참고문헌
- Blevins, R.D., 1990, "Flow-Induced Vibration," Second Edition, Van Nosrtrand, New York
- Fritz, R.J., 1972, "The Effect of Liquids on the Dynamic Motions of Immersed Solids," ASME Journal of Engineering for Industry, 94, pp.167-173. https://doi.org/10.1115/1.3428107
- Pettigrew, M. J., Taylor, C.E., 1991, "Fluidelastic Instability of Heat Exchanger Tube Bundles; Review and Design Recommendations," ASME Journal of Pressure Vessel Technology, Vol. 113, pp. 242-256. https://doi.org/10.1115/1.2928752
- Price, S.J., 1995, "A Review of Theoretical Models for Fluidelastic Instability of Cylinder Arrays in Cross- Flow," Journal of Fluids and Structure, 9, pp. 463-518. https://doi.org/10.1006/jfls.1995.1028
- Carlucci, L.N., 1980, "Damping and Hydrodynamic Mass of a Cylinder in Simulated Two-Phase Flow," Journal of Mechanical Design, 102, pp597-602. https://doi.org/10.1115/1.3254791
- Carlucci, L.N. and Brown, J.D., 1983, "Experimental Studies of Damping and Hydrodynamic Mass of a Cylinder in Confined Two-Phase Flow," Journal of Vibration, Acoustics, Stress, and Reliability in Design, 105, pp.83-89. https://doi.org/10.1115/1.3269073
- Pettigrew, M.J., Taylor, C.E. and Kim, B.S., 1989a, "Vibration of Tube Bundles in Two Phase Cross Flow; Part 1 - Hydrodynamic Mass and Damping," ASME Journal of Pressure Vessel Technology, 111, pp. 466-477. https://doi.org/10.1115/1.3265705
- Pettigrew, M.J., Tromp, J.H., Taylor, C.E. and Kim, B.S., 1989b, "Vibration of Tube Bundles in Two Phase Cross Flow; Part 2 - Fluid-Elastic Instability," ASME Journal of Pressure Vessel Technology, 111, pp. 478-487. https://doi.org/10.1115/1.3265706
- Pettigrew, M.J. and Taylor, C.E., 2003, "Vibration Analysis of Shell-and-Tube Heat Exchangers; An Overview- Part 2: Vibration Response, Fretting-Wear, Guidelines," Journal of Fluids and Structure, 18, pp. 485-500. https://doi.org/10.1016/j.jfluidstructs.2003.08.008
- Jones, Owen C. Jr., and Zuber, N., 1975, "The Interrelation Between Void Fraction Fluctuations and Flow Patterns in Two-Phase Flow," International Journal of Multiphase Flow, 2, pp. 273-306. https://doi.org/10.1016/0301-9322(75)90015-4
- Legius, H.J.W.M., van den Akker, H.E.A. and Narumo, T., 1997, "Measurements on Wave Propagation and Bubble and Slug Velocities in Cocurrent Upward Two-Phase Flow," Experimental Thermal and Fluid Science, 15, pp. 267-278. https://doi.org/10.1016/S0894-1777(97)00012-5
- Schrage, D.S., Hsu, J.T. and Jensen, M.K., 1988, "Two-Phase Pressure Drop in Vertical Cross Flow Across a Horizontal Tube Bundle," AIChE J, 34, pp.107-115. https://doi.org/10.1002/aic.690340112
- Zuber, N. and Findlay, J., 1965, "Average Volumetric Concentration in Two-Phase Flow System," Trans. ASME Journal of Heat Transfer, 87, pp. 453-468 . https://doi.org/10.1115/1.3689137
- Ishii, M., Chawla, T.C. and Zuber, N., 1976, "Constitutive Equation for Vapor Drift Velocity in Two-Phase Annular Flow," AIChE, 22(2), pp.283-289, https://doi.org/10.1002/aic.690220210
- Zuber, N., Staub, F.W., Bijwaard, G. and Kroeger, P.G., 1967, "Steady State and Transient Void Fraction in Two-Phase Flow System," GEAP 5471.
- Wallis, G.B., 1969, One-Dimensional Two-Phase Flow, McGraw-Hill.
- Lockhart, R.W. and Martinelli, R.C., 1949, "Proposed Correlation of Data for Isothermal Two- Phase, Two-Component Flow in Pipes," Chemical Engineering Progress, 45, pp. 39-48.
- Baroczy, C.J., 1963, "Correlation of Liquid Fraction in Two-Phase with Application to Liquid Metals," NAA-SR-8171.
- Turner, J.R.S. and Wallis, G.B., 1965, The Separated-Cylinders Model of Two-Phase Flow, NYO- 3114-6, Thayer's School Eng., Dartmouth College.
- Butterworth, D., 1975, "A Comparison of Some Void-Fraction Relationships for Co-Current Gas- Liquid Flow," International Journal of Multiphase Flow, 1, pp. 845-850. https://doi.org/10.1016/0301-9322(75)90038-5
- Pettigrew, M. J., and Taylor, C.E., 1994, "Two-Phase Flow-Induced Vibration: an Review," ASME Journal of Pressure Vessel Technology, 116(3), pp. 233-253. https://doi.org/10.1115/1.2929583
- Cheng, H., Hills, J.H. and Azzorpardi, B.J., 2002, "Effects of Initial Bubble Size on Flow Pattern Transition in a 28.9 mm Diameter Column," International Journal of Multiphase Flow, 28, pp. 1047-1062. https://doi.org/10.1016/S0301-9322(02)00013-7
- Fenstra, P.A., Weaver, D.S. and Judd, R.L., 2000, "An Improved Void Fraction Model for Two-Phase Cross- Flow in Horizontal Tube Bundles," International Journal of Multiphase Flow, 26, pp. 1851-1873. https://doi.org/10.1016/S0301-9322(99)00118-4
- Sim, W.G., 2007, "An Approximate Damping Model for Two-Phase Cross-Flow in Horizontal Tube Bundles," 2007 ASME Pressure Vessel and Piping Division Conference, San Antonio, USA, PVP2007- 26176.
- Sim, W. G. and Mureithi, Njuki, W., 2010, "Drag Coefficient and Two-Phase Friction Multiplier On Tube Bundles Subjected to Two-Phase Cross-Flow," ASME 2010 Pressure Vessels & Piping Division / KPVP Conference, Bellevue, Washington, USA, PVP2010-25073.
- Martinelli, R. C. and Nelson, D. B., 1948, "Prediction of Pressure Drop During Forced Circulation Boiling of Water," Transactions of ASME, 70, pp. 695-702.
- Levy, S., 1960, "Steam Slip-Theoretical Prediction from Momentum Model," Trans. ASME, series C, J. Heat Transfer, 82, pp. 113-124. https://doi.org/10.1115/1.3679890