DOI QR코드

DOI QR Code

Influence of Concentric Saddle Shaped Coils on the Behavior of a Permanent Magnet Transverse Flux Machine with Segmented Construction

  • Baserrah, Salwa (Institute of Power Electronics and Electric Drives, IALB, University of Bremen) ;
  • Rixen, Keno (Sciegra Research and Technologies GmbH) ;
  • Orlik, Bernd (Institute of Power Electronics and Electric Drives, IALB, University of Bremen)
  • 투고 : 2011.11.09
  • 심사 : 2012.04.25
  • 발행 : 2012.06.30

초록

Flux concentrated permanent magnet transverse flux machines, FCPM-TFMs, with segmented stators require multi-turn concentric saddle coils to replace the ring coils, which are normally utilized in conventional layeredphase TFM constructions. In this paper, we investigate the influence of the shape of saddle phase windings and their parameter variations on the output torque productivity. Non-meshed coils evaluated via a finite element method (FEM) to examine the effect of the coil's location within one phase on machine performance. By using meshed coils, the analysis can be extended to inspect the distributions of magnetic field strength as well as current density in the coils. Throughout the study, the influence of design parameters on the output torque for two stator structures, i.e., a laminated and soft magnetic composite (SMC), are evaluated.

키워드

참고문헌

  1. S. Baserrah, K. Rixen, and B. Orlik, Proc. IEEE International Conf. on Power Electronics and Drive Systems 102 (2009).
  2. C. E. Carstensen, S. E. Bauer, R B. Inderka, and R. De Doncker, Proceedings of 20th International Electric Vehicle Symposium (2003).
  3. H. Burkhard, J. Phys.: Appl. Phys. 6, 357 (1975).
  4. G. Drago, P. Molfino, M. Repetto, G. Secondo, G. M. A. Lia, and P. L. Ribani, IEEE Trans. Magn. 28, 450 (1992). https://doi.org/10.1109/20.119908
  5. M. A. Green, IEEE Trans. Nuclear Science 14, 398 (1967). https://doi.org/10.1109/TNS.1967.4324589
  6. I. T. Rekanos, C. S. Antonopoulos, and T. D. Tsiboukis, IEEE Trans. Magn. 35, 1797 (1999). https://doi.org/10.1109/20.767380
  7. S. Baserrah, K. Rixen, and B. Orlik, Proceedings of PCIM 2010, 580 (2010).
  8. S. Baserrah, K. Rixen, and B. Orlik, Proceedings of PCIM 2010, 65 (2010).
  9. D. M. Ginsberg and M. J. Melchner, Review of Scientific Instruments 41, 122 (1970). https://doi.org/10.1063/1.1684235
  10. User's Guide of Flux Software 3, 48 (2009).
  11. S. Baserrah and B. Orlik, IEEE International Conf. on Power Electronics and Drive Systems 96 (2009).
  12. S. Baserrah, K. Rixen, and B. Orlik, Proc. International Conf. Electrical Machines and Systems 963 (2010).
  13. S. Baserrah, K. Rixen, and B. Orlik, J. Electrical Engineering and Technology 7, 184 (2012). https://doi.org/10.5370/JEET.2012.7.2.184
  14. S. Baserrah and B. Orlik, Proc. IEEE-IEMDC 630 (2011).
  15. J. A. Walker, D. G. Dorrell, and C. Cossar, IEEE Trans. Magn. 41, 3946 (2005). https://doi.org/10.1109/TMAG.2005.854973

피인용 문헌

  1. Design and Analysis for Loss Reduction of High-Speed Permanent Magnet Motor using a Soft Magnetic Composite vol.20, pp.4, 2015, https://doi.org/10.4283/JMAG.2015.20.4.444