References
- Kim, K.S., Bea, K.M., Oh, S.Y., Seo, M.K., Kang, C.G., and Park, S.J., "Trend of Carbon Fiber-reinforced Composites for Lightweight Vehicles," Elastomers and Composites, Vol. 47, No. 1, 2012, pp. 65-74. https://doi.org/10.7473/EC.2012.47.1.065
- Kang, W.J., and Kim, S.T., "High Strain Rate Tensile Test of Composite Material for Automotive Front End Module Carrier," The Journal of the Korean Society for Composite Materials, Vol. 24, No. 3, 2011, pp. 20-24.
- Lee, M.S., Kim, H.H., and Kang, C.G., "Effect of Surface Roughness of Al5052/CFRP Composites on the Adhesion and Mechanical Properties," The Journal of the Korean Society for Composite Materials, Vol. 26, No. 5, 2013, pp. 295-302. https://doi.org/10.7234/composres.2013.26.5.295
- Deepak, S.V., Naresh, C., and Hussiain, S.A., "Modelling and Analysis of Alloy Wheel for Four Wheeler Vehicle," International Journal of Mechanical Engineering and Robotics Research, Vol. 1, No. 3, 2012, pp. 72-80.
- Kim, B.S., "A Study on Vibration Characteristics of Automobile Al-alloy Wheel," Transactions of the Korean Society of Machine Tool Engineers, Vol. 14, No. 3, 2005, pp. 122-127.
- Kim, P.J., and Lee, D.G., "Improvement of Surface Quality and Development of Composite Wheel for Passenger Cars Manufactured by RTM," Proceeding of Conference on KSPE, Jeju, Korea, Vol. 3, No. 54, 2003, pp. 54-57.
- Yoo, S.H., Lim, T.S., Kim, H.J., Lee, Y.S., and Chang, S.H., "The Development of Composite-aluminum Hybrid Vehicle Wheel," Proceeding of conference on ACCM7, Taipei, Taiwan, 15-18 November 2010.
- Yoo, S.H., Park, S.W., and Chang, S.H., "The Design And Fabrication of a Composite-aluminum Hybrid Vehicle Wheel," Proceeding of Conference on ICCS16, Porto, Portugal, 2011.
- Yoo, S.H., and Chang, S.H., "Design and Fabrication of an Aluminum- composite Hybrid Vehicle Wheel Using Adhesive Bonding Method for Weight Reduction and Ride Comport," Proceeding of Conference on ISGMA2011, Seoul, Korea, 5-7 October, 2011.
- Kelly, G., "Quasi-static Strength and Fatigue Life of Hybrid (bonded/bolted) Composite Single-lap Joints," Composite Structures, Vol. 72, No. 1, 2006, pp. 119-129. https://doi.org/10.1016/j.compstruct.2004.11.002
- Kim, Y.H., Park, S.K., Kim, D.O., Ryu, Y.M., and Cheon, S.S., "A Study on the Shear Impact Characteristics of Adhesively Bonded Tubular Joints," The Journal of the Korean Society for Composite Materials, Vol. 25, No. 1, 2012, pp. 14-18. https://doi.org/10.7234/kscm.2012.25.1.014
Cited by
- Research on simulation of the bending fatigue test of automotive wheel made of long glass fiber reinforced thermoplastic considering anisotropic property vol.116, 2018, https://doi.org/10.1016/j.advengsoft.2017.11.004
- Lightweight design of automotive wheel made of long glass fiber reinforced thermoplastic vol.230, pp.10, 2016, https://doi.org/10.1177/0954406215583081
- Experimental Study on the Structural Integrity of Type IV Hydrogen Pressure Vessels Experienced Impact Loadings vol.29, pp.2, 2016, https://doi.org/10.7234/composres.2016.29.2.060
- Reducing defects in composite monocoque frames vol.47, pp.1, 2013, https://doi.org/10.5937/fmet1901048f
- Injection Molding of Carbon Fiber Composite Automotive Wheel vol.20, pp.12, 2013, https://doi.org/10.1007/s12221-019-9636-y
- Analysis on effect of injection residual stress on impact resistance of composite wheel made of long glass fiber reinforced thermoplastic vol.26, pp.5, 2013, https://doi.org/10.1080/13588265.2020.1757583