Journal of the Architectural Institute of Korea Structure & Construction (대한건축학회논문집:구조계)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

Prediction of Confined Effective for Cylinder Type Concrete Compressive Members using CFRP

탄소섬유쉬트로 횡구속시킨 원형콘크리트 압축부재의 거동 예측

  • Received : 2012.01.05
  • Published : 2012.04.25
⟨ Previous Next ⟩

Abstract

A major cause of damage in reinforced concrete (RC) structures such as bridges, building, and wharves is aging and structural deterioration under severe environments. Such deterioration as concrete cracks, corrosion of steel, and deformation of structural members can significantly degrade the structural performance and safety. Therefore, effective and easy-to-use methods are required to repair and strengthen these concrete structures. In addition, it sometimes needs to increase the load capacity of structures for carrying additional loads due to the change of the purpose of structures and the new extension of existing structures. In this study, the stress-strain curves of the specimens with a low ratio of confinement (represented by the area ratio) show a descending trend after reaching the maximum stress, while the stress.strain curves of the specimens with a high ratio of confinement show an ascending trend until failure. Constitutive models of a confined concrete are developed based on the compressive test results. Good agreement is observed between the experimental (actual) and analytical (predicted) stress-strain curves, demonstrating the validity of the proposed constitutive model and the parameter values. Such a model is useful for design and analysis of concrete structures strengthened by the proposed narrow strips of CFRP laminates.

Keywords

Acknowledgement

Supported by : 한국연구재단

References

  1. Richart F.E., Brandtzaeg A. and Brown R.L. "A study of the failure of concrete under confined compressive stress" Bulletin 185, University of Illinois engineering experimental station, Champion, 1928. Bulletin No.185. pp 85.
  2. Mander J. B, Priestley, M. J., and Park, R "Theoretical Stress-strain model for confined concrete" Journal of structural Engineering, ASCE, Vol. 114, No. 8, 1988, pp. 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  3. Lam, L. and Teng, J. G., "Strength Models for Fiber-Reinforced Plastic-confined Concrete", Journal of Structural Engineering, ASCE, Vol. 128, No. 5, 2002, pp. 612-623. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:5(612)
  4. 정일영, "콘크리트의 횡구속으로 인한 역학적 특성의 개선에 관한 연구", 대한건축학회논문집 Vol. 9, No. 3, 1993, pp.133-138.
  5. 조순호, "FRP 합성재료에 의하여 구속된 콘크리트의 응력-변형률 응답예측", 한국콘크리트학회 논문집 Vol 19, No. 6, 2007, pp. 803-810.
  6. Hosotani M, Kawashima K. "A stress-strain model for concrete cylinders confined by both Carbon Fiber Sheets and Tie Reinforcement", JSCE Journal of Concrete Engineering, Vol. 43, 1999, pp. 25-42.
  7. Marwan N. Youssef,, Maria Q. Feng, Ayman S. Mosallam, "Stress-srrain model for concrete confined by FRP composites", Composites Part B: Engineering, Vol. 38, 2007, pp. 614-628. https://doi.org/10.1016/j.compositesb.2006.07.020
  8. 박태원, 나웅진, 권성준, "FRP로 보강된 콘크리트 부재의 압축응력-변형률 예측을 위한 뉴로퍼지모델의 적용", 한국콘크리트학회 논문집 Vol. 22, No.1, 2010, pp 19-27.
  9. Samaan M, Mirmiran A, Shahawy M. "Model of Concrete Confined by Fiber Composites" ASCE Journal of Structural Engineering, Vol. 124, No. 9, 1998, pp.1025-1031. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:9(1025)
  10. Hoppel CR, Bogetti TA, Gillespie JW, Howie I, Karbhari VM. "Analysis of a Concrete Cylinder with a Composite Hoop Wrap", Proceedings of ASCE Material Engineering Conference. New York, 1994, pp. 191-198.
  11. Toutanji H. "Stress-strain characteristics of concrete columns externally confined with advanced fiber composite sheets", ACI Material Journal, Vol. 96, No. 3, 1999, pp. 397-404.