대한금속재료학회지 (Korean Journal of Metals and Materials)

  • 제50권3호
  • /
  • Pages.237-242
  • /
  • 2012
  • /
  • 1738-8228(pISSN)
  • /
  • 2288-8241(eISSN)
대한금속재료학회 (The Korean Institute of Metals and Materials)
권호 표지
DOI QR코드

DOI QR Code

첨가제에 의한 구리 박막의 기계적 특성 변화

The Influence of Additives on the Mechanical Properties of Electrodeposited Copper Foils

  • 우태규 (전북대학교 공과대학 신소재공학부) ;
  • 박일송 (전북대학교 공과대학 신소재공학부) ;
  • 정광희 (전북대학교 공과대학 신소재공학부) ;
  • 손규송 (전북대학교 공과대학 신소재공학부) ;
  • 송람 (전북대학교 공과대학 신소재공학부) ;
  • 이만형 (전북대학교 공과대학 신소재공학부) ;
  • 황영규 (칼릭스전자화학(주)) ;
  • 설경원 (전북대학교 공과대학 신소재공학부)
  • Woo, Tae-Gyu (Division of Advanced Materials Engineering, College of Engineering, Chonbuk National University) ;
  • Park, Il-Song (Division of Advanced Materials Engineering, College of Engineering, Chonbuk National University) ;
  • Jung, Kwang-Hee (Division of Advanced Materials Engineering, College of Engineering, Chonbuk National University) ;
  • Son, Kyu-Song (Division of Advanced Materials Engineering, College of Engineering, Chonbuk National University) ;
  • Song, Ram (Division of Advanced Materials Engineering, College of Engineering, Chonbuk National University) ;
  • Lee, Man-Hyung (Division of Advanced Materials Engineering, College of Engineering, Chonbuk National University) ;
  • Hwang, Young-Kyu (Calix Electronic chemical Co., Ltd.) ;
  • Seol, Kyeong-Won (Division of Advanced Materials Engineering, College of Engineering, Chonbuk National University)
  • 투고 : 2011.09.19
  • 발행 : 2012.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

The objective of this study is to investigate the effect of additives on the mechanical and electrical characteristics of electrodeposited copper foils. Additives A(leveler) and B(brightener) were used in this study and Cl ions were used as an accelerator. In case of using these additives A and B, it showed a disadvantage that decreased the elongation of electrodeposited layer due to decreased grain sizes and increased tensile strength. On the other hand, the Cl ions decreased the specific resistance of the copper layer and increased elongation owing to increasing grain sizes. The highest elongation and lowest resistivity were measured in the group added only Cl ions, whose values were 21.9% and $3.11{\mu}\Omega$-cm, respectively.

키워드

참고문헌

  1. D. Y. Shin, D. Y. Park, and B. K. Koo, J. Kor. Inst. Surf. Eng. 42, 145 (2009). https://doi.org/10.5695/JKISE.2009.42.4.145
  2. C. C. Hu and C. M. Wu, Surf. Coat. Tech. 176, 75 (2003). https://doi.org/10.1016/S0257-8972(03)00004-5
  3. V. S. Donepudi, R. Venkatachalapathy, P. O. Ozemoyah, C. S. Johnson, and J. Prakash, Electrochem. Solid-State. Lett. C13, 4 (2001).
  4. A. Kudelski, M. J. Czachor, J. Bukowska, M. Dolata, and A. Szummer, J. Mol. Struct. 483, 245 (1999).
  5. A. I. Danilov, J. E. T. Andersen, E. B. Molodkina, Yu. M. Polukarov, P. Moller, and J. Ulstrup., Electrochim. Acta. 43, 733 (1997). https://doi.org/10.1016/S0013-4686(97)00203-X
  6. N. Ikemiya, S. Miyaoko, and S. Hara, Surf. Sci. 327, 261 (1995). https://doi.org/10.1016/0039-6028(94)00844-2
  7. A. J. B. Dutra and T. J. O'keefe, J. Appl. Electrochem. 29, 1217 (1999). https://doi.org/10.1023/A:1003537318303
  8. Y. K. Lee and T. J. O'keefe, JOM April, 40 (2002).
  9. P. Stantke, JOM April, 19 (2002).
  10. J. H. Kim, Master thesis, pp. 9-15, Seoul national university, Seoul (2007).
  11. T. S. Kuan, C. K. Inoki, G. S. Oehrlein, K. Rose, Y. P. Zhao, G. C. Wang, S. M. Rossnagel, and C. Cabral, Mater. Res. Soc. Symp. Proc. 612, D7.1.1 (2000).
  12. V. DeNora, Met. Ital. 31, 67 (1939).
  13. L. L. Shreir and J. W. Smith, J. Electrochem. Soc. 99, 450 (1952). https://doi.org/10.1149/1.2779627
  14. A. Butts and V. DeNora, Trans. Electrochem. Soc. 79, 163 (1941). https://doi.org/10.1149/1.3071269
  15. M. H. Kim, H. R. Cha, C. S. Choi, J. M. Kim, and D. Y. Lee, Korean J. Met. Mater. 48, 884 (2010). https://doi.org/10.3365/KJMM.2010.48.10.884
  16. B. D. Cullity and S. R. Stock, Elements of X-ray diffraction, third ed., p.170, Pearson Education, New Jersey (2001).
  17. S. H. Lee and N. J. Park, J. Kor. Inst. Met. & Mater. 44, 556 (2006).