한국주조공학회지 (Journal of Korea Foundry Society)

  • 제33권5호
  • /
  • Pages.204-209
  • /
  • 2013
  • /
  • 1598-706X(pISSN)
  • /
  • 2288-8381(eISSN)
한국주조공학회 (Korea Foundry Society)
권호 표지
DOI QR코드

DOI QR Code

유동 및 응고 시뮬레이션을 활용한 회전자 패밀리 금형의 오버플로우 설계 방안

Overflow Design Methods of Family Mold for Rotor Using the Flow and Solidification Simulation

  • Jung, J.M. (School of Materials Science & Engineering, Chonnam National Univ.) ;
  • Kim, C.W. (School of Materials Science & Engineering, Chonnam National Univ.) ;
  • Nguyen, V.T. (School of Materials Science & Engineering, Chonnam National Univ.) ;
  • Lee, K.M. (School of Materials Science & Engineering, Chonnam National Univ.) ;
  • Kuk, J.M. (Bostech Co., Ltd.) ;
  • Jin, H.G. (Bostech Co., Ltd.) ;
  • Hong, S.K. (School of Materials Science & Engineering, Chonnam National Univ.)
  • 투고 : 2013.08.23
  • 심사 : 2013.10.17
  • 발행 : 2013.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The family mold casting have advantages which are able to make products with different shapes and dimensions simultaneously in a single mold. In this study, the design of the 4 cavity rotor family mold was used by "Anycasting" software, the defects occurred during die casting were predicted and suggested the best optimization conditions for sound products. The result of the experiment were that the optimum overflow design was needed for gas emission and control of residual oxides. It was clear that the defects positions formed by diecasting were agreed with nearly them predicted by simulation.

키워드

참고문헌

  1. LEE JH, Journal of the Korean Society of Precision Engineering, "Detectibility of Internal Defects in Aluminum Die-casted Rotor Using Ultrasonic Technique", 18 (2001) 185-191.
  2. Lee YC, KAIS "Development of Auto Casting Machine for Rotor Molding of Electric Motor" (2010) 824-827.
  3. Kim YC, J.KFS, "Optimization of the Thin-walled Aluminum Die Casting Die Design by Solidification Simulation", 28 (2008) 190-194.
  4. ZHANG Weishan, XIONG Shoumei and LIU Baicheng, Journal of Materials Processing Technology, "Study on a CADICAE System of Die Casting", 63 (1997) 707-711. https://doi.org/10.1016/S0924-0136(96)02711-2
  5. Dennis L. Fritz:Die Casting Engineer, "CAD/CAE: Fantasy or Fact", 30 (1986) 34-35.
  6. Jack R. Vann and Ying Shen, Die Casting Engineer, "Computer-Integrated Information/Control Systems for Improved Quality and Profits(Part 1)", 32 (1988) I8-26.
  7. Jack R. Vann and Ying Shen, Die Casting Engineer, "Computer-Integrated Information/Control Systems for Improved Quality and Profits(Part2)", 32 (1988) 36-46.
  8. J. Szekely and A. S. Jassal, Metall. Trans, 9B (1978) 389.
  9. J. Cambell, Mat. Sci. &tech, 17 (1991) 885.