J. Ko), Kor. Soc. Mech. Eng., Seoul, Korea, pp. 163-164.
  6. Korean Agency for Technology and Standards, 2013, Product Safety Portal, http://www.safetykorea.kr.
  7. M. J. Song, S. Y. Jung, B. C. Hwang, C. Kim, 2010, A Study on Structure Analysis and Fatigue Life of the Common Rail Pipe, Trans. Mater. Process., Vol. 19, No. 2, pp. 88-94. https://doi.org/10.5228/KSPP.2010.19.2.088

피인용 문헌

  1. Optimization of pivot obliquity for a foldable bicycle vol.17, pp.7, 2016, https://doi.org/10.1007/s12541-016-0113-x