International Journal of Naval Architecture and Ocean Engineering

The Society of Naval Architects of Korea (대한조선학회)
권호 표지
DOI QR코드

DOI QR Code

Two-dimensional modeling of stepped planing hulls with open and pressurized air cavities

  • Published : 2012.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

A method of hydrodynamic discrete sources is applied for two-dimensional modeling of stepped planing surfaces. The water surface deformations, wetted hull lengths, and pressure distribution are calculated at given hull attitude and Froude number. Pressurized air cavities that improve hydrodynamic performance can also be modeled with the current method. Presented results include validation examples, parametric calculations of a single-step hull, effect of trim tabs, and performance of an infinite series of periodic stepped surfaces. It is shown that transverse steps can lead to higher lift-drag ratio, although at reduced lift capability, in comparison with a stepless hull. Performance of a multi-step configuration is sensitive to the wave pattern between hulls, which depends on Froude number and relative hull spacing.

Keywords

References

  1. Benedict, K., Kornev, N., Meyer, M. and Ebert, J., 2002. Complex mathematical model of the WIG motion including the take-off mode. Ocean Engineering, 29(3), pp.315-357. https://doi.org/10.1016/S0029-8018(01)00002-6
  2. Bertram, V., 2000. Practical Ship Hydrodynamics. Oxford : Butterworth-Heinemann.
  3. Butuzov, A.A., 1966. Limiting parameters of an artificial cavity formed on the lower surface of a horizontal wall. Fluid Dynamics, 1(2), pp.167-170.
  4. Butuzov, A.A., 1988. Spatial linearized problems on flow around ship bottom with artificial cavitation. Shipbuilding Problems, Ship Design Series 8, pp.1-18.
  5. Caponetto, M., 2001. Practical CFD simulations for planing hulls. Proceedings of the 2nd International Conference on High-Performance Marine Vehicles. Hamburg.
  6. Doctors, L.J., 1974. Representation of planing surfaces by finite pressure elements. Proceedings of the 5th Australian Conference on Hydraulics and Fluid Mechanics. Christchurch, New Zealand.
  7. Faltinsen, O.M., 2005. Hydrodynamics of High-Speed Marine Vehicles. New York : Cambridge University Press.
  8. Knapp, R.T., Daily, J.W. and Hammit, F.G., 1970. Cavitation. New York : McGraw-Hill.
  9. Lai, C. and Troesch, A.W., 1996. A vortex lattice method for high-speed planing. International Journal for Numerical Methods in Fluids, 22(6), pp.495-513. https://doi.org/10.1002/(SICI)1097-0363(19960330)22:6<495::AID-FLD353>3.0.CO;2-R
  10. Martin, M., 1978. Theoretical determination of porpoising instability of high-speed planing boats. Journal of Ship Research, 22, pp.32-53.
  11. Matveev, K.I., 2005. Application of artificial cavitation for reducing ship drag. Oceanic Engineering International, 9(1), pp.35-41.
  12. Matveev, K.I., 2007. Three-dimensional wave patterns in long air cavities on a horizontal plane. Ocean Engineering, 34(13), pp.1882-1891. https://doi.org/10.1016/j.oceaneng.2006.08.015
  13. Matveev, K.I. and Ockfen, A., 2009. Modeling of hard-chine hulls in transitional and early planing regimes by hydrodynamic point sources. International Shipbuilding Progress, 56(1-2), pp.1-13.
  14. Matveev, K.I., Burnett, T. and Ockfen, A., 2009. Study of air-ventilated cavity under model hull on water surface. Ocean Engineering, 36(12-13), pp.930-940. https://doi.org/10.1016/j.oceaneng.2009.06.004
  15. Payne, P.R., 1988. Design of High-Speed Boats: Planing. Fishergate, Annapolis, MD.
  16. Savitsky, D., 1964. Hydrodynamic design of planing hulls. Marine Technology, 1(1), pp.71-96.
  17. Squire, H.B., 1957. The motion of a simple wedge along the water surface. Proceedings of the Royal Society. 243(1232), pp.48-64. https://doi.org/10.1098/rspa.1957.0202