Textile Coloration and Finishing (한국염색가공학회지)

The Korean Society of Dyers and Finishers (한국염색가공학회)
권호 표지
DOI QR코드

DOI QR Code

Surface Modification Effect and Mechanical Property of para-Aramid Fiber by Low-temperature Plasma Treatment

저온 플라즈마 처리를 이용한 파라 아라미드 섬유의 표면 개질 효과 및 역학적 특성

  • Park, Sung-Min (Korea Dyeing Technology Center) ;
  • Kwon, Il-Jun (Korea Dyeing Technology Center) ;
  • Kim, Myung-Soon (Korea Dyeing Technology Center) ;
  • Kim, Sam-Soo (Department of Textile Engineering and Technology, Yeungnam University) ;
  • Choi, Jae-Young (Department of Advanced Organic Materials Science & Engineering, Kyungpook National University) ;
  • Yeum, Jeong-Hyun (Department of Advanced Organic Materials Science & Engineering, Kyungpook National University)
  • 박성민 (한국염색기술연구소) ;
  • 권일준 (한국염색기술연구소) ;
  • 김명순 (한국염색기술연구소) ;
  • 김삼수 (영남대학교 융합섬유공학과) ;
  • 최재영 (경북대학교 바이오섬유소재학과) ;
  • 염정현 (경북대학교 바이오섬유소재학과)
  • Received : 2012.02.07
  • Accepted : 2012.04.27
  • Published : 2012.06.27
Download PDF
⟨ Previous Next ⟩

Abstract

para-Aramid fibers were treated by low-temperature plasma to improve the adhesion. The surface of para-aramid fibers were treated with gaseous plasma of several discharge power and treatment time in oxygen gas at 1Torr pressure. The treated fibers at low-temperature plasma were taken oxygen-containing functional groups and micro-crator on the surface. The modified fibers were measured by dynamic contact angle analyzer and XPS(X-ray photoelectron spectroscopy). The Interfacial adhesion properties of aramid fabric and polyurethane resin were determined by T-peel test. The surface of aramid fibers were observed by FE-SEM photographs. It was found that surface modification and chemical component ratio of the aramid fibers were improved wettability and adhesion characterization.

Keywords

References

  1. T. S. Lee, B. S. Kim, H. N. Choi, K. Y. Lee and S. G. Lee, Interfacial Adhesion Properties of Plasma Treated Aramid Fiber with Chloroprene Rubber, Textile Science and Engineering(J. Korean Fiber Society), 47(3), 1(2010).
  2. B. Park and K. Koo, Properties of Silicone-coated Fabric for Membrane Treated by Oxygen Low Temperature Plasma, Textile Coloration and Finishing (J. Korean Soc. Dyers & Finishers), 23(3), 195(2011). https://doi.org/10.5764/TCF.2011.23.3.195
  3. U. Plawky and M. Londschien, Surface Modification of an Aramid Fibre Treated in a Low-Temperature Microwave Plasma, J. Mater. Sci., 31(22), 6043(1996). https://doi.org/10.1007/BF01152157
  4. J. Hwang, Y. Qiu, C. Zhang, B. Jarrard, R. Stedeford, J. Tsai, Y. C. Park and M. Mccord, Effects of Atmospheric Pressure Helium/Air Plasma Treatment on Adhesion and Mechanical Properties of Aramid Fibers, J. Adhesion Sci. Technol., 17(6), 847(2003). https://doi.org/10.1163/156856103321645194
  5. L. Liu, Q. Jiang, T. Zhu, X. Guo, Y. Sun, Y. Guan and Y. Qiu, Influence of Moisture Regain of Aramid Fibers on Effects of Atmospheric Pressure Plasma Treatment on Improving Adhesion with Epoxy, J. Appl. Polym. Sci., 102(1), 242(2006). https://doi.org/10.1002/app.23639
  6. E. M. Kim and J. Jang, Surface Modification of Meta-aramid Films by UV/ozone Irradiation, Fibers. Polym., 11(5), 677(2010). https://doi.org/10.1007/s12221-010-0677-5
  7. J. Jang, S. I. Eom and Y. H. Kim, Coutinuous Surface Modification of PET Film via UV Irradiation, Textile Science and Engineering(J. Korean Fiber Society), 39(1), 100(2002).
  8. I. J. Kwon, S. M. Park, K. Koo, B. K. Song and J. W. Kim, Surface-Properties of Poly(Ethylene Terephthalate) Fabric by In-line Atmospheric Plasma Treatments, Textile Coloration and Finishing(J. Korean Soc. Dyers & Finishers), 19(4), 212(2007).
  9. D. W. Yun and J. Jang, Surface Modification of Ultra High Molecular Weight Polyethylene Films by UV/ozone Irradiation, Textile Coloration and Finishing(J. Korean Soc. Dyers & Finishers), 23(2), 76(2011). https://doi.org/10.5764/TCF.2011.23.2.76
  10. G. S. Sheu and S. S. Shyu, Surface Properties and Interfacial Adhesion Studies of Aramid Fibres Modified By Gas Plasmas, Comp. Sci. Technol., 52(4), 489(1994). https://doi.org/10.1016/0266-3538(94)90031-0
  11. Y. M. Park, J. H. Hwang and K. Koo, Functional Improvement of Poly(Vinyl Alcohol) Polarized Film by $O_2$ Low Temperature Plasma Treatment, Textile Coloration and Finishing(J. Korean Soc. Dyers & Finishers), 16(3), 144(2004).
  12. C. Jia, P. Chen, W. Liu, B. Li and Q. Wang, Surface Treatment of Aramid Fiber by Air Dielectric Barrier Discharge Plasma at Atmospheric Pressure, Appl. Surf. Sci., 257(9), 4165(2011). https://doi.org/10.1016/j.apsusc.2010.11.190

Cited by

  1. Characteristics of Recycled m-Aramid and TPP Complex Solutions in Preparation and Cotton Fibers after Coating vol.25, pp.4, 2013, https://doi.org/10.5764/TCF.2013.25.4.292
  2. Characteristic and Development of All-in-one Shock Energy Absorber Lanyard Protection Tube used Super Fibers vol.26, pp.2, 2014, https://doi.org/10.5764/TCF.2014.26.2.106
  3. Surface Modification Effect and Mechanical Property of para-aramid Fiber by Low-temperature Plasma Treatment vol.27, pp.1, 2015, https://doi.org/10.5764/TCF.2015.27.1.18