상시진동을 이용한 CANDU형 격납건물의 동적파라미터 산정

Dynamic Parameter Estimation of a CANDU Type Containment Using Ambient Vibration Measurements

  • Choi, Sanghyun (Department of Railroad Facility Engineering, Korea National University of Transportation) ;
  • Park, Sooyong (Department of Architecture and Ocean Space, Korea Maritime University) ;
  • Hyun, Chang-Hun (Structural Systems and Site Evaluation Department, Korea Institute of Nuclear Safety) ;
  • Kim, Moon-Soo (Structural Systems and Site Evaluation Department, Korea Institute of Nuclear Safety)
  • 발행 : 2012.06.30

초록

고유진동수와 같은 동적파라미터는 구조물 전체의 강성에 대한 정보를 제공할 수 있어 격납건물과 같은 대형구조물의 건전성 모니터링에 유용하게 사용될 수 있다. 이러한 동적특성을 구조물의 사용성에 지장을 주지 않고 추출하기 위해서는 상시진동을 이용한 모달해석 기법의 적용이 필수적이다. 이 연구에서는 상시진동 측정자료를 이용하여 월성 2호기 격납건물의 동적파라미터를 산정하였다. 연구의 가능성은 격납건물의 수치해석모델을 이용하여 검증하였다. 월성 2호기 격납건물에서 측정된 상시진동에 대한 모달해석 결과 해석모드와 충분한 상관성을 갖는 동적파라미터를 산정할 수 있었다.

Dynamic parameters such as natural frequencies can provide global stiffness information of a structure, and thus be utilized in monitoring structural integrity of large structures such as a containment. To identify the dynamic parameters without interrupting normal operation, a modal analysis method based on ambient vibration measurements should be applied. In this study, dynamic parameters of the containment of Wolsong Unit 2 are identified using ambient vibration measurement data. The feasibility of the study is verified using a numerical model for the containment. From the modal analysis, dynamic parameters of the containment with acceptable correlation to analytical modes can be estimated.

키워드

참고문헌

  1. Allemang, R.J., Brown, D.L. (1982). "A correlation coefficient for modal vector analysis." Proceedings of 1st International Modal Analysis Conference (IMAC), Orlando, FL.
  2. Bendat, J.S., Piersol, A.G. (1993). Engineering Applications of Correlation and Spectral Analysis. Wiley Interscience, New York. USA.
  3. Choi, S., Park, S., Hyun, C.-H., Kim, M.-S., Choi K.-R. (2010). "Modal parameter identification of a containment using ambient vibration measurements." Nuclear Engineering and Design, Vol.240, pp.453-460. https://doi.org/10.1016/j.nucengdes.2009.11.037
  4. Hahm, D., Choi, I.-K., Lee, H.-P. (2010). "Assessment of internal pressure fragility of the CANDU type containment buildings using nonlinear finite element analysis." Journal of Comutational Structural Engineering Institute of Korea Vol.23, No.4, pp.445-452.
  5. Kato, M., Watanabe, Y., Kato, A., Takeda, T., Tsunoda, T., Yamaguchi, T., Itoh, M., Yasui, Y., Wakamatsu, K., Kaneko, M., Kurimoto, O., Nakamura, M., Kuno, T., Miyamoto, O., Murahashi, H., Yamamoto, M. (1989). "Forced vibration tests on the reactor building of Tsuruga Unit No. 2 nuclear power station." Nuclear Engineering and Design, Vol.111, pp.327-340. https://doi.org/10.1016/0029-5493(89)90243-4
  6. Korea Electric Power Corporation (KEPCO) (1996). Wolsong Units 2, 3, 4 Final Safety Analysis Report.
  7. Korea Institute of Nuclear Safety (KINS) (2010). Estimation of the Effective Properties of Containment Buildings Using Ambient Vibration Measurements. KINS/HR-985.
  8. Michel, C., Gueguen, P., Bard, P.-Y. (2008). "Dynamic parameters of structures extracted from ambient vibration measurements: an aid for the seismic vulnerability assessment of existing buildings in moderate seismic hazard regions." Soil Dynamics and Earthquake Engineering, Vol.28, pp.593-604. https://doi.org/10.1016/j.soildyn.2007.10.002
  9. Muto, K., Hayashi, T., Omatsuzawa, K., Ohta, T., Uchida, K., Kasai, Y. (1974). "Comparative forced vibration test of two BWR-type reactor buildings." Nuclear Engineering and Design, Vol.27, pp.220-227. https://doi.org/10.1016/0029-5493(74)90112-5
  10. Nakagawa, S., Kuno, M., Naito, Y., Nozawa, T., Momma, T., Mizuno, J., Tsukamoto, T., Motohashi, S., Niwa, M. (1998). "Forced vibration tests and simulation analysis of a nuclear reactor building." Nuclear Engineering and Design, Vol.179, pp.145-156. https://doi.org/10.1016/S0029-5493(97)00269-0
  11. Naus, D.J., Oland, C.B., Ellingwood, B.R., Graves III, H.L., Norris, W.E. (1996). "Aging management of containment structures in nuclear power plants." Nuclear Engineering and Design, Vol.166, pp.367-379. https://doi.org/10.1016/S0029-5493(96)01254-X
  12. Smith, C.B., Matthiesen, R.B. (1973). "Vibration testing of full-scale structures." Nuclear Engineering and Design, Vol.25, pp.17-29. https://doi.org/10.1016/0029-5493(73)90058-7
  13. Srinivasan, M.G., Kot, C.A., Hsieh, B.J., Chung, H.H. (1981). "Dynamic testing of as-built nuclear power plant buildings:an evaluative review." Nuclear Engineering and Design, Vol.66, pp.97-115. https://doi.org/10.1016/0029-5493(81)90184-9
  14. Srinivasan, M.G., Kot, C.A., Hsieh, B.J. (1984). Verification of Experimental Modal Modeling Using HDR (Heissdampfreaktor) Dynamic Test Data. NUREG/CR-4021 (ANL-84-25), Argonne National Lab, USA.