한국정보통신학회논문지 (Journal of the Korea Institute of Information and Communication Engineering)

  • 제17권12호
  • /
  • Pages.2914-2920
  • /
  • 2013
  • /
  • 2234-4772(pISSN)
  • /
  • 2288-4165(eISSN)
한국정보통신학회 (The Korea Institute of Information and Commucation Engineering)
권호 표지
DOI QR코드

DOI QR Code

열처리에 의한 Cu(In,Ga)Se2 태양전지 특성에 관한 연구

A study on Cu(In,Ga)Se2 solar cell characteristic by sintering

  • 투고 : 2013.07.29
  • 심사 : 2013.09.23
  • 발행 : 2013.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문은 동시진공증발법으로 제작된 시편을 $500^{\circ}C$에서 열처리한 시편은 기공이 많이 발생되어 결정결함이 발생 되었어 열처리 시 Se분위기하에서 실행을 해야 된다는 것을 알 수가 있었다. 기판온도를 $430^{\circ}C$, $460^{\circ}C$, $480^{\circ}C$, $500^{\circ}C$로 변화주어 제작된 시편을 열처리 한 결과 결정입자 크기가 증가되어 밀도가 향상되었다. 그리고 XRD 분석결과, 열처리 후에 Cu2Se상이 제거되었으며 열처리 전 후의 흡수지수는 큰 변화가 없었다. 이것은 흡수지수는 열처리보다 시편 두께에 의해 결정된다는 것을 알 수가 있었다.

In this paper, we prepared the samples with the heat-treated substrate by means of co-evaporation method. The samples prepared with heat-treated substrate of $500^{\circ}C$showed the vacancy on the surface, and it could be prevented by Se ambient condition. The samples prepared with variable heat-treated substrates such as $430^{\circ}C$, $460^{\circ}C$, $480^{\circ}C$ and $500^{\circ}C$ showed the increase of grain resulted to the increase of the density. Based on the XRD analysis, the heat treatment could remove the Cu2Se phase of the samples, but it didn't affect the absorption index of the samples. We, therefore, conclude the absorption index is not affected by heat treatment and is controlled by the thickness of the sample.

키워드

참고문헌

  1. S.N.Chu, J.C.Park "Properties of CuInSe2 Thin Film with Various Substrate Temperatures" The Korean Institues of Electrical and Electronic Material Engineers, Vol.11, No. 23, p.911, 2010.
  2. H.Monig, R.Caballero, C.A.Kaufmann, T.L.Schmidt, M.Ch. Lux-Steiner, S.Sadewasser, "Nanoscale investigtions of the electronic surface properties of Cu(In,Ga)Se2 thihn film by scanning tunneling spectroscopy", Solar Energy Materials&Solar ells, Vol.95, p.1537-543, 2011.
  3. L.Gutay, C.Lienau, G.H.Bauer, "Subgrain size inhomogeneities in the luminesence spectra of thin film chalcopyrites", Appl.Phys. ett. p.97, 2010.
  4. D.A.Ras, M.A.Contrersa, R.Noufi, H.W.Schock, "Impact of the Se evaporation rate in the microstructure and texture of Cu(In, Ge)Se2 thin films for solar cells", Thin Solid Films. Vol.517, pp.2218-2221, 2009. https://doi.org/10.1016/j.tsf.2008.10.133
  5. M.Chandramohan, "Experimental and theoretical investigations of structural and optical properties of CIGS thin films", Materials Science and Engineering, in press, 2010.
  6. A. S. Kindyak, V. V. Kindyak, Y. V.ud, "The valence band strucure in chalcopyrite Cu(In, Ga)Se2 films", semiconducores, Vol.30, No.9, pp.882-885,1997.
  7. J.F.Guillemoles, L.Kronik, D.Cahen, U.Rau, A. Jasenek, H.W.Schock, "Stability Issues of Cu(In,Ga)Se2-Based Sola Cells", J.Phys. Chem.B Vol.104, pp.4849-4864, 2000. https://doi.org/10.1021/jp993143k
  8. P.Guha, S.N.Kundu, S.Chaudhuri, and A.K.Pal, "Elelctron transport processes in CuIn1-xGaxSe2 films prepared by four source co-evaporation techmique", Materials Chemistry and Physics, Vol.74, pp.192-200, 2002. https://doi.org/10.1016/S0254-0584(01)00462-X
  9. K.Ramanathan, G. Teeter, J.C.Keane, R.Noufi, "Properties of high-efficiency $CuInGaSe_2$ thin film solar cells", Thin Solid Films. Vol.480, No.481, pp.499-502, 2005.
  10. E.Wallin, T.Jarmar, U.Malm, M.Edoff, L.Stolt. "Influence of the average Se-to-metal overpressure during coevaporation of $Cu(InxGa1-x)Se_2$", Thin Solid Films, Ariticel in Press, 4, 2011.
  11. Zhang Ning, Zhuang Da-Ming, Zhang Gong, "An investigation on preparation of CIGS targets by sintering process" Materials Science and Engineering B., 166, p.3-40, 2010.
  12. S.N. Chu, J.C.Park "A study on CIGS thin film characteristic with composition ration change" The korea Institute of Information and Communication Engineering, Vol.16, No.10, p.2248- 2252, 2012.