한국해양공학회지 (Journal of Ocean Engineering and Technology)

  • 제26권4호
  • /
  • Pages.64-69
  • /
  • 2012
  • /
  • 1225-0767(pISSN)
  • /
  • 2287-6715(eISSN)
한국해양공학회 (Korean Society of Ocean Engineers)
권호 표지
DOI QR코드

DOI QR Code

Laser 용접한 스테인리스강의 용접부위의 부식특성에 관한 평가

Evaluation of Corrosion Property of Welding Zone of Stainless Steel by Laser Welding

  • 문경만 (한국해양대학교 공과대학 조선기자재 공학부) ;
  • 원종필 (한국해양대학교 공과대학 조선기자재 공학부) ;
  • 박동현 (한국해양대학교 공과대학 조선기자재 공학부) ;
  • 김윤해 (한국해양대학교 공과대학 조선기자재 공학부) ;
  • 이명훈 (한국해양대학교 해사대학 기관시스탬공학부) ;
  • 김진경 (한국해양수산연수원 교육연구처)
  • Moon, Kyung-Man (Department of Marine Equipment Engineering, Korea Maritime University) ;
  • Won, Jong-Pil (Department of Marine Equipment Engineering, Korea Maritime University) ;
  • Park, Dong-Hyun (Department of Marine Equipment Engineering, Korea Maritime University) ;
  • Kim, Yun-Hae (Department of Marine Equipment Engineering, Korea Maritime University) ;
  • Lee, Myung-Hoon (Department of Marine System Engineering, Korea Maritime University) ;
  • Kim, Jin-Gyeong (Education and Research Division, Korea Institute of Maritime and Fisheries Technology)
  • 투고 : 2012.06.11
  • 심사 : 2012.08.20
  • 발행 : 2012.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Laser welding was carried out on austenitic 304 (STS 304) and 22 APU stainless steels. In this case, the differences between the corrosion characteristics of the welding zones of the two stainless steels were investigated using electrochemical methods. The Vickers hardness values of the weld metal (WM) zones in both cases, the STS 304 and 22 APU stainless steels, showed relatively higher values than those of other welding zones. The corrosion current densities of the heat affected zone (HAZ) of the 22 APU and the base metal (BM) zone of the STS 304 exhibited the highest values compared to the other welding zones. It is generally accepted that when STS 304 stainless steel is welded using a general welding method, intergranular corrosion is often observed at the grain boundary because of its chromium depletion area. However, when laser welding was performed on both the STS 304 and 22 APU stainless steels, no intergranular corrosion was observed at any of the welding zones. Consequently, it is considered that the intergranular corrosion of stainless steel can be controlled with the application of laser welding.

키워드

참고문헌

  1. 김민남, 김복인, 한정동 (2000). "습식수중 용접봉의 기계적 성질 에 관한 연구", 한국해양공학회지, 제14권, 제4호, pp 56-61.
  2. 김복인, 노창석, 정교헌, 김민남 (2001). "피복성분에 의한 수중용접봉의 아크 안정성 개선에 관한 연구", 한국해양공학회지, 제15권, 제4호, pp 75-79.
  3. 김진경, 강명신, 김영식 (2006). "선박용 디젤기관의 주철 부품 보수 용접 특성에 관한 연구", 한국해양공학회지, 제20권, 제2호, pp 41-45.
  4. 신민교 (1987). "기계공작법", 아성출판사, pp 242-245.
  5. 안석환, 정정환, 남기우 (2005). "용접 열사이클 재현에 의한 SS400강 및 STS304강의 특성평가", 한국해양공학회지, 제19권, 제4호, pp 64-71.
  6. 이학렬 (1991). "금속부식공학", 연경문화사, pp 246-247.
  7. 오종인, 김영표, 박호경, 방한서 (2007). "선체구조용 A급 강재의 하이브리드 용접에 대한 열 및 역학적 특성에 관한 연구", 한국해양공학회지, 제21권, 제1호, pp 64-68.
  8. 전대희 (1985). "부식과 방식의 관리", 일중사, pp 294-298.
  9. Bilmes, P.D. Liorente, C.L. Saire Huaman, Gassa L.M. and Gervasi, C.A. (2006). "Microstructure and Pitting Corrosion of 13CrNiMo Weld Metal", Corrosion Science, Vol 48, pp 3261-3270. https://doi.org/10.1016/j.corsci.2005.10.009
  10. Devine, T.M. (1990). "The Mechanism of Sensitization of Austenitic Stainless Steel", Corrosion Science, Vol 30, No 23, pp 135. https://doi.org/10.1016/0010-938X(90)90068-G
  11. Hiroshi, I. (1978). "Study of Weld Decay in SUS 304", Journal of Japanese Welding Society, Vol 47, No 3, pp 153. https://doi.org/10.2207/qjjws1943.47.153
  12. Jang, S.K. and Jeon, J.I. (2006). "Wedability of Al 7075 Alloy According to Different Tools and Welding Conditions by F.S.W.", Journal of the Korean Society of Marine Engineering, Vol 30, No 1, pp 30-41.
  13. Kim, J.D. Kil, B.L. and Lee, C.J. (2006a). "The Weldability of haminated Stator Core for Motor by Pulsed Nd:YAG Laser[I]", Journal of the Korean Society of Marine Engineering, Vol 30, No 5, pp 629-635.
  14. Kim, J.D. Yoo, S.J. and Kim, J.S. (2006b). "Optimization of Pulsed Nd:YAG Laser Welding Conditions for Sealing of Lithium-ion Battery", Journal of the Korean Society of Marine Engineering, Vol 30, No 5, pp 623-628.
  15. Lee, Y.H. Kim, Y.H. and Kim, H. (2003). "Crevice Corrosion Resistance of Stainless Steel in Natural Sea Water with Different Post Welding Treatment", Corrosion Science and Technology, Vol 2, No 5, pp 219-224.
  16. Lo, I.H. Lee, M.C Lim, K.Y Ho, W. Yang, G.C.Y. and Tsai, W.T. (2002). "Effect of Heat Treatment on the Pitting Corrosion Behavior of 347SS Weld Overlay", Corrosion Science and Technology, Vol 31, No 5, pp 361-367.
  17. Moon, K.M. Lee, M.H. Kim, K.J. Kim, J.G. and Kim, S.J. (2003). "A Study on the Post-Weld Heat Treatment Effect to Mechanical Properties and Hydrogen Embrittlement for Heating Affected Zone of a RE36 Steel", Corrosion Science and Technology, Vol 2, No 6, pp 283-288.
  18. Nobuo, F. (1964). "Effect of Thermal Cycles on Corrosion Resistance in a Type 304 Stainless Steel", Journal of Japanese Welding Society, Vol 33, No 1, pp 55. https://doi.org/10.2207/qjjws1943.33.55
  19. Raja, V.S. Vershney, S.K. Raman, R. and Kulkarni, S.D. (1998). "Influence of Nitrogen on the Pitting Corrosion Behavior of 904L Weld Clad", Corrosion Science, Vol 40, No 10, pp 1609-1625. https://doi.org/10.1016/S0010-938X(97)00174-1
  20. Tsay, L.W. Lin, W.L. Chenct S.W. and Leu G.S. (1997). "Hydrogen Sulphide Stress Corrosion Cracking of 2.25 Cr-Mo Steel Weldments", Corrosion Science, Vol 39, No 7, pp 1165-1176. https://doi.org/10.1016/S0010-938X(97)00015-2
  21. Yoshihiko, M. (1972). "Corrosion of Austenitic Stainless Steel Welds", Journal of Japanese Welding Society, Vol 41, No 2, pp 154.