DOI QR코드

DOI QR Code

임계지역 석회암의 일축압축강도와 점하중강도지수의 상관관계 연구

A Study on the Correlation between Uniaxial Compressive Strength and Point Load Strength Index of Limestone of Imgye Area

  • 김경만 (강원대학교 에너지.자원공학과 대학원) ;
  • 김대훈 (강원대학교 에너지.자원공학과 대학원) ;
  • 강중석 (한국지질자원연구원 광물자원연구본부) ;
  • 강상수 (한국지질자원연구원 광물자원연구본부) ;
  • 백환조 (강원대학교 에너지.자원공학과 대학원)
  • 투고 : 2012.09.20
  • 심사 : 2012.10.08
  • 발행 : 2012.10.31

초록

일축압축강도(UCS)는 암석의 주요 물성 중 하나이다. 그러나 항상 UCS 실험을 위한 시료를 취득할 수는 없다. 이러한 경우 점하중시험과 같은 간접시험법이 유용한 대안이 될 수 있다. 본 연구에서는 임계지역에 분포하는 석회암을 대상으로 일축압축강도와 점하중강도지수 사이의 상관관계를 분석하였으며 선형 회귀식이 제안되었다. 또한 석회암을 대상으로 수행된 이전 연구결과와 이번 연구 결과를 비교하였다. 동일한 암종이라도 국내에서 분포하는 지역에 따라 변환계수가 다를 수 있으며, 분석의 정확성을 높이기 위해서는 더 많은 자료가 필요할 것으로 판단된다.

Though the uniaxial compressive strength (UCS) of rock material is one of the key properties for rockmass characterization purposes, core samples for the test cannot always be obtained from the field. Indirect tests such as the point load test (PLT) can be a useful alternative. In this study, correlation between the UCS and the point load strength index of limestone of Imgye area was analyzed, and the linear regression equation obtained from regression analysis of two variables was suggested. The results of this study were also compared with previous studies on limestone. It was suggested that conversion factors for the same rock type from diverse areas in Korea may have different values, and more data should be obtained to increase the accuracy of regression analysis.

키워드

참고문헌

  1. ASTM, 1986a. Standard test method of unconfined compressive strength of intact rock core specimens. D2938.
  2. Basu, A. and Aydin, A., 2006, Predicting uniaxial compressive strength by point load test: significance of cone penetration, Rock Mech. Rock Eng. 39.5, 483-490. https://doi.org/10.1007/s00603-006-0082-y
  3. Bell F. G., 1995, Laboratory testing of rocks. In: Bell FG (ed) Engineering in rock masses. Butterworth-Heinemann, Oxford, 151-169.
  4. Bieniawski, Z. T., 1975, The point load test in geotechnical practice, Eng. Geol. 9, 1-11. https://doi.org/10.1016/0013-7952(75)90024-1
  5. Broch, E. M. and Franklin, J. A., 1972, The point load strength test, Int. J. Rock Mech. Min. Sci. 9, 669-697. https://doi.org/10.1016/0148-9062(72)90030-7
  6. Cha, A R., Song, J. H., Choi, H. S. and Chun, B. S., 2007, The study on the correlation between unconfined compressive strength and point load strength within the geniss complex in Gyunggi province, Journal of the Korean Geo-Environmental Society 8.1, 21-16.
  7. Diamantis, K., Gartzos, E. and Migiros, G., 2009, Study on uniaxial compressive strength, point load strength index, dynamic and physical properties of serpentinites from central Greece: test results and empirical relations, Eng. Geol. 108, 199-207. https://doi.org/10.1016/j.enggeo.2009.07.002
  8. Grasso, P., Xu, S. and Mahtab, A., 1992, Problems and promises of index testing of rocks. Proc. 33rd US Symp. Rock Mech., Sante Fe, NM, Balkema, Rotterdam, 3-5 June 1992, 879-888.
  9. Hawkins, A. B., 1998, Aspects of rock strength, Bull. Eng. Geol. Env. 57, 17-30. https://doi.org/10.1007/s100640050017
  10. ISRM, 2007, The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974-2006. In: Ulusay, Hudson (Eds.), Suggested methods prepared by the commission on testing methods, International Society for Rock Mechanics. ISRM Turkish National Group, Ankara, Turkey. 628 pp.
  11. Jung, C. K., Lee, D. Y., Ryu, Y. S. and Kang, K. W., 1979, Geological report of the Pyeongchang.Yeongwol sheets, Korea Institute of Geology, Mining and Materials.
  12. Kang, S. S., Lee, H. J., Kang, C. W. and Kim, C. B., 2005, Physical and mechanical properties of volcanic glass in the Samho area, South Korea, Tunnel & Underground Space (Journal of Korean Society for Rock Mechanics) 15.3, 223-227.
  13. Kim, H. G., Koh, Y. K. and Oh. K. H., 2004, A study on the mechanical properties of the cretaceous tuffs in Goheung area, The Journal of Engineering Geology 14.3, 273-285.
  14. Kohno, M. and Maeda, H., 2012, Relationship point load strength index and uniaxial compressive strength of hydrothermally altered soft rocks, Int. J. Rock Mech. Min. Sci. 50, 147-157. https://doi.org/10.1016/j.ijrmms.2012.01.011
  15. KSRM, 2005a, Standard method for sampling and preparation of rock test specimen, Tunnel & Underground Space (Journal of Korean Society for Rock Mechanics) 15.2, 81-84.
  16. KSRM, 2005b, Standard test method for uniaxial compressive strength of rock, Tunnel & Underground Space (Journal of Korean Society for Rock Mechanics) 15.2, 81-84.
  17. KSRM, 2007, Standard test method for point load strength of rock, Tunnel & Underground Space (Journal of Korean Society for Rock Mechanics) 17.2, 75-82.
  18. Lashkaripour, S., 2001, Evaluation of simple methods for assessing the uniaxial compressive strength of rock, Int. J. Rock Mech. Min. Sci. 38, 98-994.
  19. Lee, C., K., Chang, S. M., Lee, S., G. and Son, K. C., 2003, A study on strength anisotropy characteristic and suggested methods for determining RQD as for shale, Proceedings of the Korean Society for Rock Mechanics Conference, Mar. 2003, 173-180.
  20. Lee, D. J., Kim, Y. W., Kim, D. U., Yoo, J. H., Hong, S. S., Lee, H. J., Choi. C. K. and Lee, J. S., 1993, Survey report of limestone deposit in Uljin, Korea Institute of Geology, Mining and Materials, 2.
  21. Lee, Y. J. and Jung, H. K., 2004, Survey report (limestone, Jeongseon-Imgye area), KORES, 39.
  22. Marinos. P., Koukis, G., Sabatakakis, N. and Tsiambaos, G., 1994, Laboratory testing aspects of Athenian schist. 7th Congress of the Int. Association of Eng. Geol.(IAEG), Lisboa, Portugal, 5-9 Sept., Vol. 2, 975-982.
  23. Min, T. K. and Moon, J. K., 2006, A review of strength estimation method on Ulsan sedimentary rocks, Journal of Korean Geotechnical Society 22.8, 63-75.
  24. No, J. S., 2009, A study on the brazilian strength behavior of Korean rocks, Ph.D. thsis. Univ. of Ulsan, 107-109.
  25. Noh, J. H. and Lee. N. K., 2007, Applied-mineralogical study on the grinding effects and powder properties of high-Ca limestone, Journal of the Korea Society for Geosystem Engineering 44.3, 191-207.
  26. Quane, S. L. and Russel, J. K., 2003, Rock strength as a metric of welding intensity in pyroclastic deposits, Eur. J. Mineral 15, 855-864. https://doi.org/10.1127/0935-1221/2003/0015-0855
  27. Singh, T. N., Ashutosh Kainthola, and Venkatesh A, 2012, Correlation between point load index and uniaxial compressive strength for different rock types, Rock Mech. Rock Eng. 45, 259-264. https://doi.org/10.1007/s00603-011-0192-z
  28. Sabatakakis, N., Tsiambaos, G. and Koukis, G., 1993, Index properties of soft marly rocks of the Athens basin, Greece. Proc. Int. Symp. Geotech. Engin. of Hard Soils and Soft Rocks, Athens, vol 1, 275-279.
  29. Sabatakakis, N., Tsiambaos, G. and Gerochristodoulou, D., 2002, Estimation of physical and mechanical parameters of rock material. Bull. of the public works central laboratory of Gress (KEDE), 3-8. special edition.
  30. Tsiambaos, G. and Sabatakakis, N., 2004, Considerations on strength of intact sedimentary rocks, Eng. Geol. 72, 261-273. https://doi.org/10.1016/j.enggeo.2003.10.001
  31. Won, C. K., Park, B. K. and Lee, S. H., 1994, Geological report of the Samcheok-Gosari sheets, Korea Institute of Geology, Mining and Materials.
  32. Woo, B. S., 2005, Evaluation of uniaxial compressive strength by point load test and hardness test, Master thsis. Andong Nati. Univ., 38-39.