Transactions of the Korean Society of Mechanical Engineers B (대한기계학회논문집B)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Measurement of Radiative Heat Flux Using Plate Thermometer

판열유속계를 이용한 복사열유속 측정 실험

  • Park, Won-Hee (Eco-Transport Systems Research Division, Korea Railroad Research Institute) ;
  • Yoon, Kyung-Beom (Department of Mechanical Engineering, Chung-Ang University)
  • 박원희 (한국철도기술연구원 에코시스템연구실) ;
  • 윤경범 (중앙대학교 기계공학부)
  • Received : 2012.05.16
  • Accepted : 2012.07.11
  • Published : 2013.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

Plate thermometers are used for measuring the radiative heat flux in high-temperature surroundings. The heat flux is calculated from the temperature measured at the back surface of the stainless steel surface of the meter. Heat fluxes from a Schmidt-Boelter gauge are measured as reference heat fluxes. A combined conductive coefficient is introduced to consider the heat loss to insulation, conduction through the stainless plate depth, and conduction from the non-uniform temperature of the plate of the plate thermometer. This coefficient is obtained using the repulsive particle swarm optimization.

고온환경의 복사열유속을 측정하기 위하여 판열유속계를 제작하였다. 열유속은 스테인리스스틸로 제작된 판열속계 뒷면에서 측정된 온도를 이용하여 계산되어진다. 스미트-볼터계로 측정된 열유속을 기준값으로 이용하였다. 단열재로의 열손실, 판열유속계 두께방향으로의 전도 및 평판의 위치에 따라 온도가 상이하여 발생하는 열전달 등을 고려하기 위하여 전도상수를 도입하였다. 이 상수는 반발입자군집 최적화법으로 구하였다.

Keywords

References

  1. Park, W.-H. and Kim T.-K., 2008, "Numerical Solution of Radiative Transfer Within a Cubical Enclosure Filled with Nongray Gases Using WSGGM," Journal of Mechanical Science and Technology, Vol. 22, No. 2, pp. 1400-1407. https://doi.org/10.1007/s12206-008-0425-6
  2. Mishra, S. K., 2006, Repulsive Particle Swarm Method on Some Difficult Test Problems of Global Optimization, Munich personal repec archive.
  3. International Organisation for Standardization, 1999, ISO 834 Fire-Resistance Rests - Elements of Building Construction - Part 1: General Requirements.
  4. EN 1363 Fire Resistance Tests, Part 1: General Requirements, 1999, British Standards Institute, London, UK.
  5. Ingason, H and Wickstrom, U. 2007, "Measuring Incident Radiant Heat Flux Using the Plate Thermometer," Fire Safety Journal, Vol.42, pp. 161-166. https://doi.org/10.1016/j.firesaf.2006.08.008
  6. International Organisation for Standardization, 2002, ISO 5660 Reaction to Fire Tests - Heat Release, Smoke Production and Mass Loss Rate - Part 1: Heat Release Rate (Cone Calorimeter Method).
  7. Kennedy. J. and Eberhart, R. C., 1995, "Particle Swarm Optimization," Proceedings of the 1995 International Conference on Neural Networks, vol. 4, IEEE Press, Piscataway, NJ, pp.1942-1948.
  8. Lee, K. H., Baek, S. W. and Kim, K. W., 2008, Inverse Radiation Analysis using Repulsive Particle Swarm Optimization Algorithm, International Journal of Heat and Mass Transfer 51, pp.2772-2783. https://doi.org/10.1016/j.ijheatmasstransfer.2007.09.037
  9. Park, W.-H., Yoon, K.-B. Chang , H.-C. and Kim, T.- K., Estimation of Pyrolysis-Related Properties Using Repulsive Particle Swarm Optimization, Journal of Mechanical Science and Technology, Vol. 26, No. 7, pp. 2129-2132. https://doi.org/10.1007/s12206-012-0529-x