동력기계공학회지 (Journal of Power System Engineering)

  • 제16권2호
  • /
  • Pages.60-65
  • /
  • 2012
  • /
  • 2713-8429(pISSN)
  • /
  • 2713-8437(eISSN)
한국동력기계공학회 (The Korean Society for Power System Engineering)
권호 표지
DOI QR코드

DOI QR Code

소비에너지 절약을 위한 공기압 실린더 구동장치의 파라미터 선정방법

A Study on the Selection Method of Parameters for Energy Saving in Pneumatic Cylinder Driving Apparatus

  • Jang, J.S. (Department of Mechanical System Engineering, Pukyong National University)
  • 투고 : 2011.09.26
  • 심사 : 2011.11.12
  • 발행 : 2012.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Pneumatic actuators are clean, lightweight, and can be easily serviced, whereas low energy efficiency has been considered as a critical shortcoming compared with corresponding hydraulic and electrical actuators. This study describes a new design method of pneumatic cylinder driving apparatus by lowering a supply pressure. The simulation study demonstrates that the designed system with the proposed method can operate at the smaller energy consumption state compare to the designed system with the conventional method for the specified working conditions.

키워드

참고문헌

  1. Takahashi, T., 1996, "Energy Saving for Pneumatic Systems", Journal of the Japan Hydraulics and Pneumatics Society, Vol. 27, No. 3, pp. 362-365.
  2. The Energy Resources Center of the Illinois Industries of the Future, "Best practices compressed air", http://www.erc.uic.edu/iof/ comp_air.html.
  3. Naotake, O., 2003, "Energy Saving for Pneumatic System", 財團法人省エネルギーセン タ.
  4. Luo, X., Sun, H. and Wang, J., 2011, "An Energy Efficient Pneumatic-electrical System and Control Strategy Development", 2011 American Control Conference, pp. 4743-4748.
  5. Ogawa, T., 1996, "Energy Saving for Pneumatic Systems & Equipments", Journal of the Japan Hydraulics & Pneumatics Society, Vol. 27, No. 3, pp. 378-382.
  6. Shen, X. and Goldfarb, M., 2007, "Energy Saving in Pneumatic Servo Control Utilizing Inter-Chamber Cross-Flow", ASME J. Dyn. Sys., Meas., Control, Vol. 129, Issue 3, 303. https://doi.org/10.1115/1.2718244
  7. Terashima, Y., Kawakami, Y. and Kawai, S., 2000, "An Approach for Energy Conservation in Pneumatic Systems(1st Report)", Trans. of The Japan Hydraulics & Pneumatics Society, Vol. 31, No. 6, pp. 157-163.
  8. 日本油空壓工業会, 1990, "實用空氣壓ポケットブック", タカラ印刷紙工株式会社, p. 363.
  9. Doyle, J. C., Francis, B. A. and Tannenbaum, A. R., 1992, "Feedback Control Theory", Macmillan Publishing Company, pp. 51-56.