해양환경안전학회지 (Journal of the Korean Society of Marine Environment & Safety)

  • 제19권5호
  • /
  • Pages.538-544
  • /
  • 2013
  • /
  • 1229-3431(pISSN)
  • /
  • 2287-3341(eISSN)
해양환경안전학회 (The Korean Society of Marine Environment and safety)
권호 표지
DOI QR코드

DOI QR Code

해양환경 하에서 Ni-Cr계 자용성 합금 코팅된 ALBC3 합금의 캐비테이션 특성 평가

Evaluation of Cavitation Characteristics for ALBC3 Alloy Coated with Ni-Cr Series Self Fluxing Alloy in Marine Environment

  • 이승준 (목포해양대학교 기관시스템공학부) ;
  • 김성종 (목포해양대학교 기관시스템공학부)
  • 투고 : 2013.07.18
  • 심사 : 2013.10.25
  • 발행 : 2013.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 ALBC3 합금에 Ni기 자용성 합금으로 내마모성 및 내캐비테이션 특성을 향상시키기 위하여 용사코팅 후 열처리를 실시하여 캐비테이션 특성을 평가하였다. 본 연구 결과, 자용성 합금 코팅층이 높은 경도를 나타내어 내마모성이 우수할 것으로 판단되나, 다공질의 조직으로 인해 열악한 내캐비테이션 특성을 나타냈다. 따라서 열처리 조건의 최적화가 중요하며, 본 조건에서는 열처리 온도를 높여 자용성 합금 내 B와 Si의 유동성을 증가시킴으로써 기공이나 결함을 제거하여 특성개선 효과를 기대할 수 있을 것으로 판단된다.

In this study, cavitation characteristics of a thermal spray coating were evaluated in order to improve durability and cavitation resistance. For a coating material, a Ni-based self-fluxing alloy was thermal-sprayed over a ALBC3 alloy substrate and subsequently modified by heat treatment.The resulted self-fluxing coating layer had relatively high hardness compared to the base material, and thus would be expected to exhibit good durability. However, the cavitation characteristics were deteriorated due to the intrinsic porous structure of the coating. Therefore, it is essential to optimize heat treatment condition during thermal spraying coating process for self-fluxing alloy, and in this research the increase in heat treatment temperature is thought to increase the fluidity of B and Si in the self-fluxing alloy and to remove pores or defects, leading to the characteristics enhancement.

키워드

참고문헌

  1. Ahmed, S. M., K. Hokkirigawa, Y. Ito and R. Oba(1991), Scanning electron microscopy observation on the incubation period of vibratory cavitation erosion, Wear, Vol. 142, pp. 303-314. https://doi.org/10.1016/0043-1648(91)90171-P
  2. Al-Hashem, A., A. Abdullah and W. Riad(2001), Cavitation corrosion of nodular cast iron (NCI) in seawater Microstructural effects, Materials Characterization, Vol. 47, No. 5, pp. 383 388.
  3. Al-Hashem, A. and W. Riad(2002), The role of microstructure of nickel-aluminium-bronze alloy on its cavitation corrosion behavior in natural seawater, Materials Characterization, Vol. 48, pp. 37-41. https://doi.org/10.1016/S1044-5803(02)00196-1
  4. Bae, M. W., B. H. Park and H. Jung(2012), A study on improvement of durability for run-out table roller with hot rolling by porous self-fluxing alloy coating, The Korean Society of Marine Engineering, Vol. 36, No. 2, pp. 276-285. https://doi.org/10.5916/jkosme.2012.36.2.276
  5. Buckley, D. H.(1985), Tribological properties of structural ceramics, NASA, pp. 293-365.
  6. DeMasi-Marcin, J. T. and D. K. Gupta(1994), Protective coatings in the gas turbine engine, Surface and Coatings Technology, Vol. 68-69, pp. 1-9. https://doi.org/10.1016/0257-8972(94)90129-5
  7. Hauschmann, L.(1992), Plasma sprayed coatings under cyclic contact pressure on a small area, Proceedings of the international thermal spray conference & exposition, orlando, pp. 723-727.
  8. Iwai, Y., T. Okada and S. Tanaka(1989), A study of cavitation bubble collapse pressures and erosion part 2: Estimation of erosion from the distribution of bubble collapse pressures, Wear, Vol. 133, No. 2, pp. 233-243. https://doi.org/10.1016/0043-1648(89)90038-0
  9. Kamo, L., R. Kamo and E. Valdmanis(1991), Ceramic coatings for aluminum engine blocks, SAE911719, pp. 175-184.
  10. Kim, K. T., Y. S. Kim and M. S. Oh(2007), Effect of Heat Treatment Conditions on the Microstructure and Wear Behavior of Ni-based Self-flux Alloy Coatings, Journal of the Korea society for power system engineering, Vol. 11, No. 1, 121-126.
  11. Knotek, O. and E. Lugscheider(1974), On the structure of Ni Cr B Si hardfacing alloys and their bonding reactions, Journal of Vacuum Science & Technology Archives, Vol. 11, No. 4, pp. 798-801. https://doi.org/10.1116/1.1312756
  12. Kwok, C. T., F. T. Cheng and H. C. Man(2000), Laser surface modification of UNS S31603 stainless steel. Part II: cavitation erosion characteristics, Materials science & engineering Structural materials, Vol. 290, No. 1-2, pp. 74-88. https://doi.org/10.1016/S0921-5093(00)00930-8
  13. Lee, S. J., K. H. Kim and S. J. Kim(2012), Surface analysis of Al-Mg alloy series for ship after cavitation test, Surface and Interface Analysis, DOI 10.1002/sia.4953.
  14. Lee, S. J. and S. J. Kim(2012), Evaluation of cavitation characteristics of 5083-O Al alloy with amplitude, Corrosion Science and Technology, Vol. 11, No. 5, pp. 205-212. https://doi.org/10.14773/cst.2012.11.5.205
  15. Miguel, J. M., J. M. Guilemany and S. Vizcaio(2003), Tribological study of NiCrBSi coating obtained by different processes, Tribology International, Vol. 36, No. 3, pp.181-187. https://doi.org/10.1016/S0301-679X(02)00144-5
  16. Mori, H., S. Hattori and T. Okada(1998), Role of bubble collapse pressure in cavitation erosion, JSME international journal Mechanics and material engineering, Vol. 41, No. 1, pp. 96-102.
  17. Münsterer, S. and K. Kohlhof(1995), Cavitation protection by low temperature TiCN coatings, Surface & Coatings Technology, Vol. 74-75, No. 1-3/2, pp. 642-647. https://doi.org/10.1016/0257-8972(95)08265-4
  18. Okada, T., Y. Iwai and K. Awazu(1989), Study of cavitation collapse pressure and erosion, Part I: A method for measurement of collapse pressure, Wear, Vol. 133, pp. 219-232. https://doi.org/10.1016/0043-1648(89)90037-9
  19. Otsubo, F., H. Era and K. Kishitake(2000), Structure and phases in nickel-base self-fluxing alloy coating containing high cromium and boron, Journal of Thermal Spray Technology, Vol. 9, No. 1, pp. 107-113. https://doi.org/10.1361/105996300770350131
  20. Rigney, D. V., R. Viguie and D. J. Wortman and D. W. Skelly(1997), PVD thermal barrier coating applications and process development for aircraft engines, Journal of Thermal Spray Technology, Vol. 6, No. 2, pp. 167-175. https://doi.org/10.1007/s11666-997-0008-6
  21. Ruckle, D. L.(1980), Plasma-sprayed ceramic thermal barrier coatings for turbine vane platforms, Thin Solid Films, Vol. 73, No. 2, pp. 455-461. https://doi.org/10.1016/0040-6090(80)90514-3
  22. Shalaby, H. M., A. Al-Hashem and H. AL-Mazeedi and A. Abdullah(1995), Field and laboratory study of cavitation corrosion of nickel aluminium bronze in sea water, British Corrosion Journal, Vol. 30, No. 1, pp. 63-70. https://doi.org/10.1179/000705995798114221
  23. Suh, N. P.(1977), An overview of the delamination theory of wear, Wear, Vol. 44, No. 1, pp. 1-16. https://doi.org/10.1016/0043-1648(77)90081-3
  24. Tang, C. H., F. T. Cheng and H. C. Man(2004), Improvement in cavitation erosion resistance of a copper-based propeller alloy by laser surface melting, Surface and Technology, Vol. 182, pp. 300-307. https://doi.org/10.1016/j.surfcoat.2003.08.048
  25. Vakil, N. and E. C. Everbach(1993), Transient acoustic cavitation in gallstone fragmentation: A study of gallstones fragmented in vivo, Ultrasound in Medicine & Biology, Vol. 19, No. 4, pp. 331-342. https://doi.org/10.1016/0301-5629(93)90105-W
  26. Zhou, Z., H. Shirasawa, N. Eguchi, and A. Ohmori(1999), Microstructures and characterization of zirconia-yttria coatings formed in laser and hybrid spray process, Journal of Thermal Spray Technology, Vol. 8, No. 3, pp. 405-413. https://doi.org/10.1361/105996399770350359

피인용 문헌

  1. Cavitation Damage Characteristics of Al and Zn Arc Thermal Spray Coating Layers for Hull Structural Steel vol.49, pp.1, 2016, https://doi.org/10.5695/JKISE.2016.49.1.32
  2. Cavitation-Erosion Characteristics of the Stainless Steel with Adding Ti Stabilizer Element in Sea Water vol.49, pp.4, 2016, https://doi.org/10.5695/JKISE.2016.49.4.344