DOI QR코드

DOI QR Code

The Optimal Location Selection Method of Measurement for Compensation of Column Shortening

기둥축소 보정을 위한 계측의 최적 위치 선정 방법

  • Received : 2011.07.27
  • Published : 2012.01.25

Abstract

The column shortening measurement has been carried out during the construction phase of a tall building to verify the accuracy of the column shortening prediction. The measurement sensors were installed on the stories at a regular interval which was determined by considering the total number of stories. Such measurement is not suitable for the diagnosis of the discrepancy between prediction and measurement. In this study, the optimum locations for the measurement sensors were investigated through computational simulation. The most effective location for the sensor was the interior column on the first floor when the structural properties of all columns were equal. If the structural properties of columns were changed at a certain floor, the first floor and the changed floor were recommended for the installation of the sensors. The discrepancy was confirmed to be different depending on the error in the contributing factors. This study enables us to save the cost for measuring by installing the sensors at the optimum locations and to enhance the efficiency of the measurement by analyzing the causes of the discrepancy.

Keywords

Acknowledgement

Supported by : 국토해양부, 한국연구재단

References

  1. Fintel M., Ghosh S.K. and Iyengar H., Column Shortening in Tall Structure-Prediction and Compresation, Portand Cement Association, 1987
  2. Wonjik Yang, Waoho Yi., Development of a Prediction Algorithm for Column Shortening in Hise-Rise Buildings Using a Neural Network, Key Engineering Materials, Vol. 348-349, p.p. 901-904, 2007 https://doi.org/10.4028/www.scientific.net/KEM.348-349.901
  3. 김한수, 정세훈, 신승학, 시간간격과 시공단계 간략화를 이용한 RC골조의 기둥축소 해석, 대한건축학회논문집 구조계, 제 26권, 제6호, p.p. 3-10, 2010
  4. 박성우, 최세운, 박효선, 이동 평균법을 이용한 고층건물의 부등축소량 보정기법, 한국전산구조공학회 논문집, 제23권, 제4호, p.p. 395-401, 2010
  5. 김영민, 현장 적용성을 고려한 기둥축소량의 최적보정시스템 개발, 한국전산구조공학회 논문집, 제 23권, 제2호, p.p. 139-152, 2010
  6. 김한수, 조석희, 김도균, 초고층건물 RC코어와 SRC기둥의 기둥축소량 해석 및 현장계측, 대한건축학회논문집 구조계, 19권, 제11호, p.p. 49-56, 2003
  7. 소광호, 정동환, 양극영, 초고층 기둥축소량 보정을 위한 측 량기법에 관한 연구, 대한건축학회논문집 구조계, 19권 제5 호, p.p. 169-176, 2003
  8. 소광호, 양극영, 시공성 향상을 위한 초고층 건물의 기둥축소 량 보정법에 관한 연구, 대한건축학회논문집 구조계, 19권, 11호, p.p 157-164, 2003
  9. 조용수, 송화철, 초고층건물 기둥축소량의 확률론적 해석법, 대한건축학회논문집 구조계, 18권, 1호, p.p.53-60, 2002
  10. Midas IT, Midas/Gen-General Structure Design System for Windows, 2008
  11. CEB(Comite Euro-International Du Beton), CEB-FIP Mode l Code 1990, Thomas Telford Services Ltd, 1993