References
- Ahmed, S. M., K. Hokkirigawa, Y. Ito and R. Oba(1991), Scanning electron microscopy observation on the incubation period of vibratory cavitation erosion, Wear, Vol. 142, pp. 303-314. https://doi.org/10.1016/0043-1648(91)90171-P
- Al-Hashem, A., A. Abdullah and W. Riad(2001), Cavitation corrosion of nodular cast iron (NCI) in seawater Microstructural effects, Materials Characterization, Vol. 47, No. 5, pp. 383 388.
- Al-Hashem, A. and W. Riad(2002), The role of microstructure of nickel-aluminium-bronze alloy on its cavitation corrosion behavior in natural seawater, Materials Characterization, Vol. 48, pp. 37-41. https://doi.org/10.1016/S1044-5803(02)00196-1
- Bae, M. W., B. H. Park and H. Jung(2012), A study on improvement of durability for run-out table roller with hot rolling by porous self-fluxing alloy coating, The Korean Society of Marine Engineering, Vol. 36, No. 2, pp. 276-285. https://doi.org/10.5916/jkosme.2012.36.2.276
- Buckley, D. H.(1985), Tribological properties of structural ceramics, NASA, pp. 293-365.
- DeMasi-Marcin, J. T. and D. K. Gupta(1994), Protective coatings in the gas turbine engine, Surface and Coatings Technology, Vol. 68-69, pp. 1-9. https://doi.org/10.1016/0257-8972(94)90129-5
- Hauschmann, L.(1992), Plasma sprayed coatings under cyclic contact pressure on a small area, Proceedings of the international thermal spray conference & exposition, orlando, pp. 723-727.
- Iwai, Y., T. Okada and S. Tanaka(1989), A study of cavitation bubble collapse pressures and erosion part 2: Estimation of erosion from the distribution of bubble collapse pressures, Wear, Vol. 133, No. 2, pp. 233-243. https://doi.org/10.1016/0043-1648(89)90038-0
- Kamo, L., R. Kamo and E. Valdmanis(1991), Ceramic coatings for aluminum engine blocks, SAE911719, pp. 175-184.
- Kim, K. T., Y. S. Kim and M. S. Oh(2007), Effect of Heat Treatment Conditions on the Microstructure and Wear Behavior of Ni-based Self-flux Alloy Coatings, Journal of the Korea society for power system engineering, Vol. 11, No. 1, 121-126.
- Knotek, O. and E. Lugscheider(1974), On the structure of Ni Cr B Si hardfacing alloys and their bonding reactions, Journal of Vacuum Science & Technology Archives, Vol. 11, No. 4, pp. 798-801. https://doi.org/10.1116/1.1312756
- Kwok, C. T., F. T. Cheng and H. C. Man(2000), Laser surface modification of UNS S31603 stainless steel. Part II: cavitation erosion characteristics, Materials science & engineering Structural materials, Vol. 290, No. 1-2, pp. 74-88. https://doi.org/10.1016/S0921-5093(00)00930-8
- Lee, S. J., K. H. Kim and S. J. Kim(2012), Surface analysis of Al-Mg alloy series for ship after cavitation test, Surface and Interface Analysis, DOI 10.1002/sia.4953.
- Lee, S. J. and S. J. Kim(2012), Evaluation of cavitation characteristics of 5083-O Al alloy with amplitude, Corrosion Science and Technology, Vol. 11, No. 5, pp. 205-212. https://doi.org/10.14773/cst.2012.11.5.205
- Miguel, J. M., J. M. Guilemany and S. Vizcaio(2003), Tribological study of NiCrBSi coating obtained by different processes, Tribology International, Vol. 36, No. 3, pp.181-187. https://doi.org/10.1016/S0301-679X(02)00144-5
- Mori, H., S. Hattori and T. Okada(1998), Role of bubble collapse pressure in cavitation erosion, JSME international journal Mechanics and material engineering, Vol. 41, No. 1, pp. 96-102.
- Münsterer, S. and K. Kohlhof(1995), Cavitation protection by low temperature TiCN coatings, Surface & Coatings Technology, Vol. 74-75, No. 1-3/2, pp. 642-647. https://doi.org/10.1016/0257-8972(95)08265-4
- Okada, T., Y. Iwai and K. Awazu(1989), Study of cavitation collapse pressure and erosion, Part I: A method for measurement of collapse pressure, Wear, Vol. 133, pp. 219-232. https://doi.org/10.1016/0043-1648(89)90037-9
- Otsubo, F., H. Era and K. Kishitake(2000), Structure and phases in nickel-base self-fluxing alloy coating containing high cromium and boron, Journal of Thermal Spray Technology, Vol. 9, No. 1, pp. 107-113. https://doi.org/10.1361/105996300770350131
- Rigney, D. V., R. Viguie and D. J. Wortman and D. W. Skelly(1997), PVD thermal barrier coating applications and process development for aircraft engines, Journal of Thermal Spray Technology, Vol. 6, No. 2, pp. 167-175. https://doi.org/10.1007/s11666-997-0008-6
- Ruckle, D. L.(1980), Plasma-sprayed ceramic thermal barrier coatings for turbine vane platforms, Thin Solid Films, Vol. 73, No. 2, pp. 455-461. https://doi.org/10.1016/0040-6090(80)90514-3
- Shalaby, H. M., A. Al-Hashem and H. AL-Mazeedi and A. Abdullah(1995), Field and laboratory study of cavitation corrosion of nickel aluminium bronze in sea water, British Corrosion Journal, Vol. 30, No. 1, pp. 63-70. https://doi.org/10.1179/000705995798114221
- Suh, N. P.(1977), An overview of the delamination theory of wear, Wear, Vol. 44, No. 1, pp. 1-16. https://doi.org/10.1016/0043-1648(77)90081-3
- Tang, C. H., F. T. Cheng and H. C. Man(2004), Improvement in cavitation erosion resistance of a copper-based propeller alloy by laser surface melting, Surface and Technology, Vol. 182, pp. 300-307. https://doi.org/10.1016/j.surfcoat.2003.08.048
- Vakil, N. and E. C. Everbach(1993), Transient acoustic cavitation in gallstone fragmentation: A study of gallstones fragmented in vivo, Ultrasound in Medicine & Biology, Vol. 19, No. 4, pp. 331-342. https://doi.org/10.1016/0301-5629(93)90105-W
- Zhou, Z., H. Shirasawa, N. Eguchi, and A. Ohmori(1999), Microstructures and characterization of zirconia-yttria coatings formed in laser and hybrid spray process, Journal of Thermal Spray Technology, Vol. 8, No. 3, pp. 405-413. https://doi.org/10.1361/105996399770350359
Cited by
- Cavitation Damage Characteristics of Al and Zn Arc Thermal Spray Coating Layers for Hull Structural Steel vol.49, pp.1, 2016, https://doi.org/10.5695/JKISE.2016.49.1.32
- Cavitation-Erosion Characteristics of the Stainless Steel with Adding Ti Stabilizer Element in Sea Water vol.49, pp.4, 2016, https://doi.org/10.5695/JKISE.2016.49.4.344