References
- P.L. Dowell, "Effects of eddy currents in transformer windings", Proc. of the IEEE, Vol. 113, pp. 1387-1394, Aug. 1966.
- M. P. Perry, "Multiple layer series connected winding design for minimum losses," IEEE Trans. Power Electron., Vol. PAS-98, No.1, pp. 116-123, Jan. 1979.
- A.M. Urling, V.A. Niemela, G.R. Skutt, T.G. Wilson, "Characterizing high-frequency effects in transformer windings-a guide to several significant articles," in Proc. IEEE. APEC, pp. 373-385, 1989.
- J. A. Ferreira, "Improved analytical modeling of conductive losses in magnetic components," IEEE Trans. Power Electron., Vol. 9, No. 1, pp. 127-131, Jan. 1994. https://doi.org/10.1109/63.285503
- X. Nan and C. R. Sullivan," An Improved Calculation of Proximity-Effect Loss in High-Frequency Windings of Round Conductors," in Proc. IEEE PESC, pp. 853-860, 2003.
- P. S. Venkatraman, "Winding eddy current losses in switch mode power transformers due to rectangular wave currents," in Proc. of Powercon 11, Sec. A, pp. 1-11, 1984.
- B. Carsten, "High frequency conductor losses in switch mode magnetics," in Proc. High-frequency Power Converter Conf. Record, pp. 155-176, May 1986.
- W. G. Hurley, E. Gath, and J. G. Breslin, "Optimizing the AC resistance of multilayer transformer windings with arbitrary current waveforms," IEEE Trans. Power Electron., Vol. 15, No. 2, pp. 369-376, Mar. 2000. https://doi.org/10.1109/63.838110
- R. Prieto, J.A. Cobos, O.Garcia, P. Alou and J. Uceda, "High frequency resistance in flyback type transformers," in Proc. IEEE APEC, pp. 714-719, 2000.
- D. Lavers, E. Lavers," Waveform Dependent Switching Losses in Flyback Transformer Foil Windings," in Proc. IEEE APEC, pp. 116-112, 2002.
- J. M. Lopera, M. J. Prieto, F. Nuno, A. M. Pernia, and J. Sebastian, "A quick way to determine the optimum layer size and their disposition in magnetic structures," in Proc. IEEE PESC, pp. 1150-1156, 1997.
- C. R. Sullivan, "Computationally efficient winding loss calculation with multiple windings, arbitrary waveforms, and two- or three dimensional field geometry," IEEE Trans. Power Electron., Vol. 16, No. 1, pp.142-150, Jan. 2001. https://doi.org/10.1109/63.903999
- C. R. Sullivan, T. Abdallah, "Optimization of a flyback transformer winding considering two-dimensional field effects, cost and loss," in Proc. IEEE APEC, pp. 1-7, 2001.
- J. H. Spreen, "Electrical terminal representation of conductor loss in transformers", IEEE Trans. Power Electron., Vol. 5, No. 4, pp. 424-429, Oct.1990. https://doi.org/10.1109/63.60685
- J. Vandelac and P. D. Ziogas, "A novel approach for minimizing high frequency transformer copper losses," IEEE Trans. Power Electron., Vol.3, No. 3, pp. 166-176, Jul. 1988. https://doi.org/10.1109/59.43194
- Z. Y. Lu and W. Chen "Novel Winding Loss Analytical Model of Flyback Transformer," in Proc. IEEE PESC, pp.1213-1218, 2006.
- Rudy Severns, "Additional losses in high frequency magnetics due to non ideal field distributions", in Proc. IEEE APEC., pp. 333-338, 1992
- P. Wallmeier, N. Frohleke, and H. Grotstollen, "Improved analytical modeling of conductive losses in gapped high-frequency inductors", IEEE Trans. Ind. Appl., Vol. 37, No. 4, pp. 558-567, Jul. 2001.
- Jiankun Hu and C. R. Sullivan, "AC resistance of planar power inductors and the quasi-distributed gap technique", IEEE Trans. Power Electron., Vol. 16, No. 4, pp. 558-567, Jul. 2001. https://doi.org/10.1109/63.931082
- W. Chen, J. He, H. L. Luo, H. Hu, and C. Wen, "Winding loss analysis and new air-gap arrangement for high-frequency inductor," in Proc. IEEE PESC, pp. 2084-2089, 2001.
- X. K. Mao, W. Chen, and Y. X. Li, "Winding Loss Mechanism Analysis and Design for New Structure High-Frequency Gapped Inductor," IEEE Trans. Magnetics, Vol.41, No. 10, pp. 4036-4038, Oct 2005. https://doi.org/10.1109/TMAG.2005.854991
- F. Robert, "A Theoretical Discussion About the Layer Copper Factor Used in Winding Losses Calculation," IEEE Trans. Magnetics, Vol. 38, No. 5, pp. 3177-3179, Sep. 2002. https://doi.org/10.1109/TMAG.2002.802406
- W. A. Roshen, "Fringing field formulas and winding loss due to an air gap," IEEE Trans. Magnetics, Vol. 43, No. 8, pp. 3387-3394, Aug. 2007. https://doi.org/10.1109/TMAG.2007.898908
- T. Komma and H. Gueldner, "The effect of different air-gap positions on the winding losses of modern planar ferrite cores in switch mode power supplies," in Proc. SPEEDAM, pp.632-637, 2008.
- P. Wallmeier, N. Frohleke, and H. Grotstollen, "Automated optimization of high frequency inductors," in Proc. IEEE IECON, pp. 342-347, 1998.
- P. Wallmeier and H. Grotstollen, "Magnetic shielding applied to high frequency inductors," in Proc. IEEE IAS, pp.1131-1138, 1997
- E. C. Snelling, Soft Ferrites: Properties and Applications, 2nd ed. London, U.K.: Butterworth, 1988.
- D. Murthy-Bellur and M. K. Kazimierczuk, "Winding losses caused by harmonics in high frequency transformers for pulse-width modulated DC-DC converters in discontinuous conduction mode," IET Power Electronics, Vol. 3, No.5, pp. 804-817, Sep. 2010. https://doi.org/10.1049/iet-pel.2009.0289
- D. Murthy-Bellur, N. Kondrath, and M. K. Kazimierczuk, "Transformer winding loss caused by skin and proximity effects including harmonics in PWM DC-DC flyback converter for continuous conduction mode," IET Power Electronics, Vol. 4, No. 4, pp. 363-373, Apr. 2011. https://doi.org/10.1049/iet-pel.2010.0040
- D. A. Nagarajan, D. Murthy-Bellur, and M. K. Kazimierczuk, "Harmonic winding losses in the transformer of a forward pulse width modulated dc-dc converter for continuous conduction mode," IET Power Electronics, Vol. 5, No. 2, pp. 221-236, Feb. 2012. https://doi.org/10.1049/iet-pel.2011.0017
Cited by
- Semi-Numerical Method for Calculation of Loss in Foil Windings Exposed to an Air-Gap Field vol.4, pp.4, 2015, https://doi.org/10.1541/ieejjia.4.301