DOI QR코드

DOI QR Code

Formalization of Productivity Metrics for Equipment in Multi-sectioned Road Construction Projects

다(多)공구 도로 공사 현장 장비들의 운영 실태 파악을 위한 생산성 지표 정립에 관한 연구

  • 김홍열 (서울과학기술대학교 건설공학부) ;
  • 구본상 (서울과학기술대학교 건설공학부)
  • Received : 2012.03.30
  • Accepted : 2012.05.21
  • Published : 2012.07.31

Abstract

Large road construction projects are typically partitioned into sections that are then contracted individually to contractors. Each section requires using similar heavy equipment including excavators, dump trucks and pavers, which constitute the highest cost. Normally the equipment is not shared between them, as each contractor wishes to have their equipment readily available. However, such practices result in very low utilization of these equipment. The goal of this research is to develop a programmatic resource sharing system in which contractors can share equipment depending on the changing needs of a multi-sectioned road project. This paper introduces the results of a survey performed to investigate how contractors currently manage the supply and demand of equipment and the equipment that are practical for sharing across a project. More importantly, the paper describes a set of metrics (DPR, nDPR, SDI) needed to quantify the amount of supply/demand variance occurring in each section. The metrics were used on an actual road construction project, and the results show that each section suffers from an imbalance between its monthly planned and actual utilization of equipment. The results also indicate that the sharing of the equipment can lead to potentially large savings as equipment requirements can be met within a project as to short leasing from outside vendors.

도로사업현장의 특징은 인접 공구간 비슷한 공종과 공기를 가지고 유사한 장비 자원을 사용하는 다(多)공구 현장이라는 것이다. 그러나 현재 도로현장들은 각 공구의 개별 기성에 취중한 '칸막이식' 운영에 의해 지속적으로 수급불균형상태가 발생하여 고가의 장비들이 비효율적으로 운영되는 것으로 드러났다. 본 연구에서는 다공구현장 내의 장비들을 적시적소에 공구간 공유하여 전체 사업의 자원 활용도를 높일 수 있는 자원공유시스템을 정립하고자 한다. 본 논문은 그 첫 단계로써 도로사업현장에서 장비의 생산성과 그 운영 실태에 대한 연구내용을 중점적으로 소개한다. 현장의 자원운영실태 파악을 위한 설문을 통해서 다공구 도로현장의 자원공유시스템 도입에 필요한 공유적합자원표를 얻었으며, 다공구 현장의 자원활용도 측정을 위해서는 계획편차(DPR), 정규화계획편차(nDPR), 수급불균형지수(SDI)등의 공식을 새롭게 고안하였다. 이들 공식을 실제 도로현장의 작업일지 데이터에 적용하였으며, 그 결과 각 공구별 nDPR값과 SDI값을 얻었다. 분석결과 도로사업현장의 자원운영은 추가임대와 유휴자원이 계속적으로 발생하는 비효율적인 운영임을 파악하였다. 또한 공구별로 부족/유휴 상태가 골고루 발생하여 공구간 장비를 공유할 경우 상쇄효과를 통해 장비의 생산성이 높아질 것을 간접적으로 파악할 수 있었다. 본 논문에서 도출된 결과들은 추후 자원공유시스템 정립의 기초자료로 활용 가능할 것으로 판단된다.

Keywords

References

  1. 구본상 (2008), "린 건설에 기초한 국내 건설 공사의 시공 계획 신뢰도 평가 및 분석", 대한 토목학회 논문집, 제28권 제5D호, pp.655-664.
  2. 구본상.박희성.장철기.김대영 (2006), "린 건설과 해외 대규모건설 공사 적용 사례: 런던 히드로 공항", 대한건축학회 논문집(구조계), 대한건축학회, 제22권, 제7호, pp.141-148.
  3. 권오현.변재현(1999), "건설업 총요소생산성에 관한 연구", 한국건설산업연구원, 방문사 제16권, 1149호.
  4. 김준한(2004), "건설경제론", 박영사.
  5. 김창덕.이상혁 (2006), "VSM기법을 활용한 커튼월 공사의 설계프로세스 개선", 한국건설관리학회논문집, 한국건설관리학회, 제7권 제5호, pp.128-137.
  6. 이승현∙홍성호(2005), "총 프로젝트 생산성 개념을 활용한 도로 건설공사 작업지연요소의 영향도 평가기법", 대한토목학회논문집, 대한토목학회, 제25권, 제5D호, pp.747-756.
  7. 이승현(2004), "Equivalent Work Unit의적용을 통한 도로건설공사의 총 프로젝트 생산성 측정 방법", 대한토목학회논문집, 대한토목학회, 제24권, 제5D호, pp.787-794.
  8. 임철우∙유정호∙김창덕(2006), "작업성취율 측정을 위한 공정 관리절차의 개선 방안", 대한건축학회 논문집(구조계), 대한건축학회, 제22권, 제11호, pp.722-726.
  9. 정성림∙한주연∙김경래∙신동우 (2004), "중견건설업체의 다중현장관리를 위한 자재조달계획 지원 모델", 한국건설관리학회 논문집, 제5권, 제2호, pp.106-114.
  10. 한국건설기술연구원(2010), "저탄소 도로 미래경쟁력 확충방안 연구", 연구보고서. pp82-102.
  11. 한국건설교통기술평가원 (2003), "다중 현장관리 및 현장간 협업체계 구축을 위한 멀티미디어형 지식관리 시스템 개발" 연구보고서. pp84-112.
  12. 한국건설산업연구원(건산연) (1997), "건설관리 및 경영", 보성각.
  13. 한주연.홍영수.김경래.신동우 (2004), "다중현장관리를 위한 자원조달 지원 모델", 대한건축학회논문집, 제20권, 제11호, pp133-142.
  14. Ballard, G. (1994), "The Last Planner", Lean Construction Institute, Northern California Construction Institute Spring Conference, Monterey, CA, April 22-24.
  15. Kim, Y., Ballard G. (2000), "Is Earned Value Method an Enemy of WorkFlow", Proceedings Eighth Annual Conference of the International Group for Lean Construction, IGLC-6, Brighton, UK, July 17-19.
  16. Kini, D. U. (2000), "Global Program Management - Not Business as Usual", Journal of Management in Engineering, Vol. 16, No. 6, November/December 2000, pp.29-33.
  17. Koskela, L. (1992), "Application of the New Production Theory to Construction", Technical Report #72, Stanford University, Santa Clara, CA, US.
  18. James S, Pennypacker., Lowell D, Dye (2002), "Managing Multiple Projects", New York, Marcel Dekker Inc.
  19. Prieto, Robert (2009), "How Program Management Differs from Project Management", PM Hut. Accessed 17. Oct 2009.
  20. Project Management Institute(PMI) (2008), "The Standard for Program Management", 2nd Ed, Project Management Institute.

Cited by

  1. Improving Road Construction Productivity by Developing a Programmatic Resource Distribution System for Equipment Sharing in Multi-sectioned Road Construction Projects vol.14, pp.3, 2013, https://doi.org/10.6106/kJCEM.2013.14.3.134