References
- Nicholls, D. J., 1994, "The Relation Between Crack Blunting and Fatigue Crack Growth Rates," Fatigue Fracture of Engineering Materials and Structures, Vol. 17, No. 4, pp. 459-467. https://doi.org/10.1111/j.1460-2695.1994.tb00245.x
- Berger, F. and Zouhar, G., 2000, "A New Approach to the Correlation Between the Coefficient and the Exponent in the Power Law Equation of Fatigue Crack Growth," International Journal of Fatigue, Vol. 22, pp. 229-230. https://doi.org/10.1016/S0142-1123(99)00123-1
- Carpinteri, A. and Paggi, M., 2007, "Are the Paris' Law Parameters Dependent on Each Other," Atti del Congresso IGF19, pp. 217-224.
- Nguyen, O., Repetto, E. A., Ortiz, M. and Radovitzky, R. A., 2001, "A Cohesive Model of Fatigue Crack Growth," International Journal of Fracture, Vol. 110, pp. 351-369. https://doi.org/10.1023/A:1010839522926
- Fan. F., Kalnaus, S. and Jiang, Y., 2008, "Modeling of Fatigue Crack Growth of Stainless Steel 304L," Mechanics of Materials, Vol. 40, pp. 961-973. https://doi.org/10.1016/j.mechmat.2008.06.001
- Seifi, R. and Bahrami, R., 2010, "Numerical Modeling the Effects of Overloading and Underloading in Fatigue Crack Growth," Engineering Failure Analysis, Vol. 17, pp. 1475-1482. https://doi.org/10.1016/j.engfailanal.2010.05.009
- ABAQUS 6.10 keywords Reference Manual.
- Sander, M. and Richard, H. A., 2005, "Finite Element Analysis of Fatigue Crack Growth with Interspersed Mode I and Mixed Mode Overloads," International Journal of Fatigue, Vol. 27, pp. 905-913. https://doi.org/10.1016/j.ijfatigue.2004.10.008
- Chu, S. J., 2011, "True Stress-True Strain Curves Obtained by Simulating Tensile Tests Using the Finite Element Program," Trans. of the KSME(A), Vol. 35, pp. 25-31.
- Kim, J. R. Rasmussen, 2001, "Full-Range Stress-Strain Curves for Stainless Steel Alloys," The University of Sydney, Research Report No. R811.
- Jono, M. and Song, J. H., 2006, Fatigue Cracks, Intervision, pp. 78-79.
- Davis, J. R., 1996, Stainless Steels, ASM Speciality Handbook, p. 52.
Cited by
- 3D Analysis of Crack Growth in Metal Using Tension Tests and XFEM vol.38, pp.4, 2014, https://doi.org/10.3795/KSME-A.2014.38.4.409
- 3D Analysis of Crack Behavior Using XFEM vol.789-790, pp.1662-7482, 2015, https://doi.org/10.4028/www.scientific.net/AMM.789-790.278