Corrosion Science and Technology

The Corrosion Science Society of Korea (한국부식방식학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of Surface Pretreatment on the Corrosion Resistance of Epoxy-Coated Carbon Steel

  • Lee, DongHo (Protective coating and Corrosion center, Department of Industrial Chemistry, Pukyong National University) ;
  • Park, JinHwan (Protective coating and Corrosion center, Department of Industrial Chemistry, Pukyong National University) ;
  • Shon, MinYoung (Protective coating and Corrosion center, Department of Industrial Chemistry, Pukyong National University)
  • Received : 2012.09.03
  • Accepted : 2012.10.29
  • Published : 2012.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

The corrosion resistance of epoxy-coated carbon steel was evaluated. The carbon steel surface was subjected to different treatment methods such as steel grit blasting with different size, steel shot ball blasting and power tool treatment. To study the effect of the treatments, the topology of the treated surface was observed by optical 3D microscopy and a pull-off adhesion test was conducted. The corrosion resistance of the epoxy-coated carbon steel was further examined by electrochemical impedance spectroscopy (EIS) combined with hygrothermal cyclic testing. The results of EIS indicated that the epoxy-coated carbon steel treated with steel grit blasting showed an improved corrosion resistance compared to untreated epoxy-coated surfaces or surfaces subjected to shot ball blasting and power tool treatments.

Keywords

References

  1. C. A. May, Epoxy Resins, Chemistry and Technology, Marcel Dekker, New York (1988).
  2. T. M. Goulding, Epoxy Resin Adhesives, Handbook of Adhesive Technology, p. 531, A. Pizzi, K. L. Mittal, Eds., Marcel Dekker, New York (1994),.
  3. M. T. Aronhime and J. K. Gillham, J. Appl. Polym. Sci., 32, 3589 (1986). https://doi.org/10.1002/app.1986.070320218
  4. J. M. Zhou and J. P. Lucas, Polymer, 40, 5505 (1999). https://doi.org/10.1016/S0032-3861(98)00790-3
  5. L. Nunez, M. Villanueva, F. Fraga, and M. R Nunez, J. Appl. Polym. Sci., 74, 353 (1999). https://doi.org/10.1002/(SICI)1097-4628(19991010)74:2<353::AID-APP17>3.0.CO;2-J
  6. G. Z. Xiao and M. E. R Shanahan, J. Appl. Polym. Sci., 65, 449 (1997). https://doi.org/10.1002/(SICI)1097-4628(19970718)65:3<449::AID-APP4>3.0.CO;2-H
  7. G. W. Critchlow and D. M Brewis, Int. J. Adhesion Adhesives, 15, 173 (1995). https://doi.org/10.1016/0143-7496(95)91628-J
  8. Y. Gilibert, G. Verchery. Infuence of surface roughness on mechanical properties of joints, Plenum Press, New York, (1982).
  9. C. W. Jennings, Am Chem Soc Div., Org. Chem, 31, 184 (1971).
  10. J. P. Sargent, Int. J. Adhes Adhes, 14, 21 (1994). https://doi.org/10.1016/0143-7496(94)90017-5
  11. T. R. Katona, S. C. Batterman, Int. J. Adhes Adhes, 3, 85 (1983). https://doi.org/10.1016/0143-7496(83)90022-2
  12. K. J. Matsui, Adhesion, 10, 81 (1990).
  13. A. F. Harris, A. Beevers, Conf Proc Structural Adhesives in Engineering V. Bristol, Institute of Materials (1998).
  14. E. Sancaktar and R. Gomatam, J. Adhes. Sci. Technol., 15, 97 (2001). https://doi.org/10.1163/156856101743346
  15. M. Shahid and S. A. Hashim, Int J. Adhes. Adhes., 22, 235 (2002). https://doi.org/10.1016/S0143-7496(01)00059-8
  16. Gordon P. Bierwagen, L. He, J. Li, L. Ellingson, and D. E. Tallman, Prog. Org. Coat., 39, 67 (2000). https://doi.org/10.1016/S0300-9440(00)00106-5
  17. L. Valentinelli, J. Vogelsang, H. Ochs, and L. Fedrizzi, Prog. Org. Coating, 45, 405 (2002). https://doi.org/10.1016/S0300-9440(02)00137-6
  18. L. Fedrizzi, A. Bergo, F. Deflorian, and L. Valentinelli, Prog. Org. Coat., 48, 271 (2003). https://doi.org/10.1016/S0300-9440(03)00109-7
  19. S. Touzain, Q. Le Thu, and G. Bonnet, Prog. Org. Coat., 52, 311 (2005). https://doi.org/10.1016/j.porgcoat.2004.09.007
  20. L. Fedrizzi, A. Bergo, and M. Fanicchia, Electrochim. Acta, 51, 1864 (2006). https://doi.org/10.1016/j.electacta.2005.02.146
  21. ASTM D4541 - 09, Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers.
  22. ASTM B117 - 11, Standard Practice for Operating Salt Spray (Fog) Apparatus.
  23. NORSOK STANDARD M-501, Surface preparation and Protective coating, (2004).