참고문헌
- P. F. Becher, D. Lewis, K. R. Carman, and A. C. Gonzalez, "Thermal Shock Resistance of Ceramics: Size and Geometry Effects in Quench Tests," Ceram. Bull., 59 [5] 542-45 (1980).
- K. T. Faber, M. D. Huang, and A. G. Evans, "Quantitative Studies of Thermal Shock in Ceramics Based on a Novel Test Technique," J. Am. Ceram. Soc., 64 [5] 296-301 (1981). https://doi.org/10.1111/j.1151-2916.1981.tb09606.x
- D. Lewis, "Thermal Shock and Thermal Shock Fatigue Testing of Ceramics with the Water Quench Test," Fracture Mechanics of Ceramics, Vol. 5, pp. 487-96, ed. R. Bradt, A. G. Evans, D. P. H. Hasselman, and F. F. Lange, 1983.
- Y. Mizutani, T. Nishikawa, T. Fukui, and M. Takatsu, "Thermal Shock Fracture of Ceramic Disk under Rapid Heating," J. Ceram. Soc. Jpn, 103 [5] 525-28 (1995). https://doi.org/10.2109/jcersj.103.525
- F. Mignard, C. Olagnon, G. Fantozzi, P. Chantrenne, and M. Raynaud, "Thermal Shock behavior of a Coarse Grain Porous Alumina," J. Mater. Sci., 31 2131-38 (1996). https://doi.org/10.1007/BF00356636
- H. Awaji, T. Takahashi, N. Yamamoto, and T. Nishikawa, "Analysis of Temperature/Stress Distributions in Thermal Shocked Ceramic Disks in Relation to Temperature-Dependent Properties," J. Ceram. Soc., Jpn, 106 [4] 358-62 (1998). https://doi.org/10.2109/jcersj.106.358
- M. Hamidouche, N. Bouaouadja, C. Olagnon, and G. Fantozzi, "Thermal Shock Behavior of Mullite Ceramic," Ceramics Int., 29 599-09 (2003). https://doi.org/10.1016/S0272-8842(02)00207-9
- A. G. Evans, M. Linzer, H. Johnson, D. P. H. Hasselman, and M. E. Kipp, "Thermal Fracture Studies in Ceramic Systems Using an Acoustic Emission Technique," J. Mater. Sci., 10 1608-15 (1975). https://doi.org/10.1007/BF01031862
- W. D. Kingery, "Factors Affecting Thermal Stress Resistance of Ceramic Materials," J. Am. Ceram. Soc., 38 [1] 3-15 (1955). https://doi.org/10.1111/j.1151-2916.1955.tb14545.x
- D. P. H. Hasselman, "Figures-of-merit for the Thermal Stress Resistance of High-temperature Brittle Materials: a Review," Ceramurgia Int., 4 [4] 147-50 (1978). https://doi.org/10.1016/0390-5519(78)90028-5
- D. P. H. Hasselman, "Unified Theory of Thermal Shock Fracture Initiation and Crack Propagation in Brittle Ceramics," J. Am. Ceram. Soc., 52 [11] 600-04 (1969). https://doi.org/10.1111/j.1151-2916.1969.tb15848.x
- R. W. Davidge and G. Tappin, "Thermal Shock and Fracture in Ceramics," Trans. British Ceram. Soc., 66 405-22 (1967).
- H. Awaji, "Thermal Shock Fracture Toughness by Infrared Radiation Heating Technique(in Jpn)," Trans. JSME, 62A [595] 700-06 (1996).
- T. J. Lu and N. A. Fleck, "The Thermal Shock Resistance of Solids," Acta Mater., 46 [13] 4755-68 (1998). https://doi.org/10.1016/S1359-6454(98)00127-X
- M. Collin and D. Rowcliffe, "Analysis and Prediction of Thermal Shock in Brittle Materials," Acta Mater., 48 1655-65 (2000). https://doi.org/10.1016/S1359-6454(00)00011-2
- H. Awaji and S. Sato, "Stress Intensity Factor of an Edge Crack in a Disk and Thermal Shock Fracture Toughness (in Jpn)," Jpn. Soc. Str. & Fract. Mater., 13 78-85 (1978).
- Y. Takeuchi and T. Furukawa, "Some Considerations on Thermal Shock Problems in a Plate," J. Appl. Mech., 48 [3] 113-18 (1981). https://doi.org/10.1115/1.3157552
- D. P. H. Hasselman, "Strength Behavior of Polycrystalline Alumina Subjected to Thermal Shock," J. Am. Ceram. Soc., 53 [9] 490-95 (1970). https://doi.org/10.1111/j.1151-2916.1970.tb15997.x
- T. Sakuma, U. Iwata, and H. Takaku, "Thermal Shock Resistance of Ceramics: A Novel Quenching Method and Non-Steady Heat Transfer Coefficients," in Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics, pp. 537-44, Edited by J. F. Keffer, et al., Elsevier Science Pub. Co. ltd., 1991.
- T. Sakuma, U. Iwata, H. Takaku, and N. Okabe, "Estimation of Thermal Shock Resistance of Ceramics (in Jpn)," Trans. JSME, 59A 131-36 (1993).
- J. P. Singh, J. R. Thomas, and D. P. H. Hasselman, "Analysis of Effect of Heat-Transfer Variables on Thermal Stress Resistance of Brittle Ceramics Measured by Quenching Experiments," J. Am. Ceram. Soc., 63 [3-4] 140-44 (1980). https://doi.org/10.1111/j.1151-2916.1980.tb10678.x
-
J. P. Singh, D. P. H. Hasselman, and G. Ziegler, "Effect of Drop Height on Critical Temperature Difference (
${\Delta}T_c$ ) for Brittle Ceramics Subjected to Thermal Shock by Quenching into Water," J. Am. Ceram. Soc., 66 [10] C194-95 (1983). https://doi.org/10.1111/j.1151-2916.1983.tb10552.x - J. P. Singh, Y. Tree, and D. P. H. Hasselman, "Effect of Bath and Specimen Temperature on the Thermal Stress Resistance of Brittle Ceramics Subjected to Thermal Quenching," J. Mater. Sci., 16 2109-18 (1981). https://doi.org/10.1007/BF00542371
- W. P. Rogers and A. F. Emery, "Contact thermal Shock Test of Ceramics," J. Mater. Sci., 27 146-52 (1992). https://doi.org/10.1007/BF02403657
- J. Jung, A. Reck, and R. Ziegler, "The Compatibility of Alumina Ceramics with Liquid Sodium," J. Nuclear Mater., 119 339-50 (1983). https://doi.org/10.1016/0022-3115(83)90213-1
- W. Dienst, H. Scholz, and H. Zimmermann, "Thermal Shock Resistance of Ceramic Materials in Melt Immersion Tests," J. Eur. Ceram. Soc., 5 365-70 (1989). https://doi.org/10.1016/0955-2219(89)90040-X
- T. Sakuma, U. Iwata, and H. Takaku, "Estimation of Thermal Shock Resistance of Ceramics (in Jpn)," Trans. JSME, 58A 470-75 (1992).
- W. O. Soboyejo, C. Mercer, J. Schymanski, and S. R. van der Laan, "Investigation of Thermal Shock in a High-Temperature Refractory Ceramics: A Fracture Mechanics Approach," J. Am. Ceram. Soc., 83 [6] 1309-14 (2001).
- V. R. Vedula, D. J. Green, J. R. Hellmann, and A. E. Segall, "Test Methodology for the Thermal Shock Characterization of Ceramics," J. Mat. Sci., 33 5427-32 (1998). https://doi.org/10.1023/A:1004410719754
- A. G. Tomba and A. L. Cavalieri, "Evaluation of the Heat Transfer Coefficient in Thermal Shock of Alumina Disks," Mater. Sci. and Eng., A276 76-82 (2000).
- S. Kitaoka, Y. Matsudaira, C-H Chen, and H. Awaji, "Thermal Cyclic Fatigue Behavior of Porous Ceramics for Gas Cleaning," J. Am. Ceram. Soc., 87 906-13 (2004). https://doi.org/10.1111/j.1551-2916.2004.00906.x
- F. Hugot and J. C. Glandus, "Thermal Shock of Alumina by Compressed Air Cooling," J. Eur. Ceram. Soc., 27 1919-25 (2007). https://doi.org/10.1016/j.jeurceramsoc.2006.06.012
- M. I. Nieto, R. Martínez, L. Mazerolles, and C. Baudín, "Improvement in the Thermal Shock Resistance of Alumina Through the Addition of Submicron-sized Aluminum Nitride Particles," J. Eur. Ceram. Soc., 24 2293-01 (2004). https://doi.org/10.1016/j.jeurceramsoc.2003.07.011
-
M. Ishitsuka, T. Sato, T. Endo, and M. Shimada, "Thermal Shock Fracture Behavior of
$ZrO_2$ Based Ceramics," J. Mater. Sci. Lett., 24 4057-61 (1989). https://doi.org/10.1007/BF01168974 - K. J. Konsztowicz, "Crack Growth and Acoustic Emission in Ceramics During Thermal Shock," J. Am. Ceram. Soc., 73 [3] 502-08 (1990). https://doi.org/10.1111/j.1151-2916.1990.tb06545.x
- S. Mezquita, R. Uribe, R. Moreno, and C. Baudin, "Influence of Mullite Additions on Thermal Shock Resistance of Dense Alumina Materials, Part 2: Thermal Properties and Thermal Shock Behavior," Brit. Ceram. Trans., 100 246-50 (2001). https://doi.org/10.1179/096797801681503
- K. Tagashira, T. Mikami, J. Okamura, T. Sasa, and M. Obata, "Thermal Shock Test of Ceramics by Helium Gas Cooling through a Narrow Slit," JSME Int. J., Series A, 45 [4] 612-19 (2002). https://doi.org/10.1299/jsmea.45.612
- K. Niihara, J. P. Singh, and D. P. H. Hasselman, "Observations on the Characteristics of a Fluidized Bed for the Thermal Shock Testing of Brittle Ceramics," J. Mater. Sci., 17 2553-59 (1982). https://doi.org/10.1007/BF00543887
- J. Absi and J. C. Glandus, "Improved Method for Severe Thermal Shocks Testing of Ceramics by Water Quenching," J. Eur. Ceram. Soc., 24 2835-38 (2004). https://doi.org/10.1016/j.jeurceramsoc.2003.09.024
- F. Osterstock, I. Monot, G. Desgardin, and B. L. Mordike, "Influence of Grain Size on the Toughness and Thermal Shock Resistance of Polycystalline," J. Eur. Ceram. Soc., 16 687-94 (1996). https://doi.org/10.1016/0955-2219(95)00190-5
- M. Enoki and T. Kishi, "Evaluation of Stochastic Microfracture Process of Particle Dispersed Composites," Mater. Trans., JIM, 37 [3] 399-03 (1996). https://doi.org/10.2320/matertrans1989.37.399
- H. Tanaka, S. Honda, T. Nishikawa, and H. Awaji, "Thermal Shock Test for Ceramics by a Water-Flow Cooling Method," J. Ceram. Soc. Jpn, Supplement ,112 [5] S299-04 (2004).
-
P. F. Becher, "Effect of Water Bath Temperature on the Thermal Shock of
$Al_2O_3$ ," J. Am. Ceram. Soc., 64 C17-C18 (1981). - A. F. Emery and A. S. Kobayashi, "Transient Stress Intensity Factors for Edge and Corner Cracks in Quench-Test Specimens," J. Am. Ceram. Soc., 63 410-415 (1980). https://doi.org/10.1111/j.1151-2916.1980.tb10202.x
- S. Honda, S. Hayakawa, T. Nishikawa, and H. Awaji, "Water-Quench Thermal Shock Testing for Ceramic Disks," J. Ceram. Soc. Jpn, 108 [2] 166-71 (2000). https://doi.org/10.2109/jcersj.108.1254_166
- H. Tanaka, Y. Maki, K. Tsuboi, S. Honda, T. Nishikawa, and H. Awaji, "Thermal Stresses in Porous Materials under Thermal Shock by Cooling Medium - Infiltration Effect on Thermal Stress Distributions -," J. Ceram. Soc. Jpn., 112 172-78 (2004). https://doi.org/10.2109/jcersj.112.172
- D. P. H. Hasselman, E. P. Chen, and P. A. Urick, "Prediction of the Thermal Fatigue Resistance of Indented Glass Rods," Am. Ceram. Soc. Bull., 57 190-92 (1978).
- F. Osterstock, "Contact Damage Submitted to Thermal Shock: a Method to Evaluate and Simulate Thermal Shock Resistance of Brittle Materials," Mater. Sci. and Enging., A168 41-44 (1993).
- S. R. Choi and J. A. Salem, "Thermal Shock Behavior of Silicon Nitride Flexure Beam Specimens with Indentation Cracks," J. Am. Ceram. Soc., 77 [3] 833-38 (1994). https://doi.org/10.1111/j.1151-2916.1994.tb05373.x
- T. Andersson and D. J. Rowcliffe, "Indentation Thermal Shock Test for Ceramics," J. Am. Ceram. Soc., 79 [6] 1509-14 (1996). https://doi.org/10.1111/j.1151-2916.1996.tb08758.x
- S-K. Lee, J. D. Moretti, M. J. Readey, and B. R. Lawn, "Thermal Shock Resistance of Silicon Nitrides Using an Indentation-Quench Test," J. Am. Ceram. Soc., 85 [1] 279-81 (2002).
- P. Pettersson, M. Johnsson and Z. Shen, "Parameters for Measuring the Thermal Shock of Ceramic Materials with an Indentation-Quench Method," J. Eur. Ceram. Soc., 22 1883-89 (2002). https://doi.org/10.1016/S0955-2219(01)00504-0
- R. Uribe and C. Baudín, "Influence of a Dispersion of Aluminum Titanate Particles of Controlled Size on the Thermal Shock Resistance of Alumina," Am. Ceram. Soc., 86 846-50 (2003). https://doi.org/10.1111/j.1151-2916.2003.tb03385.x
- A. Kovalcikova, J. Dusza, and P. Sajgalik, "Thermal Shock Resistance and Fracture Toughness of Liquid-Phase-Sintered SiC-based Ceramics," J. Eur. Ceram. Soc., 29 2387-94 (2009). https://doi.org/10.1016/j.jeurceramsoc.2009.01.021
- G. D. Quinn and R. C. Bradt, "On the Vickers Indentation Fracture Toughness Test," J. Am. Ceram. Soc., 90 673-80 (2007). https://doi.org/10.1111/j.1551-2916.2006.01482.x
- M. Nawa, K. Yamazaki, T. Sekino, and K. Niihara, "Microstructure and Mechanical Behavior of 3Y-TZP/Mo Nanocomposites Possessing a Novel Interpenetrated Intragranular Microstructure," J. Mater. Sci., 31 2849-58 (1996). https://doi.org/10.1007/BF00355992
- S. Sato, K. Sato, Y. Imamura, and J. Kon, "Determination of the Thermal Shock Resistance of Graphite by Arc Discharge Heating," Carbon, 13 309-16 (1975). https://doi.org/10.1016/0008-6223(75)90035-4
- S. Sato, H. Awaji, and H. Akuzawa, "Evaluation of the Thermal Shock Fracture Toughness of Reactor Graphites by Arc Discharge Heating," Carbon, 16 103-09 (1978). https://doi.org/10.1016/0008-6223(78)90005-2
- C. Schubert, H. A. Bahr, and H. J. Weiss, "Crack Propagation and Thermal Shock Damage in Graphite Disks Heated by Moving Electron Beam," Carbon, 24 [1] 21-28 (1986). https://doi.org/10.1016/0008-6223(86)90205-8
- R. Benz, A. Naoumidis, and H. Nickel, "Thermal Shock Testing of Ceramics with Pulsed Laser Irradiation," J. Nucl. Mater., 150 128-39 (1987). https://doi.org/10.1016/0022-3115(87)90069-9
-
S. Akiyama, S. Amada, M. Shimada, and T. Yoshii, "Estimation of Thermal Shock Resistance of
$Al_2O_3$ Ceramics by Laser Irradiation," JSME Int. J., Ser. A, 38 [4] 594-600 (1995). - S. Amada, W. Y. Nong, Q. Z. Min, and S. Akiyama, "Thermal Shock Resistance of Carbon-Carbon (C/C) Composites by Laser Irradiation Technique,"Ceram. Int., 25 61-67 (1999). https://doi.org/10.1016/S0272-8842(98)00002-9
- J-H. Kim, Y-S. Lee, D-H. Kim, N-S. Park, J. Suh, J-O. Kim, and S-I. Moon, "Evaluation of Thermal Shock Strength for Graphite Materials Using a Laser Irradiation Method," Mater. Sci. & Eng., A 387-389 385-89 (2004). https://doi.org/10.1016/j.msea.2004.01.136
- G. C. Wei and J. Walsh, "Hot-Gas-Jet Method and Apparatus for Thermal-Shock Testing," J. Am. Ceram. Soc., 72 [7] 1286-89 (1989). https://doi.org/10.1111/j.1151-2916.1989.tb09730.x
- J. Lamon and D. Pherson, "Thermal Stress Failure of Ceramics under Repeated Rapid Heatings," J. Am. Ceram. Soc., 74 [6] 1188-96 (1991). https://doi.org/10.1111/j.1151-2916.1991.tb04087.x
- G. A. Schneider and G. Petzow, "Thermal Shock Testing of Ceramics - A New Testing Method," J. Am. Ceram. Soc., 74 [1] 98-02 (1991). https://doi.org/10.1111/j.1151-2916.1991.tb07303.x
- H. Awaji and T. Endo, "Thermal Shock Fracture Testing for Float Glass by Infrared Radiation Technique (in Jpn)," J. Ceram. Soc. Jpn, 103 [9] 960-65 (1995). https://doi.org/10.2109/jcersj.103.960
- H. Awaji, S. Honda, and T. Nishikawa, "Thermal Shock Parameters of Ceramics Evaluated by Infrared Radiation Heating," JSME Int. J., Series A, 40 [4] 414-22 (1997). https://doi.org/10.1299/jsmea.40.414
- T. Endo, Japanese Utility Model Registration Application No. 59-79600, March 31, 1984.
- T. Endo, Japanese Patent Application No. 60-50437, March 15, 1985.
- S.S. Manson, "Behavior of Materials Under Conditions of Thermal Stress," NACA TN 2933 317-50 (1953).
- R. L. Coble and W. D. Kingery, "Effect of Porosity on Thermal Stress Fracture," J. Am. Ceram. Soc., 38 33-37 (1955). https://doi.org/10.1111/j.1151-2916.1955.tb14549.x
- Y. W. May and A. G. Atkins, "Fracture Toughness and Thermal Shock of Tool and Turbine Ceramics," J. Mater. Sci., 10 1904-19 (1973).
-
D. Lewis, "Comparison of Critical
${\Delta}T_c$ Values in Thermal Shock with the R Parameter," J. Am. Ceram. Soc., 63 713-714 (1980). https://doi.org/10.1111/j.1151-2916.1980.tb09868.x - K. Anzai and H. Hashimoto, "Thermal Shock Resistance of Silicon Nitride," J. Mater. Sci., 12 2351-53 (1997).
- S. P. Timoshenko and J. N. Goodier, "Theory of Elasticity", pp.433-84, McGraw-Hill Book Co., New York, 1934.
- S. Honda, T. Takahashi, S. Morooka, S. Zhang, T. Nishikawa, and H. Awaji, "Thermal Stress and Stress Intensity Factor Considering Temperature Dependent Material Properties (in Jpn)," J. Soc. Mater. Sci. Jpn, 46 1300-05 (1997) . https://doi.org/10.2472/jsms.46.1300
- H. Awaji, H-J. Xian, H. Tanaka, and S. Honda, "Water-Flow Cooling and Infrared Radiation Heating Techniques for Thermal Shock Test of Ceramics," pp. 557-60, Proc. sixth international congress on thermal stresses, May 26-29, Vienna, 2005.
- W. P. Rogers, A. F. Emery, R. C. Bradt, and A. S. Kobayashi, "Statistical Study of Thermal Fracture of Ceramic Materials in the Water Quench Test," J. Am. Ceram. Soc., 70 [6] 406-12 (1987). https://doi.org/10.1111/j.1151-2916.1987.tb05660.x
- T. Sakuma, U. Iwata, and H. Takaku, "Estimation of Thermal Shock Resistance of Ceramics (4th Report) (in Jpn)," Trans. JSME, 58A 1424-29 (1992).
- W-J. Lee, Y. Kim, and E. D. Case, "The Effect of Quenching Media on the Heat Transfer Coefficient of Polycrystalline Alumina," J. Mater. Sci., 28 2079-83 (1993). https://doi.org/10.1007/BF00367565
- T. Nishikawa, T, Gao, M. Hibi, and M. Takatsu, "Heat Transmission during Thermal Shock Testing of Ceramics," J. Mater., Sci., 29 213-17 (1994). https://doi.org/10.1007/BF00356595
-
R. Badaliance, D. A. Krohn, and D. P. H. Hasselman,"Effect of Slow Crack Growth on the Thermal-Stress Resistance of an
$Na_2O-CaO-SiO_2$ Glass," J. Am. Ceram. Soc., 57 432-36 (1974). https://doi.org/10.1111/j.1151-2916.1974.tb11375.x - H. Awaji, S. Honda, and T. Nishikawa, "Statistical Approach to Strength Degradation Analysis during Water Quenching," J. Ceram. Soc. Jpn, 106 [6] 551-54 (1998). https://doi.org/10.2109/jcersj.106.551
- M. Oguma and T. Motomiya, "A BET Surface Area Measurement Technique for Evaluation of Crack Extension in Alumina Pellets Subjected to Thermal Shock," J. Ceram. Soc. Jpn, 97 778-82 (1989). https://doi.org/10.2109/jcersj.97.778
- M. Hefetz and S. I. Rokhlin, "Thermal Shock Damage Assessment in Ceramics Using Ultrasonic Waves," J. Am. Ceram. Soc., 75 [7] 1839-45 (1992). https://doi.org/10.1111/j.1151-2916.1992.tb07205.x
- D. N. Boccaccini, M. Romagnoli, P. Veronesi, M. Cannio, C. Leonelli, G. Pellacani, T. V. Husovic, and A. R. Boccaccini, "Quality Control and Thermal Shock Damage Characterization of High-Temperature Ceramics by Ultrasonic Pulse Velocity Testing," Int. J. Appl. Ceram.Technol., 4 [3] 260-68 (2007). https://doi.org/10.1111/j.1744-7402.2007.02139.x
- W. J. Lee and E. D. Case, "Thermal Fatigue in Polycrystalline Alumina," J. Mater. Sci., 25 5043-54 (1990). https://doi.org/10.1007/BF00580128
- F. Mignard, C. Olagnon, and G. Fantozzi, "Acoustic Emission Monitoring of Damage Evaluation in Ceramics Submitted to Thermal Shock," J. Eur. Ceram. Soc., 15 651-53 (1995). https://doi.org/10.1016/0955-2219(95)00032-P
- F. Mignard, C. Olagnon, M. Saadaoui, and G. Fantozzi, "Thermal Shock Behavior of a Coarse Grain Porous Alumina," J. Mater. Sci., 31 2437-41 (1996). https://doi.org/10.1007/BF01152958
- L. J. Vandeperre, A. Kristfferson, E. Carlsröm, and W. J. Clegg, "Thermal Shock of Layered Ceramic Structures with Crack-Deflecting Interfaces," J. Am. Ceram. Soc., 84 104-10 (2001). https://doi.org/10.1111/j.1151-2916.2001.tb00615.x
- D. Sherman, "Alumina/NiCu Laminate under Thermal Shock up to 1000C: I, Experimental," J. Am. Ceram. Soc., 84 2819-26 (2001). https://doi.org/10.1111/j.1151-2916.2001.tb01099.x
- K. Kokini, J. DeJonge, S. Rangaraj, and B. Beardsley, "Thermal Shock of Functionally Graded Thermal Barrier Coatings with Similar Thermal Resistance," Surface & Coatings Tech., 154 223-31 (2002). https://doi.org/10.1016/S0257-8972(02)00031-2
- A. Kawasaki and R. Watanabe, "Thermal Fracture Behavior of Metal/Ceramic Functionally Graded Materials," Eng. Fract. Mech., 69 1713-28 (2002). https://doi.org/10.1016/S0013-7944(02)00054-1
- B-L. Wang, Y-W. Mai, and X-H. Zhang, "Thermal Shock Resistance of Functionally Graded Materials," Acta Mater., 52 4961-72 (2004). https://doi.org/10.1016/j.actamat.2004.06.008
- G. Jin, M. Takeuchi, S. Honda, T. Nishikawa, and H. Awaji, "Thermal Shock Testing on Mullite/Mo FGM Disks Using an Infrared Radiation/Water Flow Technique," J. Ceram. Soc. Jpn, Supplement, 112 S286-S290 (2004).
- G. Jin, M. Takeuchi, S. Honda, T. Nishikawa, and H. Awaji, "Properties of Multilayered Mullite/Mo Functionally Graded Materials Fabricated by Powder Metallurgy Processing," Mater. Chem. & Phys., 89 238-43 (2005). https://doi.org/10.1016/j.matchemphys.2004.03.031
- V. R. Vedula, S. J. Glass, D. M. Saylor, G. S. Rohrer, W. C. Carter, S. A. Langer, and E. R. Fuller Jr., "Residual-Stress Predictions in Polycrystalline Alumina," J. Am. Ceram. Soc., 84 2947-54 (2001). https://doi.org/10.1111/j.1151-2916.2001.tb01119.x
-
T. K. Gupta, "Strength Degradation and Crack Propagation in Thermally Shocked
$Al_2O_3$ ," J. Am. Ceram. Soc., 55 [5] 249-53 (1972). https://doi.org/10.1111/j.1151-2916.1972.tb11273.x - A. G. Evans, "Microfracture from Thermal Expansion Anisotropy - I. Single Phase Systems," Acta Metallurgica, 26 1845-53 (1978). https://doi.org/10.1016/0001-6160(78)90097-4
- A. Zimmermann, E. R. Fuller Jr., and J. Rödel, "Residual Stress Distributions in Ceramics," J. Am. Ceram. Soc., 82 3155-60 (1999).
- H. Awaji, T. Matsunaga, and S-M. Choi, "Relation between Strength, Fracture Toughness, and Critical Frontal Process Zone Size in Ceramics," Mater. Trans., 47 [6] 1532-39 (2006). https://doi.org/10.2320/matertrans.47.1532
- K. Niihara, "New Design Concept of Structural Ceramics - Ceramic Nanocomposites-," J. Ceram. Soc. Jpn, 99 974-82 (1991). https://doi.org/10.2109/jcersj.99.974
- H. Awaji, "Ceramic-Based Nanocomposites," "Handbook of Nanoceramics and their based Nanodevices, Vol. 2", pp. 231-251, Ed. by T-Y. Tseng and H. S. Nalwa, Am. Sci. Pub, Los Angeles, 2009.
- H. Okamura, "Senkei Hakairikigaku Nyuumon (Introduction to Linear Fracture Mechanics) (in Jpn)", p.76 , Baifukan, Tokyo, 1976.
- S-M. Choi and H. Awaji, "Nanocomposites - a New Material Design Concept," Sci. & Tech. Advanced Mater., 6 2-10 (2005). https://doi.org/10.1016/j.stam.2004.07.001
피인용 문헌
- Glassy Carbon: A Promising Material for Micro- and Nanomanufacturing vol.11, pp.10, 2018, https://doi.org/10.3390/ma11101857
- Pre-ignition laser ablation of nanocomposite energetic materials vol.113, pp.21, 2012, https://doi.org/10.1063/1.4808458