References
- Aoki, H., E. Nagashima and T. Miura(1990), Effect of Shot Peening Conditions on Fatigue Strengh of Carburized Steel, Proceeding of the 4th International Conference on Shot Peening, Tokyo, pp. 513-518.
- Ebenau, A., D. Lphe, O. Vohringer and E. Macherauch(1990), Influence Shot Peening on the Microstructure and the Bending Fatigue Strength of Bainitic-austenitic Nodular Cast Iron, Proceeding of the 4th International Conference on Shot Peening, Tokyo, Vol. 1, pp. 389-398.
- Eckersley, J. S.(1991), Shot Peening Plays a Vital Roll in Rejuvenation of Aging Aircraft, Shot Peening Theory and Application, Institute for Industrial Technology International, France, pp. 241-255.
- Harada Y.(2008), Application in Joinning of Shot Pinning Technology, The Journal of Transaction of Material Processing, Vol. 17, No. 8, pp. 541-549. https://doi.org/10.5228/KSPP.2008.17.8.541
-
Hong, S. M., M. K. Lee, G. H. Kim, K. H. Kim, W. W. Kim and S. I. Hong(2004), Improvement of the Resistance to Cavitation Erosion by the Formation of
$\beta$ ' Martensite in Flame-quenched Cu-9Al-4.5Ni-4.5Fe Alloys, Journal of the Korean Institute of Surface Engineering, Vol. 37, No. 4, pp. 234-241. - Im, M. H.(2011), Cavitation Characteristics on Impeller Materials of Centrifugal Pump for Ship in Sea Water and Fresh Water, Corrosion Science and Technology, Vol. 10, No. 6, pp. 218-224.
- Jones, D.(1964), American Society for Metals, Metal Handbook, 8th ed., Vol. 2, pp. 398-405.
- Lee, S. H. and H. S. Kim(1999), The Effect of 2-Step Shot Peening on the Fatigue Behavior of Spring Steel, Transactions of the KSME A, Vol. 23, No. 1, pp. 140-147.
- Muller, M. P., C. Verpoort and G. H. Gessinger(1981), The Influence of Shot Peening on the Fatigue and Corrosion Fatigue Behavior of an Austentic-Ferritic Stainless Steel, Proceeding of the 1st International Conference on Shot Peening, Paris, Vol. 1, pp. 479-484.
- Park, I. C., K. Y. Hyun, J. C. Park, S. K. Jang and S. J. Kim(2013), Proceeding of the Korean Society of Marine Environment & Safety in Spring, Mokpo, pp. 209.
- Park, K. D. and H. J. Ryu(2005), A Effect of Shot Peening for Fatigue Life of Spring Steel for Vessel Application, Journal of the Korean Society of Marine Engineering, Vol. 29, No. 4, pp. 426-435.
- Petersen, A. G., D. Klenerman and W. M. Hedges(2004), Evaluation of the Effect of Carbon Dioxide Corrosion Inhibitors on Cavitation Damage Caused during the Ultrasound Test, Corrosion, Vol. 60, No. 2, pp. 187-194. https://doi.org/10.5006/1.3287719
- Tange, A. and N. Takamura(1990), Relation between Shot-peening Residual Stress Distribution and Fatigue Crack Propagation Life in Spring Steel, Proceeding of the 4th International Conference on Shot Peening, Tokyo, Vol. 1, pp. 243-253.
- Verpoort, C. M. and C. Gerdes(1989), Influence of Shot Peening on Material Properties of Turbine Blades, Shot Peening Theory and Application, Institute for Industrial Technology Transfer International, France, pp. 11-70.
- Wohlfahrt, H.(1984), The Influence of Peening Conditions on the Resulting Distribution of Residual Stress, Proceeding of the 2nd International Conference on Shot Peening, Chicago, pp. 316-331.
Cited by
- Passivity of Spring Steels with Compressive Residual Stress vol.8, pp.10, 2018, https://doi.org/10.3390/met8100788
- Strategy for Surface Post-Processing of AISI 316L Additively Manufactured by Powder Bed Fusion Using Ultrasonic Nanocrystal Surface Modification vol.11, pp.5, 2021, https://doi.org/10.3390/met11050843