References
- D. J. Fasbinder, "Clinical performance of chairside CAD/CAM restorations," J. Am. Dent. Assoc., 137, 22S-31S (2006).
- D. Eggbeer, R. Bibb, R. Williams, "The computer-aided design and rapid prototyping fabrication of removable partial denture frameworks," Proc. Inst. Mech. Eng. H., 219(3), 195-202 (2005).
- R. J. Williams, R. Bibb, T. Rafik, "A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying," J. Prosthet. Dent., 91(1), 85-88, (2004). https://doi.org/10.1016/j.prosdent.2003.10.002
- R. J. Williams, R. Bibb, D. Eggbeer, J. Collis, "Use of CAD/CAM technology to fabricate a removable partial denture framework," J. Prosthet. Dent., 96(2), 96-99 (2006). https://doi.org/10.1016/j.prosdent.2006.05.029
- R. J. Williams, R. Bibb, D. Eggbeer, "CAD/CAM in the Fabrication of Removable Partial Denture Frameworks: A Virtual Method of Surveying 3D Scanned Dental Casts," Quintessence J. Dent. Technol., 2, 268-276 (2004).
- M. F. Abbate, A. H. Tjan, W. M. Fox, "Comparison of the marginal fit of various ceramic crown systems," J. Prosthet. Dent., 61(5), 527-531 (1989). https://doi.org/10.1016/0022-3913(89)90270-9
- P. Tan, D. Gratton, A. Diaz-Arnold, D. Holmes, "An in vitro comparison of vertical marginal gaps of CAD/CAM titanium and conventional cast restorations," J. Prosthodont., 17(5), 378-383 (2008). https://doi.org/10.1111/j.1532-849X.2008.00302.x
- M. R. Baig, K. B. Tan, J. I. Nicholls, "Evaluation of the marginal fit of a zirconia ceramic computer-aided machined (CAM) crown system," J. Prosthet. Dent., 104(4), 216-227 (2010). https://doi.org/10.1016/S0022-3913(10)60128-X
- A. Ortorp, D. Jonsson, A. Mouhsen, P. Vult von Steyern, "The fit of cobalt-chromium three-unit fixed dental prostheses fabricated with four different techniques: a comparative in vitro study," Dent. Mater., 27(4), 356-363 (2011). https://doi.org/10.1016/j.dental.2010.11.015
- S. Reich, M. Wichmann, E. Nkenke, et al., "Clinical fit of allceramic three-unit fixed partial dentures, generated with three different CAD/CAM systems," Eur. J. Oral Sci., 113(2), 174-179 (2005). https://doi.org/10.1111/j.1600-0722.2004.00197.x
- A. Syrek, G. Reich, D. Ranftl, C. Klein, B. Cerny, J. Brodesser, "Clinical evaluation of all-ceramic crowns fabricated from intraoral digital impressions based on the principle of active wavefront sampling," J. Dent., 38(7), 553-559 (2010). https://doi.org/10.1016/j.jdent.2010.03.015
- M. R. Fenlon, A. S. Juszczyk, R. J. Hughes, J. D. Walter, M. Sherriff, "Accuracy of fit of cobalt-chromium removable partial denture frameworks on master casts," Eur. J. Prosthodont. Restor. Dent., 1(3), 127-130 (1993).
- D. Dunham, J. S. Brudvik, W. J. Morris, K. D. Plummer, S. M. Cameron, "A clinical investigation of the fit of removable partial dental prosthesis clasp assemblies," J. Prosthet. Dent., 95(4), 323-326 (2006). https://doi.org/10.1016/j.prosdent.2006.02.001
- V. Gowri, N. P. Patil, R. K Nadiger, S. S. Guttal, "Effect of anchorage on the accuracy of fit in removable partial denture framework," J. Prosthodont., 19(5), 387-390 (2010). https://doi.org/10.1111/j.1532-849X.2010.00594.x
- M. Augthun, M. Zyfuss, H. Spiekermann, "The influence of spruing technique on the development of tension in a cast partial framework," Int. J. Prosthodont., 7(1), 72-76 (1994).
- R. W. Rudd, K. D. Rudd, "A review of 243 errors possible during the fabrication of a removable partial denture," J. Prosthet. Dent., 86(3), 251-261 (2001). https://doi.org/10.1067/mpr.2001.118021
- D. N. Firtell, A. M. Muncheryan, A. J. Green, "Laboratory accuracy in casting removable partial denture frameworks," J. Prosthet. Dent., 54(6), 856-860 (1985). https://doi.org/10.1016/0022-3913(85)90488-3
- Y. Sun, P. Lu, Y. Wang, "Study on CAD & RP for removable complete denture," Computer Methods and Programs in Biomedicine, 93(3), 255-272 (2009).