References
-
J. H. Kim, M. Y. Kim and H. G. Kim, "
$NO_2$ -Assisted Soot Regeneration Behavior in a Diesel Particulate Filter with Heavy-duty Diesel Exhaust Gases," Numer. Heat Transfer, Part A, Vol.58, pp.725-739, 2010. https://doi.org/10.1080/10407782.2010.523293 - M. Y. Kim, "Performance Prediction of SCR-DeNOX System for Reduction of Diesel Engine NOX Emission," Transactions of KSAE, Vol.11, No.3, pp.71-76, 2003.
- B. Yun, C. Kim, M. Y. Kim, G. Cho, H. Kim and Y. Jeong, "Numerical Modeling of Vanadia-Based Commercial Urea-SCR plus DOC System for Heavy-duty Diesel Exhaust After Treatment System," Transactions of KSAE, Vol.18, No.2, pp.24-30, 2010.
- C. R. Swaminathan and V. R. Voller, "A General Enthalpy Method for Modeling Solidification Processes," Transaction of Metallurgical, Vol.23(B), pp.651-664, 1992. https://doi.org/10.1007/BF02649725
- Y. D. Hong and C. K. Park, "Numerical Analysis on Phase-change of Pure Water by Using Moving Grid," Fall Conference Proceedings, KSME, pp.1906-1911, 2002.
- K. G. Kang, H. S. Ryou and N. K. Hur, "Numerical Analysis of Solidification and Melting Phase Change Using Modified PISO Algorithm," Transactions of KSCFE, Vol.3, No.8, pp.12-20, 2003.
- H. K. Kim, S. Jeong, N. Hur, T. Lim and Y. S. Park, "Numerical Analysis of Melting Process in a Water Tank for Fuel-cell Vehicle," Transactions of SAREK, Vol.19, No.8, pp.585-592, 2007.
- J. Hwang, H. Heo and C. Lee, "The Thawing Characteristics of Frozen Urea Solution for Heating System Design of Urea-SCR System on Commercial Heavy Duty Vehicle," Annual Conference Proceedings, KSAE, pp.1065-1069, 2010.
- B. C. Choi, C. K. Seo and K. J. Myong, "Freezing and Melting Phenomena of Urea-water Solution for Diesel Vehicle SCR system," Transactions of KSPSE, Vol.4, No.13, pp.5-10, 2009.
- W. Stefan, "Numerical Heat Transfer and Thermal Engineering of AdBlue(SCR) Tanks for Combustion Engine Emission Reduction," Applied Thermal Engineering, Vol.27, pp.1790-1798, 2007. https://doi.org/10.1016/j.applthermaleng.2007.01.008
- C. Gau, and R. Viskanta, "Melting and Solidification of a Pure Metal on a Vertical Wall," Journal of Heat Transfer, Vol.108, pp.174-181, 1986. https://doi.org/10.1115/1.3246884
- A. D. Brent, V. R. Voller and K. J. Reid, "The Enthalpy-porosity Technique for Modeling Convection-diffusion Phase Change: Application to The Melting of a Pure Metal," Numer. Heat Transfer, Vol.13, pp.295-318, 1988.
- M. Sathiyamoorthy and A. Chamkha, "Effect of Magnetic Field on Natural Convection Flow in a Liquid Gallium filled Square Cavity for Linearly heated side Wall(s)," Int. J. Thermal Sciences, Vol.49, pp.1856-1856, 2010. https://doi.org/10.1016/j.ijthermalsci.2010.04.014
- Fluent, Release 12.0 User's Guide, 2009.
- M. Egal, T. Budtova and P. Navard, "The Dissolution of Microcrystalline Cellulose in Sodium Hydroxide-Urea Aqueous Solution," Cellulose, Vol.15, pp.361-370, 2008. https://doi.org/10.1007/s10570-007-9185-1
- M. M. Cerimele, D. Mansutti and F. Pistella, "Numerical Modelling of Liquid/Solid Phase Transitions Analysis of a Gallium Melting Test," Computers & Fluids, Vol.31, pp.437-451, 2002. https://doi.org/10.1016/S0045-7930(01)00062-7
- B. Xu, B. Q. Li and D. E. Stock, "An Experimental Study of Thermally induced Convection of Molten Gallium in Magnetic Fields," Int. J. Heat Mass Transfer, Vol.49, pp.2009-2019, 2006. https://doi.org/10.1016/j.ijheatmasstransfer.2005.11.033
- S. Kim, M. C. Kim and B. Lee, "Numerical Analysis of Convection-driven Melting and Solidification in a Rectangular Enclosure," J. Ind. Eng. Chemistry, Vol.8, No.2, pp.185-190, 2002.
Cited by
- A Numerical Study on the Flow Characteristics in the Catalytic Muffler with Different Inlet and Outlet Configurations vol.21, pp.5, 2013, https://doi.org/10.7467/KSAE.2013.21.5.059
- Numerical Investigation of Urea Freezing and Melting Characteristics Using Coolant Heater vol.37, pp.8, 2013, https://doi.org/10.3795/KSME-B.2013.37.8.717
- Effects of Supply Power and Environmental Conditions on Urea Coolant Melting Phenomena in Urea Supply Lines in Vehicles vol.11, pp.5, 2018, https://doi.org/10.3390/en11051099