한국수소및신에너지학회논문집 (Journal of Hydrogen and New Energy)

  • 제23권5호
  • /
  • Pages.455-460
  • /
  • 2012
  • /
  • 1738-7264(pISSN)
  • /
  • 2288-7407(eISSN)
한국수소및신에너지학회 (The Korean Hydrogen and New Energy Society)
권호 표지
DOI QR코드

DOI QR Code

수소화기상증착공정을 이용한 마그네슘하이드라이드 미세분말 합성

Synthesis of Sub-Micron MgH2 using Hydriding Thermal Chemical Vapor Synthesis

  • 강태희 (한국세라믹기술원 이천분원) ;
  • 김진호 (한국세라믹기술원 이천분원) ;
  • 한규성 (한국세라믹기술원 이천분원) ;
  • 김병관 ((주)한국에너지재료)
  • Kang, Taehee (Korea Institute of Ceramic Engineering & Techology) ;
  • Kim, Jinho (Korea Institute of Ceramic Engineering & Techology) ;
  • Han, Kyusung (Korea Institute of Ceramic Engineering & Techology) ;
  • Kim, Byunggoan (Korea Energy Materials Co.Ltd.)
  • 투고 : 2012.09.28
  • 심사 : 2012.10.26
  • 발행 : 2012.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This work describes the hydriding chemical vapor synthesis (HCVS) of the $MgH_2$ in a hydrogen atmosphere and the product's hydriding-dehydridng properties. Mg powder was used as a starting material to synthesize $MgH_2$ and uniformly heated to a temperature of $600^{\circ}C$ for Mg vaporization. The effects of hydrogen pressure on the morphology and the composition of HCVS-$MgH_2$ were examined by using X-ray diffraction (XRD) and scanning electron microscopy (SEM). It is clearly seen that after the HCVS process, the particle size of synthesized $MgH_2$ was drastically reduced to the submicron or micrometer-scale and these showed different shapes (needle-like nanofibers and angulated plate) depending on the hydrogen pressure. It was found that after the HCVS process, the $H_2$ desorption temperature of HCVS-$MgH_2$ decreased from 380 to $410^{\circ}C$, and the minimum hydrogen desorption tempreature of HCVS-$MgH_2$ powder with needle-like shape can be obtained. In addition, the enhanced hydrogen storage performance for needle-like $MgH_2$ was achieved during subsequent hydriding-dehydriding cycles.

키워드

참고문헌

  1. M.Y. Song, S.H. Baek and H.R. Park, "Hydriding and Dehydriding Rates of Magnesium-Nickel Alloy Fabricated by Milling under Hydrogen", Trans. of the Korean Hydrogen and New Energy Society Vol. 22, No. 6, pp. 787-793.
  2. X.D. Yao and G.Q. Lu, "Magnesium-based materials for hydrogen storage: recent advances and future persectives", Chin. Sci. Bull, 53, 2008, 2421-2431. https://doi.org/10.1007/s11434-008-0325-2
  3. D.L. Croston, D.M. Grant, G.S. Walker, "The effect of titanium oxide based additives on the dehydrogenation and hydrogenation of milled $MgH_{2}$", J. Alloys Compd., 492, 2010, pp. 251-258. https://doi.org/10.1016/j.jallcom.2009.10.199
  4. H. Gasan, N. Aydinbeyli, O.N. Celik, Y.M. Yaman, "The dependence of the hydrogen desorption temperature of $MgH_{2}$ on its structural and morphological characteristics", J. Alloys Compd., 4897, 2009, pp. 724-729.
  5. K.G. Kim, Y.S. Kim and T.H. Hong, "Hydrogenation Properties on MgHx-Sc2O3 Composites by Mechanical Alloying", Trans. of the Korean Hydrogen and New Energy Society Vol. 21, No. 2, pp. 81-88.
  6. O. Freedrichs, L. Kolodziejczyk, J.C. Sanchez-Lopez, C. Lopez-Cartes and A. Fernandez, "Synthesis of nanocrystalline $MgH_{2}$ powder by gas-phase condensation and in situ hydridation: TEM, XPS and XRD study", J. Alloys Compd., 434-435, 2007, pp. 721-724. https://doi.org/10.1016/j.jallcom.2006.08.286
  7. W. Li, C. Li, H. Ma and J. Chen, "Magneium nanowires: Enhanced kinetics for hydrogen absorption and desorption", J. Am. Chem. Soc., 129, 2007, pp. 6710-6711. https://doi.org/10.1021/ja071323z
  8. Y.J. Choi, J.W. Choi, H.Y. Sohn, T. Ryu, K.S. Hwang and Z.Z. Fang, "Chemical vapor synthesis of Mg-Ti nanopowder mixture as a hydrogen storage material", Int. J. Hydrogen Energy, 34, 2009, pp. 7700-7706. https://doi.org/10.1016/j.ijhydene.2009.07.033
  9. C. Zhu, H. Hayashi, I. Saita and T. Akiyama, "Direct synthesis of $MgH_{2}$ nanofibers at different hydrogen pressures", Int. J. Hydrogen Energy, 34, 2009, pp. 7283-7290. https://doi.org/10.1016/j.ijhydene.2009.06.080
  10. I. Saita, T. Toshima, S. Tanda and T. Akiyama, "Hydrogen storage of $MgH_{2}$ synthesized by hydriding chermical vapor deposition", J. Alloys Compd., 446-447, 2007, pp. 80-83. https://doi.org/10.1016/j.jallcom.2007.04.020