DOI QR코드

DOI QR Code

A Study on the Design and Electrical Characteristics Enhancement of the Floating Island IGBT with Low On-Resistance

  • Jung, Eun-Sik (Dept. of Electrical Engineering, Korea University) ;
  • Cho, Yu-Seup (Dept. of Electrical Engineering, Korea University) ;
  • Kang, Ey-Goo (Dept. of Photovoltaic Engineering, Far East University) ;
  • Kim, Yong-Tae (Semiconductor Materials and Devices Laboratory, Korea Institute of Science and Technology) ;
  • Sung, Man-Young (Dept. of Electrical Engineering, Korea University)
  • Received : 2011.09.16
  • Accepted : 2012.02.08
  • Published : 2012.07.01

Abstract

Insulated Gate Bipolar Transistors(IGBTs) have received wide attention because of their high current conduction and good switching characteristics. To reduce the power loss of IGBT, the onstate voltage drop should be lowered and the switching time should be shortened. However, there is trade-off between the breakdown voltage and the on-state voltage drop. The FLoatingIsland(FLI) structure can lower the on-state voltage drop without reducing breakdown voltage. In this paper, The FLI IGBT shows an on-state voltage drop that is 22.5% lower than the conventional IGBT, even though the breakdown voltages of each IGBT are almost identical.

Keywords

References

  1. E.G. Kang, B. J. Kim, and Y.H.Lee, J.KIEEME 23, 1 (2010)
  2. Y. I. Choi, J. KIEE, Vol. 46, No. 2, 1997
  3. B. J. Baliga, "Fundamentals of power semiconductor devices", Springer, 2008
  4. B. J. Baliga, "Power semiconductor devices", PWS Publishing Company, 1996
  5. N. Cezac, F. Morancho, P. Rossel, H. Tranduc, A. Peyre-Lavigne, "A new generation of power unipolar devices : the concept of the FLoating Island MOS Transistor(FLIMOST)", ISPSD, 2000