초록
본 연구의 목적은 형상계수와 태양추적장치를 이용하여 헬리오스타트에서 흡수기로 복사열전달이 최대화 될 수 있는 시스템을 개발하는 것이다. 헬리오스타트에서 타워 상단에 위치한 흡수기로의 열전달은 대부분 복사에 의해 일어나기 때문에, 복사 열전달에서 사용되는 형상계수를 헬리오스타트 제어에 이용하였다. 태양 추적 및 태양 위치 계산은 CdS 센서와 시뮬링크 프로그램을 이용하였다. 시뮬링크 프로그램을 이용하여 실시간으로 헬리오스타트, 흡수기, 태양 사이의 형상계수가 최대화되는 알고리즘을 적용함으로서, 헬리오스타트에서 흡수기로의 복사 열전달이 최대화 될 수 있도록 하였다. 또한 다양한 조건에 따른 헬리오스타트 제어에 필요한 각을 시뮬레이션 함으로서 각 조건에 필요한 각을 도출할 수 있었다.
This study aims to develop a system that maximizes the radiative heat transfer from the heliostat to the receiver by using the configuration factor and a solar tracking device. As the heat transfer from the heliostat to the receiver is delivered by solar radiation, the configuration factor commonly utilized for radiation is applied to control the heliostat. Tracking the sun and calculating its position are possible by using an illuminance sensor (CdS) and Simulink. By applying optimized algorithms programmed using Simulink that maximize the configuration factors among the heliostat, receiver, and sun in real time, the solar absorption efficiency of the receiver can be maximized. Simulations were performed on how to change the angle required to control the elevation and azimuthal angle of the heliostat during the daytime with respect to various distances.