Journal of the Society of Naval Architects of Korea (대한조선학회논문집)

The Society of Naval Architects of Korea (대한조선학회)
권호 표지
DOI QR코드

DOI QR Code

Improvement of Submarine Cooling System using HILS Simulation

HILS 기반의 수중체 냉각 시스템 개선

  • 정성영 (수중운동체 특화연구센터) ;
  • 오진석 (한국해양대학교 기관공학부)
  • Received : 2011.08.12
  • Accepted : 2012.08.27
  • Published : 2012.10.20
Download PDF
⟨ Previous Next ⟩

Abstract

Owing to rapid development of power device and inverters, most of submarines adopt an eletric propulsion system. Although PMPM(Permanent Magnet Propulsion Motor) propulsion system has relatively higher power, energy conversion efficiency and smaller volume than engine propulsion system, it also produces large amount of heat due to current flowing inside motor coils and change of magnetic field induced by iron core. The produced heat in stator and inverter largely affects motor efficiency and bearing lubrication and causes thermal aging while the system is on operation. So, we analyze the existing cooling system and submarine ESS (Energy Saving System) cooling system whose power consumption is reduced. HILS(Hardware In the Loop System) technique is used for the modelling of the submarine cooling system. To confirm the ESS cooling system characteristic, HILS is simulated using LabVIEW with hardware. As a result, the ESS cooling system has the characteristic of better temperature stability and less power consumption than the existing one.

Keywords

References

  1. Kim, D.S. et al., 2005. A Study on Revolving Characteristics According to Stator Shape in 5MW Class Brushless DC Motor for Ship Propulsion. In: The Korean Institute of Electrical Engineers, Electrical Machinery and Energy Conversion System Society, Republic of Korea, 20-22 October 2005.
  2. Lee, H.S. et al., 2004. Development of Digital Governor by HILS System for a Small Diesel Engine. In: The Korean Society for Power System Engineering, The 2004 Autumn Conference, Republic of Korea, 28-29 May 2004, pp.40-45.
  3. Lim, J.S., 2007. MATLAB 7 by Lim Jong-soo. Republic of Korea.
  4. M.LACHI, N.EL WAKIL & JPADET, 1997. The Time Constant of Double Pipe and One Pass Shell-and-Tube Heat Exchangers in the Case of Varying Fluid Flow Rates. International Journal of Heat and Mass Transfer, 40(9), pp.2067-2079. https://doi.org/10.1016/S0017-9310(96)00274-8
  5. Oh, J.S. & Lim, M.K., 2004. A Study on the Method of Energy Saving in a Marine Cooling System. Journal of the Korean Society of Marine Engineering, 29(5), pp.127-132.
  6. Oh, J.S. Jo, K.J. Kwak, J.H. & Lee, J.Y., 2008. Analysis & Design of Cooling System for Electric Propulsion System. Journal of the Korean Society of Marine Engineering, 32(4), pp.596-602. https://doi.org/10.5916/jkosme.2008.32.4.596
  7. Oh, J.S. et al., 2010. Control Algorithm Development for Design of Cooling System in High-power Propulsion Motor. Journal of the Korean Society of Marine Engineering, 34(1), pp.195-201. https://doi.org/10.5916/jkosme.2010.34.1.195
  8. You, J.S., 1998. A Study on Design Program for a Multipass Plate Heat Exchanger with $\varepsilon$-NTU method. M.D. Seoul: Konkuk University.