대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제36권10호
  • /
  • Pages.1261-1266
  • /
  • 2012
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

탄소섬유/에폭시 복합재의 기계적 특성에 미치는 염수환경의 열습 영향

Hygrothermal Effect of Salt-Water Environments on Mechanical Properties of Carbon/Epoxy Composites

  • 황영은 (금오공과대학교 기계공학과) ;
  • 윤성호 (금오공과대학교 기계공학과)
  • Hwang, Young-Eun (Dept. of Mechanical Engineering, Kumoh Nat'l Institute of Technology) ;
  • Yoon, Sung-Ho (Dept. of Mechanical Engineering, Kumoh Nat'l Institute of Technology)
  • 투고 : 2012.03.02
  • 심사 : 2012.06.11
  • 발행 : 2012.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 최대 12개월 동안 염수침수시험을 수행하여 염수환경의 열습조건이 복합재의 특성에 미치는 영향을 조사하였다. 복합재 시편은 직물 형태의 탄소섬유와 에폭시로 구성된 프리프레그를 적층하여 제작하였으며, 노출온도 $35^{\circ}C$, $55^{\circ}C$, $75^{\circ}C$가 적용된 염수환경에 완전 침수시키는 조건을 적용하였다. 연구결과에 따르면 복합재의 인장강성과 인장강도는 노출온도와 노출시간이 증가할수록 노출전에 비해 감소 정도가 크지 않았지만 이에 비해 압축강성과 압축강도는 감소 정도가 크게 나타났다. 특히 압축강도는 노출온도가 증가할수록 염수침투가 가속화되어 감소 정도가 크게 나타났다.

In this study, salt-water immersion tests were experimentally performed for up to 12 months to investigate the hygrothermal effect of salt-water environments on the mechanical properties of carbon/epoxy composites. The composites were manufactured by laminating prepregs composed of carbon plain-woven fabric and epoxy resin. The specimens were subjected to temperatures of 35, 55, and $75^{\circ}C$ while being exposed to the salt-water environments. Mechanical test results showed that the tensile modulus and tensile strength decreased at a small rate, and the compressive modulus and compressive strength decreased at a relatively larger rate, as the exposure temperature and time increased. The rate of decrease in compressive strength became larger as the exposure temperature became higher. This is because a higher environmental temperature accelerates the salt-water uptake; this, in turn, reduces the compressive strength more rapidly.

키워드

참고문헌

  1. Smith, C. S., 1990, Design of Marine Structures in Composite Materials, Elsevier Applied Science, London.
  2. Kootsookos, A. and Mouritz, A. P., 2004, "Seawater Durability of Glass- and Carbon-Polymer Composites," Composites Science and Technology, Vol. 64, No. 10-11, pp. 1503-1511. https://doi.org/10.1016/j.compscitech.2003.10.019
  3. Wu, L., Murphy, K., Karbhari, V. M. and Zhang, J. S., 2002, "Short-Term Effects of Sea Water on E-Glass/Vinylester Composites," Journal of Applied Polymer Science, Vol. 84, No. 14, pp. 2760-2767. https://doi.org/10.1002/app.10571
  4. Gellert, E. P. and Turley, D. M., 1999, "Seawater Immersion Ageing of Glass-Fibre Reinforced Polymer Laminates for Marine Applications," Composites, Part A, Vol. 30, No. 11, pp. 1259-1265. https://doi.org/10.1016/S1359-835X(99)00037-8
  5. Davies, P., MazÉas, F. and Casari, P., 2000, "Sea Water Aging of Glass Reinforced Composites: Shear Behaviour and Damage Modelling," Journal of Composite Materials, Vol. 35, No. 15, pp. 1343-1372.
  6. Yoon, S. H., 2005, "Evaluation of Durability for Glass Fabric/Phenolic Composites Under Salt Water Environments," Journal of the Korean Society for Composite Materials, Vol. 18, No. 4, pp. 27-34.
  7. Bradley, W. L. and Grant, T. S., 1995, "The Effect of the Moisture Absorption on the Interfacial Strength of Polymeric Matrix Composites," Journal of Materials Science, Vol. 30, No. 21, pp. 5537-5542. https://doi.org/10.1007/BF00351570
  8. Gautiera, L., Mortaignea, B. and Bellenger, V., 1999, "Interface Damage Study of Hydrothermally Aged Glass-Fibre-Reinforced Polyester Composites," Composites Science and Technology, Vol 59, No. 16, pp. 2329-2337. https://doi.org/10.1016/S0266-3538(99)00085-8
  9. Xiao, G. Z. and Shanahan, M. E. R., 1998, "Swelling of DGEBA/DDA Epoxy Resin during Hygrothermal Ageing," Polymer, Vol. 39, No. 14, pp. 3253-3260. https://doi.org/10.1016/S0032-3861(97)10060-X
  10. Bank, L. C., Gentry, T. R. and Barkatt, A., 1995, "Accelerated Test Methods to Determine the Long-Term Behavior of FRP Composite Structures: Environmental Effects," Journal of Reinforced Plastics and Composites, Vol. 14, No. 6, pp. 559-587. https://doi.org/10.1177/073168449501400602
  11. Daly, H. B., Brahim, H. B., Hfaied, H., Harchay, M. and Boukhili, R., 2007., "Investigation of Water Absorption in Pultruded Composites Containing Fillers and Low Profile Additives" Polymer Composites, Vol. 28, No. 3, pp. 355-364. https://doi.org/10.1002/pc.20243
  12. Adams. R. D. and Singh, M. M., 1995, "The Effect of Immersion in Sea Water on the Dynamic Properties of Fibre-Reinforced Flexibilised Epoxy Composites, Composite Structures, Vol. 31, No. 2, pp. 119-127. https://doi.org/10.1016/0263-8223(95)00007-0