Journal of the Korean GEO-environmental Society (한국지반환경공학회 논문집)

Korean Geo-Environmental Society (한국지반환경공학회)
권호 표지

The Case of Measurement for Shallow Soil Tunnel with Pre-Supported Nail Method

저토피 토사터널에 적용된 선지보 네일공법의 시공 및 계측사례

  • 서동현 (주식회사 현이앤씨) ;
  • 이승호 (상지대학교 공과대학 토목공학과)
  • Published : 2012.11.01
⟨ Previous Next ⟩

Abstract

This pre-supported nail method is able to decrease ground displacements more than NATM because this method reinforces ground with grouted steels before tunnel excavation. Therefore this method has advantage of being able to increase the stability and workability. This study presents applicability of pre-supported nail method with case of site measurement for shallow tunnel composed with high groundwater level and unconsolidated soil, performs this research the mechanism of new supporting system is compared with the conventional existing supporting system in terms of soil reinforcement. NATM has characteristics that construction stage displacement of the apparent height difference is observed in the step of divided excavation processing. Otherwise it is analyzed that pre-supported nail method is not sensitive in the displacement problem of excavation processing in comparison to NATM. It is found that this method is very applicable in shallow depth tunnel such as portal area, tunnel in soil and weak zone without arching effect.

선지보 네일공법은 터널의 굴착 전에 지반을 보강하므로 기존 지보시스템에 의한 NATM공법에 비해 굴착과정에서 변위를 최소화할 수 있어 안정성과 시공효율을 높일 수 있는 장점이 있다. 본 연구에서는 지하수위가 높고 미고결지반으로 구성된 천층터널에 대해 선지보 네일공법의 적용성을 현장계측관리 사례을 통해 연구하였으며, 지반보강개념에서 선지보 네일공법의 메카니즘과 기존 지보시스템의 메카니즘을 비교 분석하였다. 상하분할 굴착과정에서 굴착단계별 변위증폭이 뚜렷이 관찰되는 기존 지보시스템에 비해 선지보 네일공법은 초기변위 이후 단계굴착별 변위증폭량이 작고 이내 수렴되는 경향을 보여 다단굴착으로 인한 영향이 미미한 것으로 분석되었다. 선지보 네일공법은 종래 NATM공법과 비교할 때 단계굴착 시 응력변화에 대해 민감하고 아칭효과가 발생되지 않는 취약한 지반 즉, 토사터널인 천층터널에서 그 적용성이 뛰어난 것으로 판단된다.

Keywords

References

  1. Chae, S. E.(2009), A Study of PNT Method by Numerical Analysis, Master's Thesis, University of Kunkuk, pp. 17-20.
  2. Ilshin Engineering(2010a), The Monthly Report of Measurement on Construction Work of Ulsan Pohang Expressway(Lot No. ${\bigcirc}$), Vol. 1, pp. 19-21.
  3. Ilshin Engineering(2010b), The Monthly Report of Measurement on Construction Work of Ulsan Pohang Expressway(Lot No. ${\bigcirc}$), Vol. 2, pp. 19-21.
  4. Ilshin Engineering(2010c), The Monthly Report of Measurement on Construction Work of Ulsan Pohang Expressway(Lot No. ${\bigcirc}$), Vol. 3, pp. 19-21.
  5. Kalman Kovari, Kim, Y. G(1996), A Study of Mistake about NATM Concept, Journal of Korea Society for Rock Mechanics, Vol. 6, pp. 75-87.
  6. Kim, S. H., Youn, S. K. and Seo, D. H.(2009), New High-performance Supporting System of Shallow Tunnel in Soil, Journal of the Korean Geotechnical Society, Vol. 25, No. 7, pp. 11-21.
  7. Korea Expressway Corporation(2009), The Report of Tunnel Numerical Analysis on Construction Work of Ulsan Pohang Expressway(Lot No. ${\bigcirc}$), pp. 110-133.
  8. Korea Expressway Corporation(2010), The Soil Report of ${\bigcirc}{\bigcirc}$ Tunnel on Construction Work of Ulsan Pohang Expressway(Lot No. ${\bigcirc}$), pp. 2-24.
  9. Korean Geotechnical Society(1998), Geotechnical Engineering Series 7 Tunnel, Goomibook, pp. 349-352.
  10. Lee, S. H., Chun, S. Y., Seo, D. H. and Choi, J. H.(2012), A Study of Characteristic Behaviors on the Wide Section Tunnel with Pre-support Nailing, World Tunnel Congress 2012, Bangkok, Thailand, pp. 696-698.