DOI QR코드

DOI QR Code

The Evaluation of Sleeve Appearance on Sleeve Easing Contraction Using Virtual Garment Simulation

가상착의 시뮬레이션을 이용한 소매 오그림량 배분에 따른 외관평가

  • Oh, Young Soon (Dept. of Clothing &Textiles, Changwon National University) ;
  • Kim, Yeo Sook (Dept. of Clothing &Textiles, Changwon National University)
  • Received : 2013.08.02
  • Accepted : 2013.10.22
  • Published : 2013.12.31

Abstract

The purpose of this study is to quantitatively analyze the impacts of the distribution of easing contraction of the sleeve on the external appearance of bodice and sleeve through virtual clothing simulation. Virtual clothing is conducted by differentiating the sleeve easing in accordance with the experimental condition of bodice and sleeve that are followed by draping. And then the evaluation is carried out. As a result of an analysis of the similarity between the virtual garment and the actual clothing, the whole external appearance of the bodice and sleeve was expressed similarly. The external appearance according to the distribution of easing contraction got better as the easing contraction of sleeve was concentrated on sleeve cap in front while the appearance was better at the back as it was more gently distributed than in the front. In a comparison of armhole form, the clothing of which the top of it was most similar to S0 was S4 in which the gap between the armhole and the arm was the least and the front and rear silhouette fell relatively well. In a comparison between the position of bust circumference line and that of the sleeve base line, the front of the sleeve matched the bust circumference line as the easing contraction was distributed close to the center of the sleeve cap while in the back, the sleeve base line and the bust circumference line matched when some easing contraction ratio was added close to the armpit point. The cross section figures of garment space of the shoulder, the margin was evenly distributed in S4 or S5 with differing distributions of easing contraction in the front and the back. This study is significant in that it supplies the objective baseline data which makes a novice more able to make a good external appearance of the sleeve.

Keywords

References

  1. Choi HJ(1995) A study on the ergonomic sleeve design by body surface at upper extremity. J Korean Soc Clothing Textiles 19(6), 911-923
  2. Grace F(1998) Office etiquette and protocol. New York; Learning Express
  3. Han MR, Kim YS(2012) The relevances of the ease and the appearance by changing the sleeve cap height using virtual gament system. Korean J Community Living Sci 23(2), 189-198 https://doi.org/10.7856/kjcls.2012.23.2.189
  4. Jo DN(2004) Biotypological rule pattern. Seoul: Gyeongchunsa
  5. Kang SH, Kim GH(2007) Actual work of clothing construction. Seoul: Ejongmoonhwangsa
  6. Kang SH, Suh MA(2004) Practical clothing construction. Seoul: Gyomunsa
  7. Kim HK, Suh CY, Park SJ(1999) Study on the determination of ease amount according to the body surface change of upper arm and scapula. Yonsei J Human Ecol 13, 1-8
  8. Kim SM, Park YS, Park KP(2008) Introduction to the fundamental technologies for i-Fashion. Fashion Inf Technol 5, 64-72
  9. Koike G(1979) Sleeve. Lee HJ(1997) Seoul ; Yehaosa
  10. Korean Agency for Technology and Standards(2010) The 6th Size Korea. Available from http:// sizekorea.kats.go.kr [cited 2012 May 13]
  11. Lee JS, Lee JR(2013) Comparison on the pants fitting for obese women between 3D virtual garment and real garment. J Fashion Business 17(2), 33-45 https://doi.org/10.12940/jfb.2013.17.2.33
  12. Lim JH(1995) Effect of upper arm circumference on the ease of sleeve arm hole circumference. Master's thesis, Kyungpook Sanup University
  13. Moon JH(2010) A comparative analysis of basic foundation patterns in bodice and sleeve for the education of clothing construction. Master's Thesis, Ulsan University
  14. Moon NW, Cho HJ(2001) A comparative study on the two-piece sleeve pattermaking. Res J Costume Culture 9(5), 700-711
  15. Park HS, Lee MH, Lee MY(2009) Occident clothing construction. Seoul ; Soohaksa
  16. Sohn HS, Chio HS, Lee HS(2004) Practice of clothing construction. Seoul; Korea National Open University Press

Cited by

  1. Development of Bodice Block Reflects Brassiere Cup Size vol.28, pp.1, 2017, https://doi.org/10.7856/kjcls.2017.28.1.69
  2. Digital-Based Healthy Bra Top Design That Promotes the Physical Activity of New Senior Women by Applying an Optimal Pressure vol.18, pp.9, 2013, https://doi.org/10.3390/ijerph18094651
  3. 비신축성 직물의 고무 밴드 봉제 조건에 따른 신장 특성 분석 vol.45, pp.4, 2013, https://doi.org/10.5850/jksct.2021.45.4.648