DOI QR코드

DOI QR Code

염기성 올리고펩티드 유도체를 가진 고분자 리피드의 합성 및 유전자 전달 효과 연구

Synthesis of Polymerizable Amphiphiles with Basic Oligopeptides for Gene Delivery Application

  • 배선주 (충남대학교 자연과학대학 생화학과) ;
  • 최혜 (충남대학교 자연과학대학 생화학과) ;
  • 최준식 (충남대학교 자연과학대학 생화학과)
  • Bae, Seon Joo (Department of Biochemistry, Chungnam National University) ;
  • Choi, Hye (Department of Biochemistry, Chungnam National University) ;
  • Choi, Joon Sig (Department of Biochemistry, Chungnam National University)
  • 투고 : 2012.08.29
  • 심사 : 2012.09.28
  • 발행 : 2013.01.25

초록

폴리디아세틸렌(polydiacetylene, PDA)은 자기조립된 디아세틸렌(diacetylene) 단량체의 광중합에 의해 만들어진다. 디아세틸렌 단량체들이 조직적으로 배열되면 254 nm의 자외선 노광에 의해 1,4-첨가 중합이 일어나 고분자 주사슬에 이중결합과 삼중결합이 교대로 존재하는 폴리디아세틸렌이 만들어진다. 폴리디아세틸렌 수용액은 일반적으로 약 640 nm에서 최대흡수파장을 지니는 청색을 띠게 되며 여기에 온도나 pH의 변화, 다른 물질의 결합 등 외부 자극에 의해 약 550 nm의 최대 흡수 파장을 띠는 적색으로 색 전이가 일어나게 된다. 본 연구에서, 우리는 고체상 펩티드 합성을 이용하여 PCDA(10,12-pentacosadyinoic acid) 리포좀의 표면에 양이온성 올리고펩티드를 도입하였다. 또한 다양한 몰 비율로 리포좀 수용액을 제조하여 동물 세포에 트랜스펙션한 결과, 향상된 유전자 전달 효율과 낮은 독성을 보이는 것을 확인하였고, PCDA의 특성을 이용하여 세포에 처리 후 세포 관련 비표지 형광을 관찰하였다.

Polydiacetylene (PDA) is made by photopolymerization of self-assembled diacetylene monomers. If diacetylene monomers are arranged systematically and close enough with distance of atoms, 1,4-addition polymerization will occur by the irradiation of 254 nm ultraviolet rays and then PDA will have alternated ene-yne polymer chains at the main structure. Aqueous solutions of diffused PDA is tinged with blue which shows ${\lambda}_{max}$ 640 nm. Visible color changes from blue to red occurs in response to a variety of environmental perturbations, such as temperature, pH, and ligand-receptor interactions. In this study, we synthesized cationic peptides - PCDA(10,12-pentacosadyinoic acid) liposome using a solid phase peptide synthesis (SPPS) method and prepared liposome solutions at various molar ratios using MPEG-PCDA. When mammalian cells were treated with the liposomes, high transfection efficiency and low toxicity were observed.

키워드

과제정보

연구 과제 주관 기관 : 충남대학교

참고문헌

  1. D. H. Charych, J. O. Nagy, W. Spevak, and M. D. Bednarski, Science, 261, 585 (1993). https://doi.org/10.1126/science.8342021
  2. Q. Huo, K. C. Russell, and R. M. Leblanc, Langmuir, 15, 3972 (1999). https://doi.org/10.1021/la990025f
  3. J. M. Kim, J. S. Lee, H. Choi, D. Sohn, and D. J. Ahn, Macromolecules, 38, 9366 (2005). https://doi.org/10.1021/ma051551i
  4. S. Okada, S. Peng, W. Spevak, and D. Charych, Acc. Chem. Res., 31, 229 (1998). https://doi.org/10.1021/ar970063v
  5. H. Ringsdorf, B. Schlarb, and J. Venzmer, Ang. Chem. Int. Ed., 27, 113 (1988). https://doi.org/10.1002/anie.198801131
  6. A. Sarkar, S. Okada, K. Komatsu, H. Nakanishi, and H. Matsuda, Macromolecules, 31, 5624 (1998). https://doi.org/10.1021/ma9803077
  7. R. W. Carpick, D. Y. Sasaki, M. S. Marcus, M. A. Eriksson, and A. R. Burns, J. Phys.-Condens. Mat., 16, R679 (2004). https://doi.org/10.1088/0953-8984/16/23/R01
  8. S. W. Lee, C. D. Kang, D. H. Yang, J. S. Lee, J. M. Kim, D. J. Ahn, and S. J. Sim, Adv. Func. Mater., 17, 2038 (2007). https://doi.org/10.1002/adfm.200600398
  9. J. Yoon, S. K. Chae, and J. M. Kim, J. Am. Chem. Soc., 129, 3038 (2007). https://doi.org/10.1021/ja067856+
  10. Z. Z. Yuan, C. W. Lee, and S. H. Lee, Angew. Chem. Int. Ed., 43, 4197 (2004). https://doi.org/10.1002/anie.200453995
  11. R. G. Crystal, Science, 270, 404 (1995). https://doi.org/10.1126/science.270.5235.404
  12. T. Fujita, M. Furuhata, Y. Hattori, H. Kawakami, K. Toma, and Y. Maitani, J. Contr. Rel., 129, 124 (2008). https://doi.org/10.1016/j.jconrel.2008.04.010
  13. M. Johnson-Saliba and D. A. Jans, Curr. Drug Targets, 2, 371 (2001). https://doi.org/10.2174/1389450013348245
  14. S. Y. Wong, J. M. Pelet, and D. Putnam, Prog. Polym. Sci., 32, 799 (2007). https://doi.org/10.1016/j.progpolymsci.2007.05.007
  15. J. S. Choi, E. J. Lee, H. S. Jang, and J. S. Park, J. Biochem. Mol. Biol., 33, 476 (2000).
  16. M. Furuhata, H. Kawakami, K. Toma, Y. Hattori, and Y. Maitani, Int. J. Pharm., 316, 109 (2006). https://doi.org/10.1016/j.ijpharm.2006.02.041
  17. M. Morille, C. Passirani, A. Vonarbourg, A. Clavreul, and J. P. Benoit, Biomaterials, 29, 3477 (2008). https://doi.org/10.1016/j.biomaterials.2008.04.036
  18. R. C. Mulligan, Science, 260, 926 (1993). https://doi.org/10.1126/science.8493530
  19. D. Peer, J. M. Karp, S. Hong, O. C. Farokhzad, R. Margalit, and R. Langer, Nature Nanotech., 2, 751 (2007). https://doi.org/10.1038/nnano.2007.387
  20. S. K. Kwon, S. W. Kim, and Y. J. Kim, Polymer(Korea), 34, 501 (2010).
  21. S. K. Kwon, K. H. Jeong, and Y. J. Kim, Polymer(Korea), 33, 213 (2009).
  22. J. S. Choi, K. Nam, J. Y. Park, J. K. Lee, and J. S. Park, J. Contr. Rel., 99, 445 (2004). https://doi.org/10.1016/j.jconrel.2004.07.027
  23. G. S. Yu, Y. M. Bae, H. Choi, B. Kong, I. S. Choi, and J. S. Choi, Bioconjug. Chem., 22, 1046 (2011). https://doi.org/10.1021/bc100479t

피인용 문헌

  1. Biopolymeric Mucin and Synthetic Polymer Analogs: Their Structure, Function and Role in Biomedical Applications vol.8, pp.3, 2016, https://doi.org/10.3390/polym8030071
  2. Development of Polydiacetylene-Based Testosterone Detection as a Model Sensing Platform for Water-Insoluble Hormone Analytes vol.9, pp.7, 2013, https://doi.org/10.3390/chemosensors9070176