References
- Cho, J. U., Min, B. S., Han, M. S., 2009, Impact Analysis According to Material of Hand Phone, J. Korean Soc. Manu. Proc. Eng., 8:2 69-75.
- Kim, J. G., Lee, J. Y., Lee, S. Y., 2001, Drop/Impact Simulation and Experimental Verification of MobilePhone, Trans. Korean Soc. Mech. Eng., 25:4 695-702.
- Joung, J. H., Kim, H. B. R., Seong, Y. H.., 2007, A Study on Strength Evaluation of LCD Glass for Drop Test, J. Korean Soc. Prec. Eng., 24:10 99-108.
- Lee, B. H., Kim, K. Y., Kang, H. M.., 2011, A Study on the Reducing Impacts Effect of Rubber in Mobile Display by using Drop Test and FE Analysis, Korean Soc. Mech. Eng. Fall Conference, 1277-1282.
- Park, S. H., Lee, B. Y., Earmme, Y. Y., 2000, Analysis on the Fracture of a Panel Glass in a Liquid Crystal Display Module under Mechanical Shock, J. Korean Soc. Prec. Eng., 17:12 76-81.
- Kang, D. H., Seo, M. Y., Gimm, H. I., Kim, T. W., 2009, Determination of Shock Absorption Performance and Shear Modulus of Rubbers by Drop Impact Test, Trans. Korean Soc. Mech. Eng., 33:4 321-328. https://doi.org/10.3795/KSME-A.2009.33.4.321
- Kim, S. W., Heo, Y., Ha, Y. W., Park, W. K., 2007, A Research about Polymer Material and Process Condition for Slim Cell Phone, Korean Soc. Manu. Tech. Eng. Spring Conference, 727-732.
- Lee, S. M., Kim, B. S., Song, J. H., Lee, S. H., Lee, H. J., Lee, M. G., Song, J. Y., Lee, C. W., 2008, Impact Analysis on Auto Focusing Actuator for Cellular Camera Phone, Korean Soc. Manu. Tech. Eng. Spring Conference, 79-85.
- Sung, Y. W., Lee, M. G., Park, K.S., 2011, Residual Stress Analysis after Impact for Auto Focusing Camera Module of Portable Electronics Devices, Korean Soc. Manu. Tech. Eng. Spring Conference, 174-175.
- Lee, S. M., Kim, B. S., Song, J. H., Lee, S. H., Lee, M. G., 2007, Illustrating the Drop test of the Auto Focusing Actuator for Cellular Phone using a Finite Element Analysis, Korean Soc. Mech. Eng. Fall Conference, 16-21.
- Taesung Software and Engineering Inc.. 2011, Ansys Workbench Training Manual - WB Explicit STR, Taesung Software and Engineering Inc..
Cited by
- Design Improvement of a Water Nozzle in a Demolition Water Vehicle vol.28, pp.1, 2013, https://doi.org/10.7735/ksmte.2019.28.1.48
- Design of the Impact Test Device and Evaluation of Impact Characteristics of Safety Helmet vol.30, pp.2, 2021, https://doi.org/10.7735/ksmte.2021.30.2.155