DOI QR코드

DOI QR Code

매설심도에 따른 가스 배관의 응력 변형 특성

Stress and Strain Distribution of Gas Pipe According to Buried Depth

  • 조진우 (한국건설기술연구원 GEO-인프라 연구실) ;
  • 최봉혁 (한국건설기술연구원 GEO-인프라 연구실) ;
  • 조원범 (한국건설기술연구원 GEO-인프라 연구실) ;
  • 김진만 (한국건설기술연구원 GEO-인프라 연구실) ;
  • 홍성경 (한국가스공사 연구개발원) ;
  • 정석영 (한국가스공사 연구개발원) ;
  • 김준호 (한국가스공사 연구개발원)
  • Cho, Jinwoo (Dept. of Geotechnical Engineering Research Division, Korea Institute of Construction Technology) ;
  • Choi, Bonghyuck (Dept. of Geotechnical Engineering Research Division, Korea Institute of Construction Technology) ;
  • Cho, Wonbeom (Dept. of Geotechnical Engineering Research Division, Korea Institute of Construction Technology) ;
  • Kim, Jinman (Dept. of Geotechnical Engineering Research Division, Korea Institute of Construction Technology) ;
  • Hong, Seongkyeong (Dept. of Gas Facility Research Group, Korea Gas Corporation) ;
  • Jeong, Sekyoung (Dept. of Gas Facility Research Group, Korea Gas Corporation) ;
  • Kim, Joonho (Dept. of Gas Facility Research Group, Korea Gas Corporation)
  • 투고 : 2013.06.04
  • 심사 : 2013.10.10
  • 발행 : 2013.10.31

초록

최근 들어 다양한 재료 및 제조기술의 개발로 가스관 품질이 향상되어 매설심도를 저심도화 할 수 있는 환경이 조성되고 있다. 또한 선진 외국과 비교하여 국내 매설깊이 기준이 약 50cm 정도 깊은 것으로 조사되어 시공비용, 차량지체비용 등을 고려하였을 때 비효율적인 매설깊이 규정인 것으로 판단된다. 따라서 본 연구에서는 매설깊이 변화(0.8m, 1.0m, 1.2m)에 따른 가스관의 응력 및 변형 거동을 분석하였다. 본 연구에서는 수치해석 및 현장시험을 통하여 매설심도 변화에 따른 가스관(API 5L)의 거동특성을 분석하였다. 분석결과, 매설심도의 감소가 가스관의 응력, 변형 특성에 큰 영향을 미치지 않을 것으로 판단되었다.

Recently, improvement of materials and technologies for the manufacturing of gas pipe has it possible to reduce the buried depth. Compared to the criteria from advanced countries, Korea has conservative criteria for the buried depth of pipeline(about 50cm deeper). Therefore, this study investigated the effect of various buried depth(0.8m, 1.0m, 1.2m) on the stress and strain distribution of gas pipe. Numerical analysis and field tests were carried out with API 5L steel gas pipes. From the results, it can be suggested that the change of buried depth would not significantly affect the stress and strain distribution of gas pipe.

키워드

참고문헌

  1. J. H. Won, M. K. Kim, H. K Yoo, M. S. Kim, "Stress Distribution of Buried Gas Transportation Pipeline According to Vehicle Load Velocity", KIGAS Vol. 12, No. 1, pp.7-12, (2008)
  2. Korea Electric Power Research Institute(KEPRI), A Study on the Development of New Technology for Economical Construction of Underground Power Distribution System, Technical Report, pp.14-59 (2002)
  3. Korea Institute of Construction Technology(KICT), Development of Numerical Analysis Techniques and D/B System for Buried Gas Pipes, Technical Report, pp.273-281(2012)
  4. H. K Yoo, J. H. Won, M. K. Kim, M. S. Kim, "Dynamic Response of Underground Three-layered Pipeline Subjected to Pile Driving Loads : II. Cover Depth", KIGAS Vol. 15, No. 4, pp.15-20, (2011) https://doi.org/10.7842/kigas.2011.15.4.015
  5. S. H Cho, J. H. Won, J. J Kim, M. K. Kim, "Experimental and Numerical Analysis on Vibration Behavior of Underground Three-layered Pipeline subjected to Dump Truck Loads", KIGAS Vol. 15, No. 1, pp.22-29, (2011) https://doi.org/10.7842/kigas.2011.15.1.022
  6. J.W. Cho, W.B. Cho, B.H. Choi, J.M. Kim, S.Y. Jeong, J.H. Kim, S.K. Hong, "The effect of buried depth on the behavior of buried gas pipe", KGES 2012 fall conference(Seoul, Korea), pp.169-172, (2012)
  7. Itasca, FLAC3D Dynamic Analysis Manual, Itasca Consulting Group Inc., USA, (2010)
  8. J. Lysmer and G. Wass, "Shear Waves in Plane Infinite Structures", Engng. Mech. Div. ASCE, 98, 85-105, (1972)
  9. T.G. Gurowski and C.L. Dym, "Propagation of Ground Vibration", Sound and Vibration, Vol. 49, No. 2, pp.179-193, (1976) https://doi.org/10.1016/0022-460X(76)90495-8