• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.2
• /
• pp.141-148
• /
• 2011

This study presents the optimal grouping technique of columns which groups together columns of similar shortening trends to improve the efficiency of column shortening compensation. Here, Kohonen's self-organizing feature map which can classify patterns of input data by itself with unsupervised learning was used as the optimal grouping algorithm. The Kohonen network applied in this study is composed of two input neurons and variable output neurons, here the number of output neuron is equal to the column groups to be classified. In input neurons the normalized mean and standard deviation of shortening of each columns are inputted and in the output neurons the classified column groups are presented. The applicability of the proposed algorithm was evaluated by applying it to the two buildings where column shortening analyses had already been performed. The proposed algorithm was able to classify columns with similar shortening trends as one group, and from this we were able to ascertain the field-applicability of the proposed algorithm as the optimal grouping of column shortening.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.1 no.3
• /
• pp.59-68
• /
• 1997

The necessity of a high-rise building in big cities gave a new problem to structural engineers. The shortening effect of vertical members needs special considerstion in the desigh and construction of high-rise buildings. The shortening of each column transfers load to nonstructural members such as partitions, cladding, and M/E systems which are not designed to carry gravity loads. Also, the slabs and beams will tilt due to the cumulative differential shortening of adjacent vertical members. The main purpose of estimating the total shortening of vertical structural members is to compensate the differential shortening between adjacent members. This paper presents the structural effect of differential shortening between in main structural members. Lateral earthquake load is applied to the 52 story concrete structure which has an initial vertical displacement due to the gravity load. Shortening amount for each vertical member was estimated using the computerized column shortening software. Comparison of stresses between the shortening corrected structure and the uncorrecated structure due to earthquake load was discussed.

• Journal of the Korea Concrete Institute
• /
• v.18 no.1 s.91
• /
• pp.101-108
• /
• 2006

Accurate prediction of time-dependent column shortening is essential for tall buildings in both strength and serviceability aspects. The uncertainty associated with assumed values for concrete properties such as strength, creep, and shrinkage coefficients should be considered for the prediction of time-dependent column shortening of tall concrete buildings. In this study, the column shortenings of 41-story tall concrete building are predicted using monte carlo simulation technique based on the probabilistic analysis. The probabilistic column shortenings considering confidence intervals are compared with the actual column shortenings by field measurement. The time-dependent strains measured at tall bearing wall building were generally lower than the predicted strains and the measured values fell within a range ${\mu}-1.64$, confidence level 90%.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.149-150
• /
• 2010

In this study, optimal location of outrigger for reduction of differential column shortening has been proposed. Optimal location of outrigger for reduction of differential column shortening is the position that the largest differential column shortening develops when the outrigger is not installed.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.1
• /
• pp.75-84
• /
• 2010

According to the available study and experimental data about the long term behavior of CFT(Concrete Filled Tube) columns, the creep and of concrete in CFT columns are smaller than those of RC columns because of the confinement effect of outer steel columns. In this study, the uncertainties associated with assumed values for concrete properties such as strength, creep coefficients, and service load have been considered and analyzed for the prediction of time-dependent column shortening of CFT column. The CFT column shortening analysis using Monte Carlo method is proposed and an of a 37 story tall building with CFT columns is studied for illustration. According to the results obtained by the probability analysis with multi parameters, the effect of variation coefficient for 3 parameters is investigated considering confidence interval.

• Explosives and Blasting
• /
• v.25 no.2
• /
• pp.1-10
• /
• 2007

In this paper, the 1/5 scale models of the reinforced concrete colunms were designed and fabricated. The influence of the number of blasting holes on the exposed length of steel bars and vertical load was investigated. The relation between the length of steel bar and the number of blasting holes was examined by performing the blast tests considering the vertical load on the scaled reinforced concrete columns. Weight of scaled column models by blasting and that of exposed was compared with the number of blasting holes. Finally, based on the exposed length of steel bars and vertical load, the number of blasting holes were calculated. Results shows that the number of blasting holes calculated in this study are suitable for scaled structure models test by blasting demolition.

• Computational Structural Engineering
• /
• v.10 no.1
• /
• pp.62-69
• /
• 1997

본 고에서는 고층건물의 건설과정에서 발생하는 시간의 진행에 따른 기둥의 (장기)변형을 정확히 예측하고 이를 시공중에 보정하도록 함으로써 비구조요소의 강도와 사용을 만족시키기 위한 방법론을 제시하였다. 이 방법론은 실험적 통계치를 기초로 한 약산해법으로서 실무에 쉽게 적용할 수 있다. 52층 RC 건물에 대한 적용 결과 기둥에 발생하는 축소량에 가장 큰 영향을 미치는 것은 탄성변형이며, 건조수축의 효과가 가장 미세한 것으로 나타났다. 그러나, 2년 이상의 장기 변형이 지속될 경우 크립변형의 영향이 탄성변형에 비해 더욱 증가할 것으로 판단된다. 고층의 RC건물인 경우 기둥간 부등축소량의 최대치(=최대 시공오차)는 중간층 근처에서 발생하는 것으로 나타났다.

• Journal of the Korea Concrete Institute
• /
• v.16 no.1 s.79
• /
• pp.36-42
• /
• 2004

Although steel-reinforced concrete(SRC) is widely used in a high-rise building, a methods used to predict the column shortening of SRC structural members has many problems in applying a theoretical equation which considers only the material characteristics of reinforced concrete. In this study, the degree of accuracy of the existing method calculating the column shortening of a high-rise building is examined. For this, first, the actual measurement data are chosen about the column shortening of a high-rise building established with SRC structural members. Then the column shortening of a SRC structural member is calculated through computer program. Finally, the comparison between the measurement data and the analytical ones is executed. According to this study, it can be concluded that there is little difference between the former and the latter. Therefore, the existing method can be used to evaluate the column shortening of a high-rise building using a SRC structural members.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.588-591
• /
• 2010

건물의 수직부재는 시공 후 시간이 지남에 따라 수축하게 된다. 이러한 현상을 기둥축소 현상이라고 부르며 원인으로는 탄성, 비탄성, 환경적 요인 등 여러 가지가 있다. 각 수직 부재에 걸리는 하중의 종류와 크기, 그리고 처한 환경 등이 다르므로 부재별로 축소량에 차이가 있게 된다. 이로 인하여 건물은 여러 가지 피해를 입게 된다. 이에 따라 수직부재인 기둥과 전단벽의 축소량을 예측하는 연구가 활발히 진행되고 있다. 그러나 예측된 축소량을 보정하는 기법에 관한 연구는 그리 많지 않다. 따라서 본 논문에서는 선행 연구되었던 기존의 부등 축소량 보정 기법의 한계에 대하여 지적하고 새로운 보정기법인 평균을 이용한 부등축소량 보정기법을 제시하였다. 본 논문에서 제시한 보정기법의 효용성을 입증하기 위하여 같은 예제에 대하여 기존의 방법과 본 논문에서 제시한 방법을 이용한 결과들을 비교, 정리하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.297-300
• /
• 2010

본 논문에서는 일반적인 해석, 시공단계를 고려한 해석, 시공단계와 장기거동을 고려한 해석의 3가지 해석방법을 사용하여 수평부재의 설계에 적합한 해석방법을 제안하였다. 80층의 2D 구조모델에 3가지 해석방법을 적용하여 각 해석방법에 따라 부등축소량, 수직부재에 작용하는 축력, 수평부재의 단부에 작용하는 내력의 해석결과를 얻어 비교하였다. 또한 부재의 내부에서 철근과 콘크리트의 하중분담율의 시간에 따른 변화양상을 알아보았다. 해석결과 시공단계에 의한 영향은 수평부재에 작용하는 축력과 부등축소량 예측, 부재 내력 해석에 있어서 반드시 고려되어야 함을 알 수 있었다. 장기거동의 효과는 기둥축소에는 크게 영향을 미치지만 수직부재의 축력, 수평부재의 내력에는 변형만큼의 영향은 보이지 않는다. 시공시의 보정량을 결정하기 위해서는 장기거동이 반드시 고려되어야 하지만 부재의 단면설계의 목적으로는 제외되어도 무방할 것으로 판단된다.