Abstract
The purpose of this paper is to develop the alkali-activated concrete which uses 100% fly ash as a binder without any cement. The compressive strength of the mortar was examined depending on the chemical change in alkali-activator through SEM and SEM/EDS observations and the XRD analysis. It was found from the test that the higher molar concentration induced the greater effect on the initial strength, and that $Si^{4+}$ and $Al^{3+}$ were eluted relative to the compressive strength of mortar. In addition, it was confirmed that Al and Si were determined to be most influential ingredients on the microstructural development of the mortar, and that the different ingredient of the activator was almost no change in solidity from the XRD analysis.
이 논문에서는 시멘트를 전혀 사용하지 않고 결합재로서 플라이애쉬를 100% 사용한 알칼리 활성 콘크리트를 개발할 목적으로 알칼리 활성화제의 화학적 변화에 따른 모르타르의 압축강도에 미치는 영향과 SEM/ EDS 및 XRD 등의 미세구조 분석을 검토하였다. 그 결과, 몰농도가 높을수록 초기강도에 큰 영향을 미치는 것으로 분석되었고, 압축강도의 크기에 비례하여 $Si^{4+}$ 및 $Al^{3+}$량이 용출되었다. 또한 SEM 및 EDS로 조직을 분석한 결과 모르타르의 조직구조에 큰 영향을 미치는 성분은 Al 및 Si 성분이었고, XRD 분석결과 활성화제 성분차이에 따른 세기(intensity)의 차이는 거의 없는 것으로 나타났다.