DOI QR코드

DOI QR Code

Metallic Crack Detections by Planar Inductive Coil Sensor Under AC and DC Magnetic Fields

  • Received : 2012.05.28
  • Accepted : 2012.06.25
  • Published : 2012.09.30

Abstract

To detect the surface and the opposite side cracks on iron specimen under AC and DC magnetic fields, the planar inductive coil sensors were employed. When the induced signals were measured, the planar inductive coil sensor and the magnetic field source were lifted off about 2 mm from the top surface of the specimen. AC magnetic fields and DC magnetic fields were applied to the specimens by single straight Cu coil and NdFeB permanent magnet, respectively. The detected signals at crack positions were good coincidence with those of the simulation results.

Keywords

References

  1. O. Hesse and S. Pankratyev, Meas. Sci. Rev. 5, 86 (2005).
  2. Yu-Jung Cha, Baekil Nam, Jongryoul Kim, and Ki Hyeon Kim, Sens. Actuators: A 162, 13 (2010). https://doi.org/10.1016/j.sna.2010.06.003
  3. S. Tumanski, Meas. Sci. Technol. 18, R31 (2007). https://doi.org/10.1088/0957-0233/18/3/R01
  4. C. Cavoit, Rev. Sci. Instrum. 77, 064703 (2006). https://doi.org/10.1063/1.2214693
  5. O. Hesse and S. Pankratyev, Meas. Sci. Rev. 5, 86 (2005).
  6. S.-H. Yoon, S.-W. Lee, Y.-H. Lee, and J.-S. Oh, Sensors 6, 712 (2006). https://doi.org/10.3390/s6070712
  7. A. Jander, C. Smith, and R. Schneider, Proc. 10th SPIE International Symposium Nondestructive Evaluation for Health Monitoring and Diagnostics Conference 5770, 1 (2005).
  8. R. J. Prance, T. D. Clark, and H. Prance, Encyclopedia of Sensors 10, 1 (2006).

Cited by

  1. Estimation of Depth and Length of Defects from Magnetic Flux Leakage Measurements: Verification with Simulations, Experiments, and Pigging data pp.1941-0069, 2017, https://doi.org/10.1109/TMAG.2016.2631525