Journal of the Earthquake Engineering Society of Korea (한국지진공학회논문집)

Earthquake Engineering Society of Korea (한국지진공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Static Eccentricities of Buildings Designed by Different Design Eccentricities

설계편심의 크기에 따른 비틀림 비정형 건물의 최종 정적편심 크기의 비교에 관한 연구

  • Received : 2012.06.04
  • Accepted : 2012.09.24
  • Published : 2012.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

To reduce the vulnerability of torsional irregular buildings caused by seismic loads, the torsional amplification factor was introduced by the seismic code. This factor has been applied differently in a variety of seismic codes. In this study, the final static eccentricity, and the lateral and torsional stiffness ratios of buildings designed with different design eccentricities were compared. The increment of the torsional amplification factor resulted in a decrement of the final static eccentricity of the building. However, after reaching the maximum value of this factor, the final static eccentricity of the building increased again. The final static eccentricity of the building designed by multiplying the sum of the inherent and accidental eccentricity by the torsional amplification factor was zero or had a minus value, depending to the position of the vertical element.

지진하중에 의해 발생하는 비정형 건물의 피해를 줄이기 위하여 내진설계기준에서는 비틀림 증폭계수를 도입하였다. 이 계수는 내진설계기준에 따라 다르게 적용되었으며 같은 시기의 설계기준에서조차 다르게 적용되었다. 본 연구에서는 서로 다른 설계편심으로 설계된 건물의 최종 정적편심의 크기, 연약단부의 횡강성과 비틀림 강성비를 비교하였다. 비틀림 증폭계수가 증가할수록 연약단부의 횡강성이 증가하여 건물의 최종 정적편심의 크기는 감소하였으나 이 계수가 최대값 3.0에 도달한 이후부터 건물의 최종 정적편심의 크기는 다시 증가하였다. 우발편심과 정적편심의 합에 비틀림 증폭계수를 곱하여 구한 설계편심으로 설계된 건물의 최종 정적편심의 크기는 수직부재의 위치에 따라 0 또는 음수로 측정되었다.

Keywords

References

  1. 대한건축학회, 건축구조설계기준, 대한건축학회, 106, 2009.
  2. ASCE/SEI 7-10, Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers, 80-92, 2010.
  3. Stefano, M. D. and Rutenberg, A., "A comparison of the present SEAOC/UBC torsional provisions with the old ones," Engineering Structures, V.19, No.8, 655-664, 1997. https://doi.org/10.1016/S0141-0296(96)00142-3
  4. 이명규, 조소훈, "모드 해석을 이용한 등가 지진하중에서의 설계편심," 대한토목학회논문집 A, 제22권, 제6-A호, 1259- 1269, 2002.
  5. 홍성걸, 하태휴, "평면비정형 벽식 구조물의 비탄성 설계변위 산정," 대한건축학회 논문집 구조계, 제23권, 제2호, 51-58, 2007
  6. Federal Emergency Management Agency, NEHRP recommended Seismic provisions for new buildings and other structures, Report FEMA P-750, Washington D.C., 130, 2009.
  7. International Conference of Building Officials, Uniform Building Code, California, USA, 1988.
  8. Structural Engineers Association of California, Recommended lateral force requirements and commentary, San Francisco, 1999.
  9. International Conference of Building Officials, Uniform Building Code, California, USA, 1991.
  10. International Conference of Building Officials, Uniform Building Code, California, USA, 1994.
  11. International Conference of Building Officials, Uniform Building Code, California, USA, 2-15, 1997.
  12. Federal Emergency Management Agency, NEHRP guidelines for the seismic rehabilitation of buildings, Report FEMA 273, Washington D.C., 3-2, 1997.
  13. Federal Emergency Management Agency, NEHRP recommended provisions for seismic regulations for new buildings and other structures, Report FEMA 302, Washington D.C., 66, 1997.
  14. Structural Engineers Association of California, Recommended lateral force requirements and commentary, San Francisco, 13; 112; 121, 1999.
  15. Federal Emergency Management Agency, Prestandard and commentary for the seismic rehabilitation of buildings, Report FEMA 356, Washington D.C., 3-3, 2000.
  16. Federal Emergency Management Agency, NEHRP recommended provisions for seismic regulations for new buildings and other structures, Report FEMA 368, Washington D.C., 76, 2000.
  17. ASCE/SEI 7-02, Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers, 148, 2002.
  18. Federal Emergency Management Agency, NEHRP recommended provisions for seismic regulations for new buildings and other structures, Report FEMA 450, Washington D.C., 90, 2003.
  19. ASCE/SEI 7-05, Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers, 214; 130, 2006.
  20. 대한건축학회, 건축구조설계기준, 대한건축학회, 121, 2006.

Cited by

  1. A Study on the Relationship between Earthquake Damage and the Design Eccentricity of Building with Planar Irregularity vol.17, pp.5, 2013, https://doi.org/10.5000/EESK.2013.17.5.237