DOI QR코드

DOI QR Code

Effect of under-bump-metallization structure on electromigration of Sn-Ag solder joints

  • Chen, Hsiao-Yun (Department of Materials Science and Engineering, National Chiao Tung University) ;
  • Ku, Min-Feng (Department of Materials Science and Engineering, National Chiao Tung University) ;
  • Chen, Chih (Department of Materials Science and Engineering, National Chiao Tung University)
  • 투고 : 2011.08.31
  • 심사 : 2012.03.09
  • 발행 : 2012.03.25

초록

The effect of under-bump-metallization (UBM) on electromigration was investigated at temperatures ranging from $135^{\circ}C$ to $165^{\circ}C$. The UBM structures were examined: 5-${\mu}m$-Cu/3-${\mu}m$-Ni and $5{\mu}m$ Cu. Experimental results show that the solder joint with the Cu/Ni UBM has a longer electromigration lifetime than the solder joint with the Cu UBM. Three important parameters were analyzed to explain the difference in failure time, including maximum current density, hot-spot temperature, and electromigration activation energy. The simulation and experimental results illustrate that the addition 3-${\mu}m$-Ni layer is able to reduce the maximum current density and hot-spot temperature in solder, resulting in a longer electromigration lifetime. In addition, the Ni layer changes the electromigration failure mode. With the $5{\mu}m$ Cu UBM, dissolution of Cu layer and formation of $Cu_6Sn_5$ intermetallic compounds are responsible for the electromigration failure in the joint. Yet, the failure mode changes to void formation in the interface of $Ni_3Sn_4$ and the solder for the joint with the Cu/Ni UBM. The measured activation energy is 0.85 eV and 1.06 eV for the joint with the Cu/Ni and the Cu UBM, respectively.

키워드

과제정보

연구 과제 주관 기관 : National Science Council of R.O.C.

참고문헌

  1. Chang, Y.W., Liang, S.W. and Chen, C. (2006) "Study of void formation due to electromigration in flip-chip solder joints using Kelvin bump probes", Appl. Phys. Lett., 89(3), 032103. https://doi.org/10.1063/1.2226989
  2. Chen, C., Tong, H.M. and Tu, K.N. (2010), "Electromigration and thermomigration in Pb-Free flip-chip solder joints", Annu. Rev. Mater. Res., 40, 531-555. https://doi.org/10.1146/annurev.matsci.38.060407.130253
  3. Chen, H.Y. and Chen, C. (2010), "Measurement of electromigration activation energy in eutectic SnPb and SnAg flip-chip solder joints with Cu and Ni under-bump metallization", J. Mater. Res., 25(9), 1847-1853. https://doi.org/10.1557/JMR.2010.0230
  4. Choi, W.J., Yeh, E.C.C. and Tu, K.N. (2003), "Mean-time-to-failure study of ip chip solder joints on Cu/Ni(V)/Al thin-lm under-bump-metallization", J. Appl. Phys., 94(9), 5665-5671. https://doi.org/10.1063/1.1616993
  5. Dvson, B.F., Anthony, T.R. and Turnbull, D. (1967), "Interstitial diffusion of copper in Tin", J. Appl. Phys., 38(8), 3408-3409.
  6. Lai, Y.S. and Kao, C.L. (2006) "Calibration of electromigration reliability of flip-chip packages by electrothermal coupling analysis", J. Electron. Mater., 35(5), 972-935. https://doi.org/10.1007/BF02692556
  7. Lee, T.Y., Choi, W.J., Tu, K.N., Jang, J.W., Kuo, S.M., Lin, J.K., Frear, D.R., Zeng, K. and Kivilahti, J.K. (2002), "Morphology, kinetics, and thermodynamics of solid-state aging of eutectic PbSn and Pb-free solders (Sn-3.5Ag, Sn-3.8Ag-0.7Cu and Sn-0.7Cu) on Cu", J. Mater. Res., 17(2), 291-301. https://doi.org/10.1557/JMR.2002.0042
  8. Liang, S.W., Chang, Y.W. and Chen, C. (2006a) "Relieving hot-spot temperature and current crowding effects during electromigration in solder bumps by using Cu columns", J. Electron. Mater., 36(10), 1348-1354.
  9. Liang, S.W., Shao, T.L., Chen, C., Yeh, E.C.C. and Tu, K.N. (2006b), "Relieving the current crowding effect in flip-chip solder joints during current stressing", J. Mater. Res., 21(1), 137-146. https://doi.org/10.1557/jmr.2006.0004
  10. Lin, Y.H., Hu, Y.C., Tsai, C.M., Kao, C.R. and Tu, K.N. (2005), "In-situ observation of the void formation-and propagation mechanism in solder joints under current-stressing", ActaMater., 53(7), 2029-2035.
  11. Lin, Y.H., Lai, Y.S., Lin, Y.W. and Kao, C.R. (2008), "Effect of UBM thickness on the mean time to failure of flip-chip solder joints under electromigration", J. Electron. Mater., 37(1), 96-101. https://doi.org/10.1007/s11664-007-0293-3
  12. Lin, Y.L., Chang, C.W., Tsai, C.M., Lee, C.W. and Kao, C.R. (2006), "Electromigration-induced UBM consumption and the resulting failure mechanisms in flip chip solder joints", J. Electron. Mater., 35(5), 1010-1016. https://doi.org/10.1007/BF02692561
  13. Liu, A.A., Kim, H.K., Tu, K.N. and Totta, P.A. (1996), "Spalling of Cu6Sn5 spheroids in the soldering reaction of eutectic SnPb on Cr/Cu/Au thin lms", J. Appl. Phys., 80(5), 2774-2780. https://doi.org/10.1063/1.363728
  14. Nah, J.W., Paik, K.W., Suh, J.O. and Tu, K.N. (2003), "Mechanism of electromigration-induced failure in the 97Pb-3Sn and 37Pb-63Sn composite solder joints", J. Appl. Phys., 94(12), 7560-7566. https://doi.org/10.1063/1.1628388
  15. Nah, J.W., Suh, J.O., Tu, K.N., Yoon, S.W., Rao, V.S., Kripesh, V. and Hua, F. (2006), "Electromigration in flip chip solder joints having a thick Cu column bump and a shallow solder interconnect", J. Appl. Phys., 100(12), 123513. https://doi.org/10.1063/1.2402475
  16. Shao, T.L., Chen, Y.H., Chiu, S.H. and Chen, C. (2004), "Electromigration failure mechanisms for SnAg3.5 solder bumps on Ti/Cr-Cu/Cu and Ni(P)/Au metallization pads", J. Appl. Phys., 96(8), 4518-4524. https://doi.org/10.1063/1.1788837
  17. Tu, K.N. (2003) "Recent advances on electromigration in very-large-scale-integration of interconnects", J. Appl. Phys., 94(9), 5451-5473. https://doi.org/10.1063/1.1611263
  18. Tu, K.N. (2007), Solder Joint Technology, Springer, NewYork, USA, 245-287.
  19. Tu, P.L., Chan, Y.C., Hung, K.C. and Lai, J.K.L. (2001), "Study of micro-BGA solder joint reliability", Microelectron. Reliab., 41(2), 287-293. https://doi.org/10.1016/S0026-2714(00)00217-1
  20. Xu, L.H., Han, J.K., Liang, J.J., Tu, K.N. and Lai, Y.S. (2008), "Electromigration induced high fraction of compound formation in SnAgCu flip chip solder joints with copper column", Appl. Phys. Lett., 92(26), 262104. https://doi.org/10.1063/1.2953692
  21. Xu, L.H., Pang, J.H.L. and Tu, K.N. (2006), "Effect of electromigration-induced back stress gradient on nanoindentation marker movement in SnAgCu solder joints", Appl. Phys. Lett., 89(22), 221909. https://doi.org/10.1063/1.2397549
  22. Yeh, E.C.C., Choi, W.J., Tu, K.N., Elenius, P. and Balkan, H. (2002), "Current-crowding-induced electromigration failure in flip chip solder joints", Appl. Phys. Lett., 80(4), 580-582. https://doi.org/10.1063/1.1432443
  23. Zang, L., Ou, S.Q., Huang, J., Tu, K.N., Gee, S. and Nguyen, L. (2006), "Effect of current crowding on void propagation at the interface between intermetallic compound and solder in flip chip solder joints", Appl. Phys. Lett., 88(1), 012106. https://doi.org/10.1063/1.2158702
  24. Zeng, K. and Tu, K.N. (2002), "Six cases of reliability study of Pb-free solder joints in electronic packaging technology", Mater. Sci. Eng., R. 38(2), 55-105. https://doi.org/10.1016/S0927-796X(02)00007-4

피인용 문헌

  1. Quantifying the dependence of Ni(P) thickness in ultrathin-ENEPIG metallization on the growth of Cu–Sn intermetallic compounds in soldering reaction vol.148, pp.1-2, 2014, https://doi.org/10.1016/j.matchemphys.2014.06.072
  2. Optimal Ni(P) thickness design in ultrathin-ENEPIG metallization for soldering application concerning electrical impedance and mechanical bonding strength vol.611, 2014, https://doi.org/10.1016/j.msea.2014.05.049
  3. CPI Parametric Investigation of UBM-Al Interface for Cu Pillar Flip-Chip Application vol.6, pp.7, 2016, https://doi.org/10.1109/TCPMT.2016.2571059
  4. Experimental and simulation analysis of concave-down resistance curve during electromigration in solder joints vol.115, pp.8, 2014, https://doi.org/10.1063/1.4867048
  5. Temperature-dependent failure mechanism of SnAg solder joints with Cu metallization after current stressing: Experimentation and analysis vol.114, pp.11, 2013, https://doi.org/10.1063/1.4821427
  6. Analysis of electrical parameters of InGaN-based LED packages with aging vol.66, 2016, https://doi.org/10.1016/j.microrel.2016.09.012
  7. Formation of Sn-rich phases via the decomposition of Cu6Sn5 compounds during current stressing vol.124, 2014, https://doi.org/10.1016/j.matlet.2014.03.071
  8. Effects of high current density on lead-free solder joints of chip-size passive SMD components vol.30, pp.2, 2018, https://doi.org/10.1108/SSMT-10-2017-0032
  9. Advances on high current load effects on lead-free solder joints of SMD chip-size components and BGAs pp.0305-6120, 2019, https://doi.org/10.1108/CW-11-2018-0088
  10. Ni Barrier Symmetry Effect on Electromigration Failure Mechanism of Cu/Sn–Ag Microbump vol.15, pp.2, 2019, https://doi.org/10.1007/s13391-018-00108-5
  11. NCF Trap이 Cu/Ni/Sn-Ag 미세범프의 Electromigration 특성에 미치는 영향 분석 vol.25, pp.4, 2012, https://doi.org/10.6117/kmeps.2018.25.4.083
  12. Enhancement of electromigration lifetime of copper lines by eliminating nanoscale grains in highly <111>-oriented nanotwinned structures vol.15, pp.None, 2021, https://doi.org/10.1016/j.jmrt.2021.11.111